Microchip PIC24FJ128GU408 Manual
Microchip
Ikke kategoriseret
PIC24FJ128GU408
Læs gratis den danske manual til Microchip PIC24FJ128GU408 (68 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Microchip PIC24FJ128GU408, eller vil du spørge andre brugere om produktet?
Side 1/68
2013-2019 Microchip Technology Inc. DS30003035B-page 1
HIGHLIGHTS
This section of the manual contains the following major topics:
1.0 Introduction ...................................................................................................................... 2
2.0 Registers.......................................................................................................................... 3
3.0 Register Map.................................................................................................................... 4
4.0 Time Base Generator..................................................................................................... 17
8.0 Module Sync Outputs..................................................................................................... 57
9.0 Sync and Triggered Operation ....................................................................................... 58
5.0 Timer Modes .................................................................................................................. 18
10.0 Operation During Sleep and Idle Modes........................................................................ 64
10.0 Operation During Sleep and Idle Modes........................................................................ 64
10.0 Operation During Sleep and Idle Modes........................................................................ 64
11.0 Effects of a Reset........................................................................................................... 64
12.0 Related Application Notes.............................................................................................. 65
13.0 Revision History ............................................................................................................. 66
Capture/Compare/PWM/Timer (MCCP and SCCP)
dsPIC33/PIC24 Family Reference Manual
DS30003035B-page 2 2013-2019 Microchip Technology Inc.
1.0 INTRODUCTION
Select dsPIC33/PIC24 family devices include one or more Capture/Compare/PWM/Timer (CCP)
modules. These modules are similar to the multipurpose timer modules found on many other
16-bit microcontrollers. They also provide the functionality of the comparable Input Capture, Output
Compare and General Purpose Timer peripherals found in all other devices.
CCP modules can operate in one of three major modes:
• General Purpose Timer
• Input Capture
• Output Compare/PWM
There are two different forms of the module, distinguished by the number of PWM outputs that
the module can generate. Single output modules (SCCPs) provide only one PWM output.
Multiple output modules (MCCPs) can provide up to six outputs and an extended range of output
control features, depending on the pin count of the particular device.
All modules (SCCP and MCCP) include these features.
• User-Selectable Clock Inputs, Including System Clock and External Clock Input Pins
• Input Clock Prescaler for Time Base
• Output Postscaler for Module Interrupt Events or Triggers
• Synchronization Output Signal for Coordinating Other MCCP/SCCP Modules
with User-Configurable Alternate and Auxiliary Source Options
• Fully Asynchronous Operation in All Modes and in Low-Power Operation
• Special Output Trigger for A/D Conversions
• 16-Bit and 32-Bit General Purpose Timer Modes with Optional Gated Operation for Simple
Time Measurements
• Capture Modes:
- Backward compatible with previous Input Capture peripherals of the dsPIC33/PIC24 families
- 16-bit or 32-bit capture of time base on external event
- Up to four-level deep FIFO capture buffer
- Capture source input multiplexer
- Gated capture operation to reduce noise-induced false captures
• Output Compare/PWM Modes:
- Backward compatible with previous Output Compare peripherals of the dsPIC33/PIC24 families
- Single Edge and Dual Edge Compare modes
- Center-Aligned Compare mode
- Variable Frequency Pulse mode
- External Input mode
MCCP modules also include these extended PWM features:
• Single Output Steerable mode
• Brush DC Motor (Forward and Reverse) Modes
• Half-Bridge with Dead-Time Delay
• Push-Pull PWM Mode
• Output Scan Mode
• Auto-Shutdown with Programmable Source and Shutdown State
• Programmable Output Polarity
Note: This family reference manual section is meant to serve as a complement to device
data sheets. Depending on the device variant, this manual section may not apply to
all dsPIC33/PIC24 devices.
Please consult the note at the beginning of the “Capture/Compare/PWM/Timer
Modules (SCCP/MCCP)” chapter in the current device data sheet to check
whether this document supports the device you are using.
Device data sheets and family reference manual sections are available for
download from the Microchip Worldwide Website at: http://www.microchip.com
Produkt Specifikationer
| Mærke: | Microchip |
| Kategori: | Ikke kategoriseret |
| Model: | PIC24FJ128GU408 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Microchip PIC24FJ128GU408 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Microchip Manualer
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
Ikke kategoriseret Manualer
- TFA Dostmann
- Jonsered
- Quantum
- BlueDri
- AJA
- Barazza
- Xoro
- Charge Amps
- TacTic
- Tracer
- Senco
- Viltrox
- AcuRite
- Joie
- Born Free
Nyeste Ikke kategoriseret Manualer
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025