Mitsubishi Jet Towel Smart JT-S2AP Manual

Mitsubishi håndtørrer Jet Towel Smart JT-S2AP

Læs gratis den danske manual til Mitsubishi Jet Towel Smart JT-S2AP (20 sider) i kategorien håndtørrer. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Mitsubishi Jet Towel Smart JT-S2AP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

− −1

Read the manual thoroughly before beginning installation to ensure the unit is installed safely and correctly.

Local installation standards should be obeyed and installation should be performed by the dealer or a qualiﬁ ed professional.

The "INSTRUCTION MANUAL" is for the customer. Be sure to hand it to the customer.

INSTALLATION MANUAL For Dealers and Installers

Location of Model Name display

Location of power supply

voltage display

Single-phase 220 – 240V AC

INDEX

Safety Precautions …………………………………… 2

■ Checking the installation environment ………… 3

Parts to be installed …………………………………… 4

■ ………………………………………… Main unit 4

■ ……………………………………… Accessories 5

■ Required items …………………………………… 5

Use environment ……………………………………… 6

■ Required space for installation ………………… 6

■ Suitable walls …………………………………… 6

■ ……………………………… Installation position 6

Installation procedure ………………………………… 7

■ …………………… Fixing the installation panel 8

■ Fixing the base …………………………………… 8

■ Removing the terminal cover …………………… 9

■ Wiring ……………………………………………… 9

■ …………………………… Checking the setting 11

■ Attaching the front cover ………………………… 12

Checking after installation …………………………… 13

■ Removing the front cover after installation …… 13

Test Run ………………………………………………… 14

Instructions given to customer ……………………… 14

Hand dryer

1511876HB7401

Unit colour -W (White) -S (Silver)

MODEL

JT-S2AP-W-NE

JT-S2AP-S-NE Heater Model

JT-S2A-W-NE Heater-less Model

− −2

Prohibited

Do not

disassemble

Prohibited

●

Do not install when the unit (power

cable) is electriﬁ ed.

Doing so may result in electric shocks.

Important !

instructions

Safety Precautions

●

The dangers arising from improper handling and the extents of the dangers are classiﬁ ed and explained as shown

below.

Caution The following may lead to minor injuries or damage

to property if the unit is handled incorrectly.

Warning The following may lead to death or serious

personal injury if handled incorrectly.

●

Do not install in locations where they

may be leakages of combustible gas.

This may cause ﬁ res.

●

Do not install in locations where salt

damage may occur or where corrosive,

neutral or reductive gases are present.

This may cause malfunctions.

●

Do not scratch, damage, process,

excessively bend, pull, twist or bundle

the power cable.

Please also refrain from placing heavy

objects onto it or trapping it.

Failure to do so may damage the power

cable, causing ﬁ res or electric shocks.

●

Do not attempt any disassembly or

modiﬁ cation of the unit that is not

expressly stated in this manual.

Doing so may result in ﬁ res, electric

shocks or injuries.

●

Do not use in a hot location such as a

shower room, where condensation may

form on the unit or where water may

splash directly onto the unit.

This may cause electric shocks or

malfunctions.

●

Wiring work is to be done by a certiﬁ ed

electrical worker in accordance with

technical standards for electrical

equipment and int e rna l wiring

regulations.

Incorrect wiring work may cause electric

shocks or ﬁ res.

●

Use single-phase 220 – 240V AC power.



Using the incor rect power supply may cause

ﬁ res, electric shocks or malfunctions.

●

Use exclusive wiring for the power

source.



Using this unit with other devices on a

branch socket may cause abnormal heat,

which may cause ﬁ res.

●

Be sure to install a ground-fault circuit

interrupter.

Failure to do so may result in electric shocks.

●

The unit shall be installed in accordance

with national wiring regulations.

●

A means for disconnection must be

incorporated in the ﬁ xed wiring in

accordance with wiring rules.

Do not use

in the baths/

shower room

Important !

instructions

●

Install securely in a location strong

enough to support the weight of the

unit.

Injuries may be caused if the unit falls off

the wall.

●

Wear gloves when installing the unit.

Not doing so may result in injuries.

Produkt Specifikationer

Mærke:	Mitsubishi
Kategori:	håndtørrer
Model:	Jet Towel Smart JT-S2AP
Type:	Automatisk
Vekselstrømsindgangsspænding:	230 V
Vekselstrømsindgangsfrekvens:	50 Hz
Bredde:	250 mm
Dybde:	160 mm
Højde:	290 mm
Vægt:	4500 g
Produktfarve:	Sølv
Motoreffekt:	880 W
Strøm:	1 A
Strømforbrug (typisk):	660 W
Lydeffektniveau:	60 dB
Lydtryksniveau:	58 dB
Tørretid:	12 sek./side