Metra 95-6542 Manual

Metra Ikke kategoriseret 95-6542

Læs gratis den danske manual til Metra 95-6542 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Metra 95-6542, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

I N S TA L L A T I O N I N S T R U C T I O N S

95-6542

KIT FEATURES

• ISO DDIN radio provision

• Textured radio trim panel

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) Radio bezel cut template • D) Sub-dash cut template • E) (1) Speed clip

TOOLS REQUIRED

• Panel removal tool • 3/8” socket wrench

• Cutting tool

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Preparation .......................................................2

Kit Assembly ..........................................................3

WIRING & ANTENNA CONNECTIONS

Wiring Harness: • 70-1817 (sold separately)

Antenna adapter: • Not required

A B C D E

Dodge Dakota 1997-2000

Dodge Durango 1998-2000

1.800.221.0932

MetraOnline.com

1. Place the vehicle in park and apply the

parking brake.

2. With the key in the ignition position,

apply the foot brake and place the

shifter in low gear.

3. Tilt the steering wheel all the way down.

4. Unclip the entire dash bezel, unplugging

any wire harnesses necessary to allow

complete removal. (Figure A)

5. Remove the (2) 3/8” hex head screws

securing the radio, then unplug

and remove.

Continue to Kit Preparation

1. Clip the

radio bezel cut template

onto

the factory dash bezel, and then mark

the inside of the opening. (Figure A)

2. Remove the template, and then carefully

cut along the lines. Set aside for

Kit Assembly.

3. Place the

sub-dash cut template

into the

radio cavity in the dash, and then mark

the inside of the opening. (Figure B)

4. Remove the template, and the lower left

speed clip from the cavity, then carefully

cut the shaded areas marked out with a

suitable cutting tool.

5. Insert the

speed clip

provided with the

kit into the lower left position where the

factory clip was removed.

Continue to Kit Assembly

(Figure B)

(Figure A) (Figure A)

DASH DISASSEMBLY KIT PREPARATION

Remove shaded area

Produkt Specifikationer

Mærke:	Metra
Kategori:	Ikke kategoriseret
Model:	95-6542

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra 95-6542 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Metra Manualer

Metra 99-8216 Manual

3 Juni 2025

Metra 72-8110 Manual

18 Marts 2025

Metra BLK-9600 Manual

11 Marts 2025

Metra 99-7386B Manual

11 Marts 2025

Metra 82-8602 Manual

13 Januar 2025

Metra 99-8274 Manual

13 Januar 2025

Metra 95-7642 Manual

1 Januar 2025

Metra 95-7022HG Manual

1 Januar 2025

Metra Axxess AXUSB-TY5 Manual

11 December 2024

Metra 71-017C Manual

26 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Festo DFM-32-100-B-PPV-A-KF Manual

17 Juni 2025

Playtive IAN 285777 Manual

17 Juni 2025

Festo VAEM-L1-S-M3-26 Manual

17 Juni 2025

Festo DFPC-320 Manual

17 Juni 2025

EFX ICAK12 Manual

17 Juni 2025

Bearware 307294 Manual

17 Juni 2025

Futaba MC-9200H/A Manual

17 Juni 2025

Hansgrohe AXOR Montreux 16517800 Manual

17 Juni 2025

OmniMount 2N1-S Manual

17 Juni 2025

Festo DSNU-S-12- -F1A Manual

17 Juni 2025