Metra PR-LOC2.4 Manual


Læs gratis den danske manual til Metra PR-LOC2.4 (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Metra PR-LOC2.4, eller vil du spørge andre brugere om produktet?

Side 1/12
PR-LOC2.2 & PR-LOC2.4
I N S TA L L AT I O N I N S T R U C T I O N S
MetraOnline .com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 9/12/22 INSTPR-LOC2.2 & PR-LOC2.4
TABLE OF CONTENTS
Quick Start Guide
Things to Know .................................................2
Connections .......................................................2
Gain setup
Basic setup.........................................................3
Quick Reference: PR-LOC2.2 ..................................5
Diagram: PR-LOC2.4 ...............................................8
Specifications .........................................................9
Universal Premium LOCs
PR-LOC2.2 2 IN - 2 OUT with Max Input 20v
PR-LOC2.4 2 IN - 4 OUT With Max Input 20v
TOOLS RECOMMENDED
• Digital Multi-meter
• Test Tones
Universal Premium LOCs
The Proscenium PR-LOC2.2 & PR-LOC2.4 can be used to add amplifiers to an audio system that does not have RCA outputs or when replacing
an OEM radio and retaining the factory amplified system. Variable Gain Controls with Clipping Indicators, Selectable Ground Isolation Load and
Select features ensure a pure, noise-free signal for any type of audio system.
PR-LOC2.4
Line Out Converter (LOC)
KIT COMPONENTS
PR-LOC2.2
Line Out Converter (LOC)
2
THINGS TO KNOW
1. This is an active LOC and MUST have constant 12 volt and a good ground to operate properly.
Having a poor ground can induce noise into your system, use the same gauge wire as the
12 volt line.
2. Determine a suitable mounting location. Make sure you can access all controls and
connections.
3. When ready to mount your LOC check under your selected mounting location to make sure
it is clear of any wiring harnesses, fuel or brake lines or anything else that may affect the
vehicle safety.
QUICK START GUIDE
CONNECTIONS
1. Connect your 12 volt and ground wires to the terminals. 14-16 gauge wire is recommended.
2. By default the LOCs Turn On Mode DC Offset is set to . Other turn on options are available and
described in the Turn On Signal Feature Breakdown portion of this manual.
3.
Connecting your can happen in a few different places based on your Speaker Input
factory system.
If your vehicle doesn’t have an OE amplifier your best option is to use the speaker wires a.
located behind the radio. Your LOC only requires two inputs, we recommend a left
and right full range signal.
If your vehicle has an OE amplifier your best option is to use the speaker wires on b.
the output side of your factory amplifier, look for a full range signal.
4. Connect your RCAs. RCA’s are for the right channel. Red Black, Gray, or White are for the
left channels. An explanation of the RCAs and are described in the Main Output Bass Output
Feature Breakdown portion of this manual.


Produkt Specifikationer

Mærke: Metra
Kategori: Ikke kategoriseret
Model: PR-LOC2.4

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra PR-LOC2.4 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Metra Manualer

Metra

Metra 99-8211 Manual

1 Juli 2025
Metra

Metra 99-9303 Manual

23 Juni 2025
Metra

Metra 98-7599 Manual

19 Juni 2025
Metra

Metra 99-6537B Manual

19 Juni 2025
Metra

Metra 99-7415 Manual

19 Juni 2025
Metra

Metra 99-2002 Manual

19 Juni 2025
Metra

Metra 99-3106 Manual

19 Juni 2025
Metra

Metra 99-6525HG Manual

19 Juni 2025
Metra

Metra 99-9225 Manual

19 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer