Milwaukee M18 FUEL 2824-20 Manual

Milwaukee Batteri M18 FUEL 2824-20

Læs gratis den danske manual til Milwaukee M18 FUEL 2824-20 (16 sider) i kategorien Batteri. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Milwaukee M18 FUEL 2824-20, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

Cat. No. / No de cat.

2824-20

M18 FUEL™ DUAL BATTERY BLOWER

SOUFFLANTE À DOUBLE BATTERIE M18 FUEL™

SOPLADOR DE DOBLE BATERÍA M18 FUEL™

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

IMPORTANT

SAFETY

INSTRUCTIONS

WARNING

Read all safety warn-

ings, instructions, il-

lustrations and specications provided with this

power tool. Failure to follow all instructions listed

below may result in electric shock, re and/or serious

injury. Save all warnings and instructions for fu-

ture reference.

READ ALL INSTRUCTIONS

BEFORE USE

WORK AREA SAFETY

•Do not use in the presence of explosive dust,

liquids or vapors. Power tools have motors

and other parts that can produce sparks during

normal use. Do not use within 30 feet of areas

where explosive materials may be present (such

as gasoline pumps and places where liquids like

paint thinners, cleaners, solvents, etc. are stored).

• Do not use where oxygen or anesthetics are

used.

• Do not permit children to use blower. It is not a

toy. Close attention is necessary when used near

children. Store idle power tools out of the reach

of children and do not allow persons unfamiliar

with the power tool or these instructions to oper-

ate the power tool. Power tools are dangerous in

the hands of untrained users.

•Use extra care when using on stairs. Do not over-

reach. Keep proper footing and balance at all

times. Keep work area clean and well lit. This en-

ables better control of the tool in unexpected situations.

•Avoid dangerous environmental conditions. To

reduce the risk of electric shock, do not expose

to rain. Store tool indoors.

• Inspect the area before using the power tool.

Remove all debris and hard objects such as rocks,

glass, wire, etc. that can ricochet, be thrown, or

otherwise cause injury or damage during operation.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

•Always wear eye protection. Use of this tool can

result in foreign objects being blown into eyes,

which can result in eye damage.

•Wear a face or dust mask when working in dust

situations. Dust particles can harm your lungs.

• Use personal protective equipment. Protective

equipment such as hearing protection, protective

clothing, and non-skid safety shoes used for ap-

propriate conditions will reduce personal injuries.

• Dress properly. Do not wear loose clothing or

jewelry. Keep your hair and clothing away from

moving parts. Loose clothes, jewelry or long hair

can be caught in moving parts.

• Do not point tool at self or bystanders. Keep

bystanders 50' away during use. Objects may be

thrown or ricochet in all directions.

• Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles. A careless action can

cause severe injury within a fraction of a second.

POWER TOOL USE AND CARE

• Use the power tool, accessories, etc. in ac-

cordance with these instructions, taking into

account the working conditions and the work

to be performed. Use of the power tool for opera-

tions di󰀨erent from those intended could result in a

hazardous situation.

• Prevent unintentional starting. Ensure the switch

is in the o󰀨-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on

the switch or energizing power tools that have the

switch on invites accidents.

• Use the correct power tool for your application.

The correct power tool will do the job better and

safer at the rate for which it was designed.

• Use only as described in this manual. Use only

manufacturer’s recommended attachments.

• Do not point tool at anything that is burning or

smoking such as cigarettes, matches, or hot ashes.

•To reduce the risk of health hazards from vapors

or dust, do not use tool near tool toxic, carcino-

genic or other hazardous materials such as as-

bestos, arsenic, barium, beryllium, lead, pesticides

or other health endangering materials.

•

WARNING

Some dust created by

power sanding, sawing,

grinding, drilling, and other construction activities

contains chemicals known to cause cancer, birth

defects or other reproductive harm. Some examples

of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well

ventilated area, and work with approved safety

equipment, such as those dust masks that are spe-

cially designed to lter out microscopic particles.

• Do not use power tool if the switch does not

turn it on and o󰀨. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

• Do not put hands or objects into openings. Do

not use with any opening blocked; keep free of dust,

lint, hair, and anything else that may reduce air ow.

• Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

• Maintain power tools and accessories. Check for

misalignment or binding of moving parts, break-

age of parts and any other condition that may

a󰀨ect the power tool’s operation. If damaged,

have the power tool repaired before use. Many

accidents are caused by poorly maintained power

tools.

Produkt Specifikationer

Mærke:	Milwaukee
Kategori:	Batteri
Model:	M18 FUEL 2824-20

Har du brug for hjælp?

Hvis du har brug for hjælp til Milwaukee M18 FUEL 2824-20 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Batteri Milwaukee Manualer

Milwaukee M12 48-59-2401 Manual

12 August 2025

Milwaukee M12 B2 Manual

9 August 2025

Milwaukee MXF HD812 Manual

8 August 2025

Milwaukee M18 REDLITHIUM FORGE 48-11-1861 Manual

15 Juli 2025

Milwaukee M18 FUEL 2824-20 Manual

15 Juli 2025

Milwaukee MXF XC608 Manual

6 April 2025

Milwaukee M18 Fuel 0920-22HD Manual

27 Juni 2023

Milwaukee 48-11-2430 Manual

11 Marts 2023

Milwaukee M12 Fuel 2558-22 Manual

27 Januar 2023

Milwaukee M18 Fuel 2821-21 Manual

16 December 2022

Batteri Manualer

Nyeste Batteri Manualer

Watson SLB-11A Manual

23 September 2025

Watson DMW-BCM13 Manual

22 September 2025

Watson NP-FZ100 Manual

21 September 2025

Varta 00370101111 Manual

15 September 2025

AMX VPA-BP Manual

14 September 2025

Varta CellPac BLOX Manual

14 September 2025

Varta Primary Silver Button 391 Manual

14 September 2025

Varta CR 1220 Primary Lithium Button Manual

14 September 2025

Varta POWERLCD Manual

13 September 2025

Varta Primary Silver Button 344 Manual

13 September 2025