Milwaukee 2360-20 Manual


Læs gratis den danske manual til Milwaukee 2360-20 (12 sider) i kategorien Lommelygte. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Milwaukee 2360-20, eller vil du spørge andre brugere om produktet?

Side 1/12
Cat. No. / No de cat.
2360-20
M18 LED HP FLOOD LIGHT
ÉCLAIRAGE PAR PROJECTION HP À DEL M18™
REFLECTOR LED HP M18™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in electric
shock, re and/or serious injury. Save all warnings
and instructions for future reference.
WORK AREA SAFETY
To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
Store idle light out of reach of children. Warm
lights can become hazardous in the hands of chil-
dren.
Do not use outdoors.
ELECTRICAL SAFETY
Power cord plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Do not expose light to rain or wet conditions.
Water entering a light will increase the risk of electric
shock.
To reduce the risk of electric shock, do not put light
in water or other liquid. Do not place or store appli-
ance where it can fall or be pulled into a tub or sink.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
Do not unplug by pulling on the cord. To unplug,
grasp the plug, not the cord.
Unplug the cord from outlet when not in use and
before servicing or cleaning.
Always use a suitable extension cord to reduce
the risk of electric shock.
If operating a light in a damp location is unavoid-
able, use a ground fault circuit interrupter (GFCI)
protected supply. Use of an GFCI reduces the risk
of electric shock.
PERSONAL SAFETY
Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
light in unexpected situations.
Do not use on a ladder or unstable support.
Stable footing on a solid surface enables better
control of the light in unexpected situations.
Do no stare at the operating light source.
BATTERY TOOL USE AND CARE
Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
Use light only with specically designated bat-
tery packs. Use of any other battery packs may
create a risk of injury and re.
When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, ush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specied in the instructions.
Charging improperly or at temperatures outside
the specied range may damage the battery and
increase the risk of re.
SERVICE
Have your light serviced by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the light is main-
tained.
Never service damaged battery packs. Service
of battery packs should only be performed by
the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES
Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
WARNING
Some dust created by power
sanding, sawing, grinding, drilling,
and other construction activities contains
chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of
these chemicals are:
lead from lead-based paint
crystalline silica from bricks and cement and other
masonry products, and
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
Alternating Current
Double Insulated
Do not stare at the operating light
source
C US
UL Listing for Canada and U.S.


Produkt Specifikationer

Mærke: Milwaukee
Kategori: Lommelygte
Model: 2360-20

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee 2360-20 stil et spørgsmål nedenfor, og andre brugere vil svare dig