MIOPS RemotePlus Manual

MIOPS Fjernbetjening RemotePlus

Læs gratis den danske manual til MIOPS RemotePlus (24 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om MIOPS RemotePlus, eller vil du spørge andre brugere om produktet?

Side 1/24
RemotePlus User Manual
Content:
1.
Content of the Package
2. Charging and Operation
3. First Use
4. Camera and Flash Connection
5. Mobile Application
6. Connecting to MIOPS RemotePlus
7. Firmware Upgrade
8. Using the Mobile Application
9.
FEATURES
9.1. CABLE RELEASE MODES
9.1.a. Cable Release
9.1.b.
Press & Hold
9.1.c. Press & Lock
9.1.d. Timed Release
9.1.e.
Self Timer
9.1.f. Timed Release & Self Timer
9.2. TIMELAPSE MODES
9.2.a. Basic Timelapse
9.2.b. Long Exposure Timelapse
9.2.c. Bulb Ramping Timelapse
9.2.d. Road Lapse
9.2.e. HDR Timelapse
9.2.f. HDR
9.3.
SMARTPHONE SENSOR MODES
9.3.a. Sound
9.3.b. Vibration
9.3.c. Motion
9.4.
DEVICE SENSOR MODES
9.4.a. Lightning
9.4.b. Sound
9.4.c. Laser
10. SETTINGS
1. Content of the Package
When you purchase a MIOPS RemotePlus, it will be delivered with the following
items.
1 x MIOPS RemotePlus
1 x USB Charge Cable
2. Charging and Operation
MIOPS RemotePlus comes with a rechargeable battery which lasts up to 24 hours
with a single charge. The battery will be charged when you
connect MIOPS RemotePlus to a USB power source. You can use your computer USB
port for this purpose.
You can power MIOPS RemotePlus directly from the USB port.
3. First Use
Your MIOPS RemotePlus may not be delivered with the latest firmware. If a new
firmware has been released, before you have used it for the first time, you should
update the firmware first. To get detailed information about the firmware
upgrade, see the Firmware Upgrade Section.
The rechargeable battery comes partially charged. You can use it right out of the
box but you may need to charge to get it fully loaded. You can charge the battery
using any USB charger (500 mA min.) or the USB port of your computer. MIOPS
RemotePlus will be delivered with a Mini-USB cable. You can use this cable to
charge it. The mini end of the USB cable will be plugged into the USB port. It is
located on the left side of the device under the protective cover.
When you short press the button on the back side of the device, the lights on the
top side will flash for a short time and the device will start to work.
4. Camera and Flash Connection
The MIOPS RemotePlus uses connection cables to trigger your camera or flash unit.
Your unit will be shipped with the proper camera connection cables. The MIOPS
RemotePlus is a versatile device, which is compatible with many brand and models.
You can use the same device with many different cameras by just changing the
connection cable.
The MIOPS RemotePlus has a single output for both the camera and the flash
connection. The port is a 2.5 mm stereo female jack. The camera cable already has
the male 2.5 mm stereo jack on one end. The other end changes depending on the
camera. For flash connection, you should have a cable with 2.5mm stereo jack on
one end and your flash compatible plug on the other end. You may consider
purchasing a MIOPS Flash Adapter if you don't have a compatible flash cable.
The camera and flash cables are designed to trigger the cameras and flash units


Produkt Specifikationer

Mærke: MIOPS
Kategori: Fjernbetjening
Model: RemotePlus

Har du brug for hjælp?

Hvis du har brug for hjælp til MIOPS RemotePlus stil et spørgsmål nedenfor, og andre brugere vil svare dig




Fjernbetjening MIOPS Manualer

MIOPS

MIOPS Splash Manual

3 September 2024
MIOPS

MIOPS RemotePlus Manual

2 September 2024

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer