Midland MicroMobile MXAT04 Manual

Midland Radio MicroMobile MXAT04

Læs gratis den danske manual til Midland MicroMobile MXAT04 (1 sider) i kategorien Radio. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om Midland MicroMobile MXAT04, eller vil du spørge andre brugere om produktet?

Side 1/1
5900 Parretta Drive ● KANSAS CITY, MO ● 64120
PHONE: (816) 241-8500 ● FAX: (816) 241-5713
EMAIL: mail@midlandradio.com
WEBSITE: midlandusa.com
Midland Radio Corporation
midlandusa.com
4/26/2023
MXAT04 and MXAT05 Assembly Diagram
1. The MXAT04 and MXAT05 are designed for mounng brackets or surfaces up to 3/4" thick. substanal
2. The MXAT04 and MXAT05 are designed to be installed in a 1/2" hole.
3. Part B, 3/8” spacer, is oponal for mounng brackets or surfaces up to 3/8” thick. Part B, 3/8” spacer,
should be removed for brackets or surfaces more than 3/8” thick.
4. Remove the FME to PL259 adapter on the end of the coaxial cable so the washers and hex nut can be slid
o the coaxial cable. Also remove the 3/8” spacer, Part B, if not being used.
5. Route the coaxial cable from the topside through the mounng hole in the bracket or surface, Part C.
6. Slide the at washer, lock washer and hex nut, Parts D, E and F, back on the coaxial cable in the order
shown.
7. Hold the antenna assembly in posion while ghtening the hex nut, Part F. Maximum torque 35 lb-.
8. Finish roung the coaxial cable through the vehicle to the radio, before reinstalling the FME to PL259
adapter.


Produkt Specifikationer

Mærke: Midland
Kategori: Radio
Model: MicroMobile MXAT04

Har du brug for hjælp?

Hvis du har brug for hjælp til Midland MicroMobile MXAT04 stil et spørgsmål nedenfor, og andre brugere vil svare dig