Middle Atlantic C3-24-LD2U Manual

Middle Atlantic Ikke kategoriseret C3-24-LD2U

Læs gratis den danske manual til Middle Atlantic C3-24-LD2U (14 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Middle Atlantic C3-24-LD2U, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/14

Thank you for purchasing a C3 Series Display Mount option. Please read these instructions

thoroughly before installing or assembling this product.

THANK YOU

NOTE: A 1-Bay C3 credenza with a display mount option (C3-XX-LDXU)

configured for a single displays (display not included) shown.

100-00034 Rev C

IMPORTANT SAFETY INSTRUCTIONS - EN

DANGER HAZARDOUS VOLTAGE: equilateral triangle is intended to alert the user to the The lightning flash with the arrowhead symbol, within an

presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to

persons.

WARNING: A warning alerts you to a situation that could result in serious personal injury or death.

CAUTION: A caution alerts you to a situation that may result in minor personal injury or damage to the product and/or property.

NOTE: A note is used to highlight procedures pertaining to the installation, operation, or maintenance of the product.

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Clean only with dry cloth.

• Only use attachments/accessories specified by the manufacturer.

WARNING: F e to , t d d f w the f g f t n n t in s l , e to the ailur read unders an an ollo ollowin in orma io ca resul seriou persona injury damag

equipmen oidin warran re pon ibili aller en urt or v g of the ty. It is the s s ty of the Inst /User to s e that this product is loaded according to

specifications.

WARNING: Exceeding the weight ratings listed can result in serious injury or damage to the equipment. It is the responsibility of the

Installer/User to ensure the components installed do not surpass the weight ratings as an unstable condition can occur which may

cause possible injury or damage.

CAUTION: Note that during construction, there must be no possibility of personal injury, for example the squeezing of fingers or

arms.

CAUTION: If there is visible damage on the product, it must not be installed.

CAUTION: Safety measures must be practiced at all times during the assembly of this product. Use proper safety equipment and

tools for the assembly procedure to prevent personal injury.

CAUTION: For loading, always put heavier items at the bottom of the bays, not near the top, in order to help prevent the possibility

of the furnishing tipping over.

CAUTION: The appliance is not intended for use by young children or infirm persons without supervision.

Safety Instructions: Rack Mount

Elevated Operating Ambient: If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack

environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment

compatible with the maximum ambient temperature (Tma) specified by the manufacturer.

Reduced Air Flow: Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the

equipment is not compromised.

Mechanical Loading: Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven

mechanical loading.

Circuit Overloading: Consideration should be given to the connection of the equipment to the supply circuit and the effect that

overloading of the circuit might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate

ratings should be used when addressing this concern.

Reliable Earthing: Reliable earthing of rack-mounting equipment should be maintained. Particular attention should be given to supply

connections other than direct connections to the branch circuit (e.g. use of power strips).

Disconnect Device (Pluggable Equipment): The socket-outlet shall be installed near the equipment and shall be easily accessible.

WARNING: -Middle Atlantic Products, electrical systems conform to and should be properly grounded in compliance with require

ments of the current National Electrical Code or codes administered by local authorities. All electrical products may present a possible

shock or fire hazard if improperly installed or used. Electrical products may bear the mark of a Nationally Recognized Testing

Laboratory (NRTL) and should be installed in conformance with current local and/or the National Electrical Code.

Page 2

Produkt Specifikationer

Mærke:	Middle Atlantic
Kategori:	Ikke kategoriseret
Model:	C3-24-LD2U

Har du brug for hjælp?

Hvis du har brug for hjælp til Middle Atlantic C3-24-LD2U stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Middle Atlantic Manualer

Middle Atlantic SNE30F-4242 Manual

6 Juni 2025

Middle Atlantic SNE27F-4536 Manual

6 Juni 2025

Middle Atlantic SNE24F-CN-4248 Manual

6 Juni 2025

Middle Atlantic SNE30F-4236 Manual

6 Juni 2025

Middle Atlantic SNE30F-4548 Manual

6 Juni 2025

Middle Atlantic SNE24F-4236 Manual

6 Juni 2025

Middle Atlantic SNE30F-4536 Manual

4 Juni 2025

Middle Atlantic C3-32-LD2U Manual

2 April 2025

Middle Atlantic C3-24-LD2U Manual

1 April 2025

Middle Atlantic IRCS-4224 Manual

20 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vulcan 1048C Manual

16 Juni 2025

Playtive IAN 91495 Manual

16 Juni 2025

Playtive IAN 270612 Manual

16 Juni 2025

Playtive IAN 315026 Manual

16 Juni 2025

Playtive IAN 115585 Manual

16 Juni 2025

Playtive 10464 Manual

16 Juni 2025

Playtive HG03821 Manual

16 Juni 2025

Martin VC-Strip Manual

16 Juni 2025

Playtive HG06316 Manual

16 Juni 2025

Playtive HG05102 Manual

16 Juni 2025