Metra 95-7353CH Manual

Metra Ikke kategoriseret 95-7353CH

Læs gratis den danske manual til Metra 95-7353CH (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Metra 95-7353CH, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

REV. 7/29/2015 INST95-7353CH

Installation instructions for part 95-7353CH

CAUTION!

Metra recommends disconnecting the negative bat

tery terminal before beginning any installation, unless the vehicle

manufacturer recommends against so. Please check with your local

Dealership for more information. All accessories, switches, climate

controls panels, and especially air bag indicator lights must be con

nected before reconnecting the battery or cycling the ignition. Also,

do not remove the factory radio with the key in the on position, or the

vehicle running. It would be best to remove the key from the ignition

and then wait a few seconds before removing the factory radio.

• ISO DDIN radio provision

• Painted Charcoal

• A) Radio housing trim panel • B) Radio brackets • C) Start/Stop switch blank plate

• D) Airbag light blank plate • E) (5) #8 x 3/8” Phillips truss-head screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7304

Antenna Adapter: • Not required

• Panel removal tool • Phillips screwdriver • Socket wrench

TOOLS REQUIRED

Dash Disassembly ................................................. 2

Kit Preparation ....................................................... 3

Kit Assembly

– ISO DDIN radio provision 3 ......................................

Table of Contents

A B C D E

95-7353CH

1. Unclip and remove the factory

radio trim panel including the a/c

vents. (Figure A)

Note: Remove the (8) retaining

clips to be reused in Kit Assembly.

2. Remove (4) Phillips screws

securing the radio in the dash.

3. Remove (2) Phillips screws

securing the start/stop switch if

equipped. (Figure B)

Dash Disassembly

(Figure A)

Remove (4) Phillips screws securing

the storage pocket (Figure B)

5. Remove the (8) Phillips screws

securing the a/c vents then unclip

and remove them from the radio

trim panel. (Figure B)

6. Unclip and remove the hazard

switch. (Figure B)

7. Remove (3) Phillips screws

securing the passenger air bag

indicator. (Figure B)

Continue to kit preparation

(Figure B)

Step 3

Step 4

Step 5

Step 6

Step 7

Produkt Specifikationer

Mærke:	Metra
Kategori:	Ikke kategoriseret
Model:	95-7353CH

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra 95-7353CH stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Metra Manualer

Metra 99-8216 Manual

3 Juni 2025

Metra 72-8110 Manual

18 Marts 2025

Metra BLK-9600 Manual

11 Marts 2025

Metra 99-7386B Manual

11 Marts 2025

Metra 82-8602 Manual

13 Januar 2025

Metra 99-8274 Manual

13 Januar 2025

Metra 95-7642 Manual

1 Januar 2025

Metra 95-7022HG Manual

1 Januar 2025

Metra Axxess AXUSB-TY5 Manual

11 December 2024

Metra 71-017C Manual

26 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg CVI120GE Manual

17 Juni 2025

Panduit VS-CKP4-000 Manual

17 Juni 2025

Yamazen LTH-2BH Manual

17 Juni 2025

Philips ASH4511CH Manual

17 Juni 2025

Yamazen MNW-1890CJ Manual

17 Juni 2025

D-Link DMC-700SC Manual

17 Juni 2025

Makita DHP490 Manual

17 Juni 2025

Royal Catering RC-BFWH12030 Manual

17 Juni 2025

Makita TW011G Manual

17 Juni 2025

Philips 50BDL2050Q Manual

17 Juni 2025