Metra 99-7348B Manual

Metra Ikke kategoriseret 99-7348B

Læs gratis den danske manual til Metra 99-7348B (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Metra 99-7348B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

REV. 11/9/2015 INST99-7348B

Installation instructions for part 99-7348B

CAUTION!

Metra recommends disconnecting the negative bat

tery terminal before beginning any installation, unless the vehicle

manufacturer recommends against so. Please check with your local

Dealership for more information. All accessories, switches, climate

controls panels, and especially air bag indicator lights must be con-

nected before reconnecting the battery or cycling the ignition. Also,

do not remove the factory radio with the key in the on position, or the

vehicle running. It would be best to remove the key from the ignition

and then wait a few seconds before removing the factory radio.

• ISO DDIN radio provision

• ISO DIN radio provision with pocket

• Painted black to match factory finish

• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws

20;-,(;<9,:

20;*64765,5;:

>0905.(5;,55(*655,*;065: (sold separately)

Wiring Harness: • 70-7304

Antenna Adapter: • Not required

• Panel removal tool • Phillips screwdriver

;663:9,8<09,+

Hyundai Accent with radio delete 2012-2013

99-7348B Dash Disassembly ................................................. 2

Kit Assembly

– ISO DDIN radio provision ...................................... 3

–ISO DIN radio provision with pocket ...................... 3

Table of Contents

CBA D

99-7348B

1. Unsnap the radio bezel from the

dash and then remove. (Figure A)

2. Remove (4) Phillips screws

securing the radio delete panel,

and then remove. (Figure B)

Continue to kit assembly

Dash Disassembly

(Figure B)

(Figure A)

Kit Assembly

(Figure A)

(Figure B)

(Figure C)

ISO DDIN radio provision

1. Attach the radio brackets to the

radio trim panel. (Figure A)

2. Slide the radio into the completed

assembly, and then secure with

the screws supplied with the radio.

(Figure B)

3. Locate the factory wiring harness

and antenna connector in the

dash and complete all necessary

connections to the radio. Metra

recommends using the proper

mating adapter from Metra or

AXXESS. Reconnect the negative

battery terminal and test the radio

for proper operation.

4. Reassemble the dash in reverse

order of disassembly.

Produkt Specifikationer

Mærke:	Metra
Kategori:	Ikke kategoriseret
Model:	99-7348B

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra 99-7348B stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Metra Manualer

Metra AXHN-2 Manual

19 August 2025

Metra PR-LOC2.4 Manual

6 Juli 2025

Metra 99-8211 Manual

1 Juli 2025

Metra 99-9303 Manual

23 Juni 2025

Metra 98-7599 Manual

19 Juni 2025

Metra 99-6537B Manual

19 Juni 2025

Metra 99-7415 Manual

19 Juni 2025

Metra 99-2002 Manual

19 Juni 2025

Metra 99-3106 Manual

19 Juni 2025

Metra 99-6525HG Manual

19 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Cres Cor H137WSUA5D Manual

20 August 2025

Moulinex Pulseo LM17GD Manual

20 August 2025

Tefal EasyGrill BG1303 Manual

20 August 2025

Tenda U2 Manual

20 August 2025

Tefal Ultraglide Plus FV5841 Manual

20 August 2025

Tefal I-Coach Touch QB950D Manual

20 August 2025

BEKO BDIN38551P Manual

20 August 2025

BEKO FSE52135DCRSN Manual

20 August 2025

Karma PRJ 5000 Manual

20 August 2025

Aqua-Vu Micro Stealth 4.3 Manual

20 August 2025