Milesight MS-N7032UPH Manual

Milesight Videooptager MS-N7032UPH

Læs gratis den danske manual til Milesight MS-N7032UPH (116 sider) i kategorien Videooptager. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Milesight MS-N7032UPH, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/116

Network Video Recorder

User Manual

V3.06

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to

avoid danger or property loss. The precaution measures are divided into “Warnings”

and “Cautions”

Warnings: Serious injury or death may be caused if any of these warnings is

neglected.

Cautions: Injury or equipment damage may be caused if any of these cautions are

neglected.

Warnings: Please follow these safeguards to

prevent injury or death.

Cautions: Please follow these safeguards to

prevent potential injury or material damage.

Warnings



This installation must be conducted by a qualified service person and should

strictly comply with the electrical safety regulations of the local region



To avoid risk of fire and electric shock, do keep the product away from rain

and moisture



Do not touch components such as heat sinks, power regulators, and

processors, which may be hot



Source with DC 12V or PoE



Please make sure the plug is firmly inserted into the power socket



When the product is installed on a wall or ceiling, the device should be firmly

fixed



If the product does not work properly, please contact your dealer. Never

attempt to disassemble the camera by yourself

Cautions



Make sure that the power supply voltage is correct before using the camera



Do not store or install the device in extremely hot or cold temperatures,

dusty or damp locations, and do not expose it to high electromagnetic

radiation



Only use components and parts recommended by manufacturer



Do not drop the camera or subject it to physical shock



To prevent heat accumulation, do not block air circulation around the

camera



Laser beams may damage image sensors. The surface of image sensors

Produkt Specifikationer

Mærke:	Milesight
Kategori:	Videooptager
Model:	MS-N7032UPH
Tænd-/slukkontakt:	Ja
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	440 mm
Dybde:	320 mm
Højde:	66.8 mm
Vægt:	5000 g
Produktfarve:	Sort
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Ethernet LAN-porte (RJ-45):	17
Antal USB 2.0-porte:	2
Antal USB 3.2 Gen 1 (3.1 Gen 1) type-A-porte:	1
Understøttede videoformater:	H.264, H.265
Understøttede lydformater:	G.711
Strømforbrug (typisk):	15 W
Driftstemperatur (T-T):	-10 - 55 °C
Maksimal opløsning:	3840 x 2160 pixel
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Understøttede netværksprotokoller:	IPv4, HTTP, NTP, SMTP, PPPoE, DDNS
LED-indikatorer:	Ja
HDD kapacitet:	0 GB
Optagelsestilstande:	Event, Manual, Schedule
Opløsning ved indfangningshastighed:	1280x720@30fps, 1920x1080@30fps
Maksimum billedhastighed:	30 fps
Strøm over Ethernet (PoE):	Ja
HDD-grænseflade:	SATA
Stativ-montering:	Ja
Audio RCA-indgange:	1
Audio RCA udgange:	1
PTZ-kontrol:	Ja
HDD-størrelse:	3.5 "
RS-232 grænseflade:	Ja
Understøtter RAID:	Ja
Maksimal lagerkapacitet:	40 TB
RS-485-porte:	1
Antal understøttede HHD'er:	4
Rackkapacitet:	1.5U
RAID-niveauer:	0, 1,5, 10
Video indgangskanaler:	32 kanaler
HDMI udgang:	Ja
Samlet installeret lagerkapacitet:	0 GB
Snapshot:	Ja
VGA (D-Sub) udgangsporte:	1
PTZ-tilstande:	Digital PTZ, Preset point, Preset sequence
Gennemløbs datahastighed:	320 Mbit/s
Alarm indgangskanaler:	16
Alarm udgangskanaler:	4