Milwaukee M12 3622-21 Manual

Milwaukee Laser pointer M12 3622-21

Læs gratis den danske manual til Milwaukee M12 3622-21 (20 sider) i kategorien Laser pointer. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Milwaukee M12 3622-21, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

Cat. No. / No de cat.

3622-20

M12™ CROSS LINE & PLUMB POINTS LASER

LASER À LIGNE TRANSVERSALE ET POINTS D’APLOMB M12™

LÁSER DE PUNTOS TRANSVERSALES Y DE PLOMADA M12™

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING

Read and understand all instruc-

tions. Failure to follow all instructions

listed below, may result in electric shock, re and/or

serious personal injury. Save all warnings and in-

structions for future reference.

• Save these instructions - This operator's manual

contains important safety and operating instructions.

LASER SAFETY

WARNING

The device produces visible laser

beams, which are emitted from the

tool.

• This device complies with 21 CFR 1040.10 and

1040.11 except for conformance with IEC 60825-1

Ed. 3., as described in Laser Notice No. 56, dated

May 8, 2019.

•Laser light - Do not stare into beam or view di-

rectly with optical instruments. Do not point laser

light at others. Laser light can cause eye damage.

WORK AREA SAFETY

• Ensure adequate safeguards at the work site

(e.g. surveying site when measuring on roads,

construction sites, etc.).

• Avoid dangerous environments. Avoid extended

exposure to rain, snow, damp or wet locations. Do

not use in the presence of explosive atmospheres

(gaseous fumes, dust or ammable materials).

PERSONAL SAFETY

• Do not allow persons unfamiliar with the tool,

these safety instructions, and the tool's opera-

tor's manual to operate the tool. This tool can be

dangerous in the hands of untrained users.

• Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used

with another battery pack.

• Use power tools only with specically designated

battery packs. Use of any other battery packs may

create a risk of injury and re.

• When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal

to another. Shorting the battery terminals together

may cause burns or a re.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact ac-

cidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

• Do not use a battery pack or tool that is dam-

aged or modied. Damaged or modied batteries

may exhibit unpredictable behavior resulting in re,

explosion or risk of injury.

• Do not expose a battery pack or tool to re or

excessive temperature. Exposure to re or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specied in the instructions. Charging

improperly or at temperatures outside the specied

range may damage the battery and increase the risk

of re.

• STORE YOUR BATTERY AND TOOL in a cool, dry

place. Do not store battery where temperatures may

exceed 120°F (50°C) such as in direct sunlight, a

vehicle or metal building during the summer.

SPECIFIC SAFETY RULES FOR

LASER LEVELS

•Watch out for erroneous results if the tool is

defective or if it has been dropped, misused or

modied.

•Do not dispose of tool or batteries together with

household waste material! Tool and batteries that

have reached the end of their life must be collected

separately and returned to an environmentally

compatible recycling facility.

•Ensure tool magnets are securely mounted to

a metal surface. Magnet strength may not hold

on thin metal surfaces, causing the tool to fall.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact MILWAUKEE for a free replacement.

• The device conforms to the most stringent

requirements of the relevant Electromagnetic

Compatibility (EMC) Standards and Regulations.

Yet, the possibility of causing interference in other

devices cannot be totally excluded.

•

CAUTION

Use of controls or adjustments or

performance of procedures other

than those specied herein may result in hazard-

ous radiation exposure.

• Be sure to power o󰀨 instrument after use. When

instrument will not be used for a long period, place

it in storage after removing batteries.

Federal Communications Commission

WARNING

Changes or modications to

this unit not expressly ap-

proved by the party responsible for compliance could

void the user’s authority to operate the equipment.

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful in-

terference in a residential installation. This equipment

generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance

with the instructions, may cause harmful interference

to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or televi-

sion reception, which can be determined by turning

the equipment o󰀨 and on, the user is encouraged to

try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Consult the dealer or an experienced radio/TV

technician for help.

Produkt Specifikationer

Mærke:	Milwaukee
Kategori:	Laser pointer
Model:	M12 3622-21

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee M12 3622-21 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Laser pointer Milwaukee Manualer

Milwaukee 3522-21 Manual

15 Juli 2025

Milwaukee M12 3624-21 Manual

9 August 2024

Milwaukee M12 3622-21 Manual

28 Februar 2024

Milwaukee 48-35-1211 Manual

17 Oktober 2022

Laser pointer Manualer

Nyeste Laser pointer Manualer

Laserliner DistanceMaster Compact 30 Manual

20 Juli 2025

Laserliner DistanceMaster Plus 80 Manual

19 Juli 2025

Laserliner DistanceMaster Compact Plus 50 Manual

19 Juli 2025

Laserliner MasterCross-Laser XPG Pro Manual

19 Juli 2025

Levenhuk Camo LC1500 Manual

16 Juli 2025

Levenhuk Camo LC900 Manual

16 Juli 2025

Ermenrich LV30 PRO Manual

15 Juli 2025

Levenhuk LX1500 Manual

5 Juli 2025

Ermenrich LT40 Manual

15 Juni 2025

Ermenrich LT10 Manual

14 Juni 2025