Metra 95-7366B Manual

Metra Ikke kategoriseret 95-7366B

Læs gratis den danske manual til Metra 95-7366B (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Metra 95-7366B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

REV. 9/21/2015 INST95-7366B

Installation instructions for part 95-7366B

CAUTION!

Metra recommends disconnecting the negative bat

tery terminal before beginning any installation, unless the vehicle

manufacturer recommends against so. Please check with your local

Dealership for more information. All accessories, switches, climate

controls panels, and especially air bag indicator lights must be con-

nected before reconnecting the battery or cycling the ignition. Also,

do not remove the factory radio with the key in the on position, or the

vehicle running. It would be best to remove the key from the ignition

and then wait a few seconds before removing the factory radio.

• ISO DDIN radio provision

• Painted scratch resistant black

• A) Radio trim panel • B) Radio brackets

20;-,(;<9,:

20;*64765,5;:

>0905.(5;,55(*655,*;065: (sold separately)

Wiring Harness: • 70-7304, HYBL-04

Antenna Adapter: • Not required

• Panel removal tool • Phillips screwdriver • 10mm Socket wrench • Cutting tool

;663:9,8<09,+

Kia Sorento 2016-up

95-7366B

A B

Dash Disassembly ................................................. 2

Kit Preparation ....................................................... 2

Kit Assembly .......................................................... 3

Table of Contents

95-7366B

Unclip and remove the factory radio

trim panel including the a/c vents.

(Figure A)

2. Remove (4) Phillips screws

securing the radio and then

remove. (Figure B)

Continue to kit preparation

Dash Disassembly

(Figure B)

(Figure A)

1. Cut the marked area in the

dash cavity. (Figure A)

2. Remove (1) 10mm nut holding the

area previously cut in step 1 to

remove the cut-out area.

Continue to kit assembly

Kit Preparation

(Figure A)

Produkt Specifikationer

Mærke:	Metra
Kategori:	Ikke kategoriseret
Model:	95-7366B

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra 95-7366B stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Metra Manualer

Metra AXHN-2 Manual

19 August 2025

Metra PR-LOC2.4 Manual

6 Juli 2025

Metra 99-8211 Manual

1 Juli 2025

Metra 99-9303 Manual

23 Juni 2025

Metra 98-7599 Manual

19 Juni 2025

Metra 99-6537B Manual

19 Juni 2025

Metra 99-7415 Manual

19 Juni 2025

Metra 99-2002 Manual

19 Juni 2025

Metra 99-3106 Manual

19 Juni 2025

Metra 99-6525HG Manual

19 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Cres Cor H137WSUA5D Manual

20 August 2025

Moulinex Pulseo LM17GD Manual

20 August 2025

Tefal EasyGrill BG1303 Manual

20 August 2025

Tenda U2 Manual

20 August 2025

Tefal Ultraglide Plus FV5841 Manual

20 August 2025

Tefal I-Coach Touch QB950D Manual

20 August 2025

BEKO BDIN38551P Manual

20 August 2025

BEKO FSE52135DCRSN Manual

20 August 2025

Karma PRJ 5000 Manual

20 August 2025

Aqua-Vu Micro Stealth 4.3 Manual

20 August 2025