Metra 99-8210 Manual


Læs gratis den danske manual til Metra 99-8210 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Metra 99-8210, eller vil du spørge andre brugere om produktet?

Side 1/5
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV.7/2/21 INST99-8210
I N S TA L L AT I O N I N S T R U C T I O N S
99-8210
Attention: With the key out of the
ignition, disconnect the negative battery
terminal before installing this product.
Ensure that all installation connections are
secure before cycling the ignition to test
this product.
KIT FEATURES
DIN radio provision with pocket
ISO DIN radio provision with pocket
KIT COMPONENTS
• A) Radio housing • B) ISO brackets • C) ISO trim plate
TOOLS REQUIRED
• Panel removal tool
• Phillips screwdriver
• 10mm socket removal tool
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
–DIN radio provision with pocket ........................3
–ISO DIN radio provision with pocket ..................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: • 70-1761 • TYTO-01
Antenna Adapter: Not required
A B C
Toyota 4-Runner Limited 2003-2009*
*For non-navigation models
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
1. Unsnap and remove trim from around
shifter. (Figure A)
2. Unsnap and remove center console
cover. (Figure B)
3. Unsnap trim ring from around ignition
key cylinder.
4. Remove (1) 10 mm bolt from bottom
right side of panel below steering
column. Unsnap panel and pull away to
gain access behind panel. (Figure C)
5. Remove (1) 10 mm bolt on bottom left
of center panel behind panel below
steering column. (Figure D)
6. Remove (1) 10 mm bolt beneath climate
control behind pocket door.(Figure E)
Unsnap climate control, unplug and
remove climate control. (Figure F)
7. Remove (2) 10 mm bolts beneath radio
behind climate controls. (Figure G)
8. Unsnap and remove entire center panel
around radio.
9. Remove (2) 10 mm bolts securing radio.
Unplug and remove radio. (Figure H)
Continue to Kit Assembly
(Figure B) (Figure F)
(Figure A) (Figure E)
DASH DISASSEMBLY
(Figure D)
(Figure C)
PASSENGER
(Figure G)
(Figure H)
DETAIL
DETAIL


Produkt Specifikationer

Mærke: Metra
Kategori: Ikke kategoriseret
Model: 99-8210

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra 99-8210 stil et spørgsmål nedenfor, og andre brugere vil svare dig