Mikrotik R11E-LTE6 Manual


Læs gratis den danske manual til Mikrotik R11E-LTE6 (3 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Mikrotik R11E-LTE6, eller vil du spørge andre brugere om produktet?

Side 1/3
R11e series
R11e series
R11e series
R11e seriesR11e series
R11e-LTE-US is a Cat-4 modem. It can be integrated into any MikroTikproduct that has a miniPCI-e slot.
R11e-LTE-US
R11e-LTE
R11e-4G
R11e-LTE6
Specifications
Interface – Mini-PCIe;
Temperature Operating-30°C .. +70°C
LTE Channel Bandwidth:1.4/3/5/10/15/20 MHz
LTE Category:4 (150Mbps Downlink, 50Mbps Uplink)
3G Category: R7 (Cat14 - 21.1Mbps Downlink)
LTE (FDD) bands:2/4/5/12 (1900/1700/850/700)
3G bands:2/5 (1900/850)
Installing the module in your device
R11e-TE-US for professional use. Each of the cards comes in ESD protective packaging. When handling electrical equipment please observe the following
safety precautions:
Use a wrist grounding strap when unpacking and working with electrical components to avoid electrical discharge (ESD) damage;
After unpacking please place the card on the anti-static mat;
When installing make sure there are no objects that can damage or touch the PCB plate;
The card can be installed in your desired device using the factory provided screw holes in a PCB plate;
Locate miniPCIe slot on your device;
Unscrew two factory attached screws;
Optionally you can use the thermal pad by placing it under the card, the thermal pad is not included in the package;
Install the module to the miniPCIe slot and secure it with previously removed screws. Tightening torque 0,3 Nm;
Attach antenna cables to the connectors on the module:
Configuration
The device will be automatically recognized when used in a MikroTik RouterOS powered device. Configuration can be set in the “Wireless” menu. More
information about the configuration of LTE can be found in our documentation: https://wiki.mikrotik.com/wiki/Manual:Interface/LTE
The device is tested with RouterOS v6 and above. It might be compatible with other operating systems, but drivers are not included with the card.
Operating system support
The module supports RouterOS software version v6.46. Other operating systems have not been tested.
Federal Communication Commission Interference Statement
FCC ID: TV7R11ELTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter.
IMPORTANT: Exposure to Radio Frequency Radiation.
0,29m minimum distance has to be maintained between the antenna and the occupational user and 0,64m to the general public. Under such configuration,
the FCC radiation exposure limits set forth for a population/uncontrolled environment can be satisfied.
When installing outdoors please ensure that the device case is waterproof and is designed for outdoor use.
Mounting and configuration of this device should be done by a qualified person.


Produkt Specifikationer

Mærke: Mikrotik
Kategori: Netværkskort/adapter
Model: R11E-LTE6
Bredde: 30 mm
Dybde: 5 mm
Højde: 51 mm
Produktfarve: Green, Stainless steel
Generering af mobilnetværk: 3G, 4G
Strømforbrug (typisk): 5 W
Driftstemperatur (T-T): -30 - 70 °C
Forbindelsesteknologi: Ledningsført
Understøttede netværksprotokoller: IPv4, IPv6
Harmoniseret systemkode (HS): 85176990
Kompatible operativsystemer: RouterOS
Værtsgrænseflade: Mini PCI Express
Grænseflade: WWAN
Intern: Ja
Maksimal dataoverførselshastighed: 300 Mbit/s
4G standard: LTE-TDD & LTE-FDD
Understøttelse af 3G-bånd: 850,900,1900,2100 Mhz
Understøttelse af 4G-bånd: 700,800,850,900,1800,1900,2100,2600 Mhz
Komponent til: PC
Antennestik type: U.FL

Har du brug for hjælp?

Hvis du har brug for hjælp til Mikrotik R11E-LTE6 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Netværkskort/adapter Mikrotik Manualer

Netværkskort/adapter Manualer

Nyeste Netværkskort/adapter Manualer

Savio

Savio AK-79 Manual

19 Juni 2025
Cudy

Cudy PE10G Manual

10 Juni 2025
Cudy

Cudy BE6500 Manual

6 Juni 2025
Cudy

Cudy WU5400 Manual

3 Juni 2025
Cudy

Cudy BU530 Manual

3 Juni 2025
EXSYS

EXSYS EX-12006 Manual

2 Juni 2025
EXSYS

EXSYS EX-6162 Manual

1 Juni 2025
EXSYS

EXSYS EX-60114 Manual

1 Juni 2025
EXSYS

EXSYS EX-60115 Manual

1 Juni 2025