Metra 99-6525HG Manual


Læs gratis den danske manual til Metra 99-6525HG (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Metra 99-6525HG, eller vil du spørge andre brugere om produktet?

Side 1/16
METRA. The World’s best kits.
metraonline.com
© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
REV. 12/4/2015 INST99-6525
CAUTION: Metra recommends disconnecting the negative battery
terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your
local Dealership for more information. All accessories, switches,
climate controls panels, and especially air bag indicator lights
must be connected before reconnecting the battery or cycling
the ignition. Also, do not remove the factory radio with the key
in the on position, or the vehicle running. It would be best to
remove the key from the ignition and then wait a few seconds
before removing the factory radio.
Installation instructions for part 99-6525
ISO DIN radio provision with pocket
ISO DDIN radio provision
Integrated buttons and included interface for climate functions
Painted matte black (99-6525B)
or high gloss black (99-6525HG)
A) Radio trim panel with climate controls • B) Radio brackets • C) Lower support bracket • D) Pocket • E) (2) Metal panel clips
• F) (2) Plastic panel clips • G) (2) #8 x 3/8” Phillips pan-head screws • H) (2) #8 x 1/2” Phillips countersunk flat-head screws
• Climate extension cable (not shown) • Axxess interface and wiring harness (not shown)
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • Included Antenna Adapter: • 40-EU10
• Panel removal tool • Phillips screwdriver
• T-30 Torx driver
TOOLS REQUIRED
Chrysler 300 2011-2014
(with a 8” screen)
99-6525
A
DC
E
F
G H
B
Dash Disassembly ................................................. 2
Kit Assembly
ISO DIN radio provision with pocket ...................... 3
ISO DDIN radio provision ...................................... 4
Axxess interface installation ..............................5-6
Screen Operation ................................................... 7
Updating the 99-6525 ............................................ 8
Table of Contents
99-6525
2
Dash Disassembly
1. Unclip and remove the top half of
the shift knob. (Figure A)
2. Remove (1) T-30 Torx screw
securing the knob and then
remove. (Figure B)
3. Unclip and remove the panel
surrounding the shift knob.
(Figure C)
4. Unclip and remove the climate
control/radio control panel.
Note: The harness removed from
this panel will connect to the
climate extension cable.
(Figure D)
5. Remove (2) Phillips screws
securing the pocket below the
climate control panel, and then
unclip and remove the pocket.
(Figure E)
6. Remove the (4) Phillips screws
securing the radio chassis, and
then unplug and remove it from
the dash cavity. Note: The white
round cable connected to the
radio chassis will connect into
the Axxess interface to drive the
factory display screen.
Continue to kit assembly.
(Figure D)(Figure A)
(Figure C)
(Figure E)(Figure B)


Produkt Specifikationer

Mærke: Metra
Kategori: Ikke kategoriseret
Model: 99-6525HG

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra 99-6525HG stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Metra Manualer

Metra

Metra 99-2002 Manual

19 Juni 2025
Metra

Metra 99-3106 Manual

19 Juni 2025
Metra

Metra 99-6525HG Manual

19 Juni 2025
Metra

Metra 99-9225 Manual

19 Juni 2025
Metra

Metra 99-8216 Manual

3 Juni 2025
Metra

Metra 72-8110 Manual

18 Marts 2025
Metra

Metra BLK-9600 Manual

11 Marts 2025
Metra

Metra 99-7386B Manual

11 Marts 2025
Metra

Metra 82-8602 Manual

13 Januar 2025
Metra

Metra 99-8274 Manual

13 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer