Metra. The World’s Best Kits.
®MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 6/28/19 INST99-7394B
I N S TA L L AT I O N I N S T R U C T I O N S
99-7394B
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
• ISO DIN radio provision
• ISO DDIN radio provision †
• Pioneer modular DDIN radio provision †
• Painted matte black
KIT COMPONENTS
• A) Radio housing (front) • B) Radio housing (rear) • C) Radio brackets • D) Pioneer adapter brackets • E) Blank panel
• F) #4 x 3/8” Phillips screws (5) • G) #8 x 1/2” Phillips screws (4) • H) Panel clips (3) • I) Panel clips (4) TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ................................................... 2
Kit Assembly
- ISO DIN radio provision .........................................3
- ISO DIN radio provision ........................................4
- Pioneer modular DDIN radio provision .............. 5
WIRING & ANTENNA CONNECTION
(sold separately)
Wire harness: • 70-7306
Antenna adapter: • 40-KI11
Steering wheel control interface: • ASWC-1
12v-to-6v camera step-down: • AX-CAM6V
A B C D E
F H IG
Kia Forte 2019-up
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
† This kit can only be used with an ISO DDIN radio with an “L” shaped chassis design,
with the radio chassis at the bottom of the screen. As of this writing, only the Alpine
INE-W967HD (discontinued, replaced by INE-W977HD), iLX-107, and iLX-207 have this
design. Also, The Pioneer modular radios, DMH-C2550NEX and DMH-C2500NEX, can be
used with the included adapter brackets