Milwaukee 3421 Manual

Milwaukee Laservandpas 3421

Læs gratis den danske manual til Milwaukee 3421 (20 sider) i kategorien Laservandpas. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Milwaukee 3421, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/20
Cat. No. / No de cat.
3421
GREEN CROSS LINE LASER
LASER À LIGNES CROISÉES VERTES
LÁSER DE LÍNEA CRUZADA VERDE
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read and understand all instruc-
tions. Failure to follow all instructions
listed below, may result in electric shock, re and/or
serious personal injury. Save all warnings and in-
structions for future reference.
• Save these instructions - This operator's manual
contains important safety and operating instructions.
LASER SAFETY
WARNING
The device produces visible laser
beams, which are emitted from the
tool.
• This device complies with 21 CFR 1040.10 and
1040.11 except for conformance with IEC 60825-1
Ed. 3., as described in Laser Notice No. 56, dated
May 8, 2019.
•Laser light - Do not stare into beam or view di-
rectly with optical instruments. Do not point laser
light at others. Laser light can cause eye damage.
WORK AREA SAFETY
• Ensure adequate safeguards at the work site
(e.g. surveying site when measuring on roads,
construction sites, etc.).
• Avoid dangerous environments. Avoid extended
exposure to rain, snow, damp or wet locations. Do
not use in the presence of explosive atmospheres
(gaseous fumes, dust or ammable materials).
PERSONAL SAFETY
• Do not allow persons unfamiliar with the tool,
these safety instructions, and the tool's opera-
tor's manual to operate the tool. This tool can be
dangerous in the hands of untrained users.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• This tool is designed to be powered by AA batter-
ies properly inserted into the tool. Do not attempt
to use with any other voltage or power supply.
•Do not leave batteries within the reach of children.
•Do not mix new and used batteries. Do not mix
brands (or types within brands) of batteries.
•Do not mix rechargeable and non-rechargeable
batteries.
• Install batteries according to polarity (+ / –)
diagrams.
• Properly dispose of used batteries immediately.
• Do not incinerate or dismantle batteries.
• Under abusive conditions, liquid may be ejected
from the battery, avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
SPECIFIC SAFETY RULES FOR
LASER LEVELS
•Watch out for erroneous results if the tool is
defective or if it has been dropped, misused or
modied.
•Ensure tool magnets are securely mounted to
a metal surface. Magnet strength may not hold
on thin metal surfaces, causing the tool to fall.
• The device conforms to the most stringent
requirements of the relevant Electromagnetic
Compatibility (EMC) Standards and Regulations.
Yet, the possibility of causing interference in other
devices cannot be totally excluded.
•
CAUTION
Use of controls or adjustments or
performance of procedures other
than those specied herein may result in hazard-
ous radiation exposure.
• Be sure to power o󰀨 instrument after use. When
instrument will not be used for a long period, place
it in storage after removing batteries.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact MILWAUKEE for a free replacement.
Federal Communications Commission
WARNING
Changes or modications to
this unit not expressly ap-
proved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful in-
terference in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or televi-
sion reception, which can be determined by turning
the equipment o󰀨 and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
SYMBOLOGY
Volts
Direct Current
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Magnets
Read operator’s manual

Produkt Specifikationer

Mærke: Milwaukee
Kategori: Laservandpas
Model: 3421

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee 3421 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Laservandpas Milwaukee Manualer

Milwaukee

Milwaukee 3421 Manual

15 Juli 2025
Milwaukee

Milwaukee L4 CLLP Manual

9 Juli 2025
Milwaukee

Milwaukee M18 RLOHVG300 Manual

6 Juli 2025
Milwaukee

Milwaukee M18 RLOH600 Manual

6 Juli 2025
Milwaukee

Milwaukee M12 CLLP Manual

5 Juli 2025
Milwaukee

Milwaukee L4 CLL Manual

5 Juli 2025
Milwaukee

Milwaukee RD600 Manual

1 September 2024
Milwaukee

Milwaukee RD300G Manual

1 September 2024
Milwaukee

Milwaukee 3622-20 Manual

23 Juli 2024
Milwaukee

Milwaukee 48-35-1311 Manual

6 August 2023

Laservandpas Manualer

Nyeste Laservandpas Manualer

Stanley

Stanley Fatmax FMHT1-77415 Manual

9 Juli 2025
NEO Tools

NEO Tools 75-103 Manual

8 Juli 2025
NEO Tools

NEO Tools 75-141 Manual

8 Juli 2025
NEO Tools

NEO Tools 71-200 Manual

8 Juli 2025
NEO Tools

NEO Tools 75-104 Manual

8 Juli 2025
NEO Tools

NEO Tools 75-140 Manual

8 Juli 2025
Stanley

Stanley FMHT1-77413 Manual

8 Juli 2025
Proline

Proline 15179 Manual

8 Juli 2025
Stanley

Stanley FMHT77653 Manual

8 Juli 2025
Stanley

Stanley STHT77504-1 Manual

7 Juli 2025