Metra 99-7427B Manual


Læs gratis den danske manual til Metra 99-7427B (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Metra 99-7427B, eller vil du spørge andre brugere om produktet?

Side 1/4
METRA. The World’s best kits.metraonline.com © COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
REV. 7/16/2015 INST99-7427
Installation instructions for part 99-7427
CAUTION!
Metra recommends disconnecting the negative bat
-
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con
-
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
DIN Radio Provision With Pocket
ISO DIN Radio Provision With Pocket
PAINTED TO MATCH FACTORY DASH:
99-7427B=BLACK, 99-7427G=GRAY
Textured To Match Factory Dash
A) Radio Housing • B) Trim Plate • C) ISO Brackets • D) Module Brackets • E) (2) Phillips Head Screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7552
Antenna Adapter: • 40-NI12
Torx Screwdriver • Panel Removal Tool • Phillips Screwdriver
TOOLS REQUIRED
(non nav models) (w/o tech package)
A B C D E
Dash Disassembly ................................................. 2
Kit Preparation ....................................................... 2
Kit Assembly
DIN Radio Provision With Pocket 3 ...........................
ISO DIN Radio Provision With Pocket 3 ....................
Table of Contents
99-7427
1. Unclip and remove the panel above
the radio including the a/c vents and
the climate controls. Unplug and
remove the panel. (Figure A)
2. Unclip and remove the panel below
the radio. (Figure B)
3. Remove (6) Phillips screws securing
the radio. Unplug and remove the
radio. (Figure C)
4.
Remove (4) Torx head screws securing
each side bracket to the factory radio.
Remove (1) Torx head screw from each
side of the module below the radio,
and then remove the radio and module.
Retain the module and (2) screws for
re-use during kit assembly. (Figure D)
Continue to kit preparation
Dash Disassembly Kit Preparation
(Figure C)
1. Attach the module brackets to the
radio housing using (2) Phillips head
screws supplied. (Figure A)
2. Secure the module to the completed
assembly using (2) factory Torx
head screws removed from dash
disassembly. (Figure B)
Continue to kit assembly
X
O FF
PASS
AIR
BAG
CD C HANGER
AUX IN
(Figure B)
(Figure A) (Figure D)
(Figure A)
(Figure B)


Produkt Specifikationer

Mærke: Metra
Kategori: Ikke kategoriseret
Model: 99-7427B

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra 99-7427B stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Metra Manualer

Metra

Metra AXHN-2 Manual

19 August 2025
Metra

Metra 99-8211 Manual

1 Juli 2025
Metra

Metra 99-9303 Manual

23 Juni 2025
Metra

Metra 98-7599 Manual

19 Juni 2025
Metra

Metra 99-6537B Manual

19 Juni 2025
Metra

Metra 99-7415 Manual

19 Juni 2025
Metra

Metra 99-2002 Manual

19 Juni 2025
Metra

Metra 99-3106 Manual

19 Juni 2025
Metra

Metra 99-6525HG Manual

19 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer