Milwaukee M12 3631-20 Manual

Milwaukee Laservandpas M12 3631-20

Læs gratis den danske manual til Milwaukee M12 3631-20 (16 sider) i kategorien Laservandpas. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Milwaukee M12 3631-20, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
Cat. No. / No de cat.
3631-20
M12™ GREEN 360° SINGLE PLANE LASER
LASER MONOPLAN M12™ VERT 360°
LÁSER DE PLANO ÚNICO VERDE DE 360° M12™
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read and understand all instruc-
tions. Failure to follow all instructions
listed below, may result in electric shock, re and/or
serious personal injury. Save all warnings and in-
structions for future reference.
• Save these instructions - This operator's manual
contains important safety and operating instructions.
LASER SAFETY
WARNING
The device produces visible laser
beams, which are emitted from the
tool.
• This device complies with 21 CFR 1040.10 and
1040.11 except for conformance with IEC 60825-1
Ed. 3., as described in Laser Notice No. 56, dated
May 8, 2019.
•Laser light - Do not stare into beam or view
directly with optical instruments. Do not point
laser light at others. Laser light can cause eye
damage.
WORK AREA SAFETY
• Ensure adequate safeguards at the work site
(e.g. surveying site when measuring on roads,
construction sites, etc.).
• Avoid dangerous environments. Avoid extended
exposure to rain, snow, damp or wet locations. Do
not use in the presence of explosive atmospheres
(gaseous fumes, dust or ammable materials).
PERSONAL SAFETY
• Do not allow persons unfamiliar with the tool,
these safety instructions, and the tool's opera-
tor's manual to operate the tool. This tool can be
dangerous in the hands of untrained users.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging
improperly or at temperatures outside the specied
range may damage the battery and increase the risk
of re.
• Store your battery and tool in a cool, dry place. Do
not store battery where temperatures may exceed
120°F (50°C) such as in direct sunlight, a vehicle
or metal building during the summer.
SPECIFIC SAFETY RULES FOR
LASER LEVELS
•Watch out for erroneous results if the tool is
defective or if it has been dropped, misused or
modied.
•Do not dispose of tool or batteries together with
household waste material! Tool and batteries that
have reached the end of their life must be collected
separately and returned to an environmentally
compatible recycling facility.
•Ensure tool magnets are securely mounted to
a metal surface. Magnet strength may not hold
on thin metal surfaces, causing the tool to fall.
•
WARNING
To reduce the risk of injury, when
working in dusty situations, wear
appropriate respiratory protection or use an
OSHA compliant dust extraction solution.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact MILWAUKEE Tool or a trained
professional for additional information or training.
• If using with a lanyard, do not exceed maximum
capacity marked on the lanyard label. Always de-
termine the weight of the product, with all accesso-
ries, when selecting the appropriate lanyard system.
Exceeding maximum capacity may result in serious
injury. See specications for tool and battery weight.
• For best results, use with energy absorbing
lanyards. Ropes, straps or chains may break and
cause failure. Do not use with lanyards at full tension.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact MILWAUKEE for a free replacement.
• The device conforms to the most stringent
requirements of the relevant Electromagnetic
Compatibility (EMC) Standards and Regulations.
Yet, the possibility of causing interference in other
devices cannot be totally excluded.
•
CAUTION
Use of controls or adjustments or
performance of procedures other
than those specied herein may result in hazard-
ous radiation exposure.
• Be sure to power o󰀨 instrument after use. When
instrument will not be used for a long period, place
it in storage after removing batteries.

Produkt Specifikationer

Mærke: Milwaukee
Kategori: Laservandpas
Model: M12 3631-20

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee M12 3631-20 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Laservandpas Milwaukee Manualer

Milwaukee

Milwaukee M12 3631-20 Manual

14 August 2025
Milwaukee

Milwaukee M12 3624-20 Manual

12 August 2025
Milwaukee

Milwaukee M18 RLOHV1200 Manual

21 Juli 2025
Milwaukee

Milwaukee 3421 Manual

15 Juli 2025
Milwaukee

Milwaukee L4 CLLP Manual

9 Juli 2025
Milwaukee

Milwaukee M18 RLOHVG300 Manual

6 Juli 2025
Milwaukee

Milwaukee M18 RLOH600 Manual

6 Juli 2025
Milwaukee

Milwaukee M12 CLLP Manual

5 Juli 2025
Milwaukee

Milwaukee L4 CLL Manual

5 Juli 2025
Milwaukee

Milwaukee RD600 Manual

1 September 2024

Laservandpas Manualer

Nyeste Laservandpas Manualer

Laserliner

Laserliner Quadrum Compact GT 300 S Manual

12 August 2025
Bosch

Bosch GLL 2-10 G Professional Manual

6 August 2025
Bosch

Bosch GRL 250 HV Professional Manual

6 August 2025
Bosch

Bosch GPL 3 G Professional Manual

6 August 2025
Bosch

Bosch GPL 5 G Professional Manual

6 August 2025
Hilti

Hilti PM 2-PG Manual

3 August 2025
Hilti

Hilti POL 10 Manual

3 August 2025
Laserliner

Laserliner MasterPlane-Laser 3G Plus Manual

31 Juli 2025
Laserliner

Laserliner RangeXtender M50 Manual

31 Juli 2025
DeWalt

DeWalt DCLE14221 Manual

29 Juli 2025