Metra 99-9008 Manual

Metra Ikke kategoriseret 99-9008

Læs gratis den danske manual til Metra 99-9008 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Metra 99-9008, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

REV. 1/25/2016 INST99-9008

Installation instructions for part 99-9008

CAUTION!

Metra recommends disconnecting the negative bat

tery terminal before beginning any installation, unless the vehicle

manufacturer recommends against so. Please check with your local

Dealership for more information. All accessories, switches, climate

controls panels, and especially air bag indicator lights must be con-

nected before reconnecting the battery or cycling the ignition. Also,

do not remove the factory radio with the key in the on position, or the

vehicle running. It would be best to remove the key from the ignition

and then wait a few seconds before removing the factory radio.

• ISO DIN radio provision

• DIN radio provision

Aftermarket radios are equipped with a trim ring surrounding the face of

the radio. Since some installers prefer the trim ring equipped with the radio

(DIN) and others do not (ISO DIN), this kit was designed to allow the installer

to choose.

• A) ISO DIN housing • B) ISO DIN trim plate • C) ISO DIN brackets • D) DIN trim plate

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-1784

Antenna Adapter: • 40-VW54

• 86-9001 radio removal keys • Torx T-10 driver

TOOLS REQUIRED

Volkswagen Beetle 1998-2010

99-9008

A B C

Dash Disassembly ................................................. 2

Kit Assembly

– ISO DIN radio provision......................................... 3

– DIN radio provision............................................ 4

Table of Contents

99-9008

1. Insert the long end of the 86-9001

radio removal tool into the slots in

the factory radio (flat sides pointing

out), and then pull the radio out.

Disconnect all connectors and then

remove the radio. (Figure A)

2. For ISO DIN radio installations only,

remove (2) Torx T-10 screws exposed

in the radio cavity. (Figure A)

Continue to kit assembly

Dash Disassembly

(Figure A)

Produkt Specifikationer

Mærke:	Metra
Kategori:	Ikke kategoriseret
Model:	99-9008

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra 99-9008 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Metra Manualer

Metra AXHN-2 Manual

19 August 2025

Metra PR-LOC2.4 Manual

6 Juli 2025

Metra 99-8211 Manual

1 Juli 2025

Metra 99-9303 Manual

23 Juni 2025

Metra 98-7599 Manual

19 Juni 2025

Metra 99-6537B Manual

19 Juni 2025

Metra 99-7415 Manual

19 Juni 2025

Metra 99-2002 Manual

19 Juni 2025

Metra 99-3106 Manual

19 Juni 2025

Metra 99-6525HG Manual

19 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Cres Cor H137WSUA5D Manual

20 August 2025

Moulinex Pulseo LM17GD Manual

20 August 2025

Tefal EasyGrill BG1303 Manual

20 August 2025

Tenda U2 Manual

20 August 2025

Tefal Ultraglide Plus FV5841 Manual

20 August 2025

Tefal I-Coach Touch QB950D Manual

20 August 2025

BEKO BDIN38551P Manual

20 August 2025

BEKO FSE52135DCRSN Manual

20 August 2025

Karma PRJ 5000 Manual

20 August 2025

Aqua-Vu Micro Stealth 4.3 Manual

20 August 2025