2
WARNING, risk of DANGER ! The operator should refer to this user's manual whenever this danger symbol appears.
The instrument should been operating continuously for more than 30 minutes within specied operating temperature
range (18°C ~ 28°C).
WARNING! Risk of electric shock. The voltage on the parts marked with this symbol may be dangerous.
Earth.
Chassis ground
The CE marking indicates compliance with the European Low Voltage Directive (2014/35/EU), Electromagnetic
Compatibility Directive (2014/30/EU), and Restriction of Hazardous Substances Directive (RoHS, 2011/65/EU and
2015/863/EU).
The UKCA marking certies that the product is compliant with the requirements that apply in the United Kingdom,
in particular as regards Low-Voltage Safety, Electromagnetic Compatibility, and the Restriction of Hazardous
Substances.
The rubbish bin with a line through it indicates that, in the European Union, the product must undergo selective
disposal in compliance with Directive WEEE 2012/19/EU. This equipment must not be treated as household waste.
Denitions of the measurement categories
Measurement category IV corresponds to measurements taken at the source of low-voltage installations.
Example: power feeders, meters and protection devices.
Measurement category III corresponds to measurements on building installations.
Example: distribution panel, circuit-breakers, machines or xed industrial devices.
Measurement category II corresponds to measurements taken on circuits directly connected to low-voltage installations.
Example: power supply to domestic electrical appliances and portable tools.
Denitions of overvoltage categories
Overvoltage category IV concerns equipment installed where the power supply enters a building, or nearby, between the point
of entry and the main distribution frame. This equipment can include electricity meters and primary overvoltage protection
devices.
Overvoltage category III concerns equipment that is part of the electrical installation of a building. This equipment includes
sockets, fuse panels, and some network installation control devices.
Overvoltage category II concerns equipment designed to be supplied from the electrical installation of the building. It includes
both equipment connected by plugs and equipment connected permanently.
Thank you for purchasing a GX 1030 Function/Arbitrary Waveform Generator.
For best results from your device:
read this user's manual carefully,
comply with the precautions for use.
