Portable Power Station 600W
Product Appearance Illustration
①USB/Type-C Switch ②Type-C Output/Input ③QC 3.0 Output ④USB Output
⑤DC Switch ⑥12V/DC Output ⑦ Car Charging Output ⑧DC Input ⑨Anderson Input
⑩LED Flashlight ⑪Cooling Fan ⑫LED Light Switch ⑬AC Output ⑭AC Switch
Remaining output time：Calculate the remaining output time automatically a ording cc
to different electrical load.
Low battery notification：Low battery warning indicator will flash when the battery
Battery percentage display：Show the battery percentage.
Thermometer icon：When the device temperature is too high, the thermometer icon
Output status indicator：Display output status including DC, AC, USB-A，USB-C and LED.
Input P er：ow Display the charge power.
Output P er：ow Output power drawn by the electrical load.
▶Function Illustration of Product Interfaces
▶Display Screen Illustration
Maintain your children's sa ty by keeping this product out of their reach.fe
Please do not tear down this product. Any unauthorized disassembly will void the
Please use the a essories came with the device or recommended by customer cc
Please use the product in a well-ventilated and dry place. Please do not charge the
product if the ambient temperature is under -10°C.
Please keep this product away from flammable substances and high-temperature
When put in storage, please keep the battery power level between 50%~70%, and
put it in a ventilated and dry place.
When put in storage, please charge the products at least once every three months.
It is forbidden to hammer or pitch the product violently.
To prevent electrical shock, it is forbidden to use broken or defective cable as the
It is forbidden to forcefully shutdown the power station.
1. It is recommended to keep the device fully charged before using it for the first time in
case of any inconvenience caused by insufficient power.
2. After pushing the switches ①、⑤、⑭, the corresponding function icon on the screen will
light up, and the corresponding outlet will be powered. Then you can use it a ording to cc
3. You can change the frequency of AC supply a ording to the instruction manual of the cc
electrical equipment or the local standards by pushing the ⑭ button three times. The
frequency will be displayed on the screen.
4. When the outlet is not in use, please press the corresponding button to switch it off and
save the power. If the icon on the screen is dim, it indicates that the power to the outlet is
5. If the ambient temperature is low, it may affect the operating capacity of the product.
Please do not use the device when the ambient temperature is below -10°C, and please
charge the device when the temperature is greater than 0°C.
There are two charging ports (diameters: 5.5mm*2.1mm) on this device. Please charge
a ording to the port type.cc
When the device is being charged, the charge power and battery level will be displayed
on the screen. And when the battery percentage reaches 100%, the charging process will
be stopped automatically.
It takes about 6.5 hours to get this device fully charged
It takes about 11 hours to get this device fully charged
through the car cigarette lighter socket.
(Please keep the car engine running in case it drains the car battery.)
It takes about 8 hours to get this device fully charged
using a 100W solar panel.
Problems Causes Solutions
The indicator on the screen fails
to light up; there could be bad
connection between the adapter
Check if there is a bad connection
between the adapter and the socket
and make sure the socket is powered.
The indicator on the screen fails
to light up. And there is green
Check if there is a bad connection
between the adapter and the device;
please contact our after-sales service
The indicator on the screen lights
up, but still no charging
Please remove the adapter and
contact our after-sales service team.
The device is discharging through
Turn off the DC switch and connect it
The ambient temperature is too
Please charge the device where the
ambient temperature is greater
Please contact our after-sales
The poor connection between
the device and the cable.
Keep the device and the cable in
good connection. Please use the
The circuit protection is activ ed at
For high current DC output, please
use a car cigarette lighter adapter
cable to connect. For AC output,
please make sure the power of the
electrical equipment conforms to the
specification of this devi
The battery power of the device
Please recharge the device.
The ambient temperature is too
Please use the device where the
ambient temperature is greater than
-10℃ in case the low temperature
The power drawn by the load is
far more than what is allowed in
Please stop using the device.
1. Please keep this warranty card properly for future service request.
2. Please do not damage the warranty sticker on the connecting part of the product
3. The warranty period is valid for twelve months from the date of purchase.
4. During the warranty period, if the product itself has quality problems or malfunctions,
the official after-sales personnel will verify that it is true. Repairs and replacement parts
will be provided free of charge.
5. The company reserves the right to modify and interp t all content.re
This warranty does not cover product problems
rel ed to the followingat
1. The product is damaged owing to failure to follow operation instructions or misuse.
2. The warranty sticker on the product is removed or unauthorized teardown of the
3. The product number has been changed or does not conform to this manual.
4. The product was placed in an extreme environment not for its reasonable use
including immersion, shaking, high temperature, and corrosive environment, which led
to evident damage of the product.
5. Product failure caused by external causes beyond our reasonable control including
accidents and natural disasters.
（instantaneous peak power 1000W）
5V/3A,9V/2A,12V/1.5A 18W MAX
(4W)Common brightness & High
brightness & Slow blinking & Fast blinking
Technical Indic ors Unit Parametersat
Portable power station 1, power adapter 1, in-vehicle charger 1,
product instruction manual 1
*All the data above are collected through experiments.
Please contact BPI after-sales service
The device fails to discharge
Make sure the adaptor is well
connected; remove the adapter and
Short circuit of your electrical
Please stop using the equipment.
Short circuit of this device
Please contact BPI after-sales service
Please contact BPI after-sales service
The battery power of the device
Please recharge the device.
The power of the electrical
equipment gradually exceeds
Please use the equipment after power
de-rating or contact our after-sales
service team for device of larger
The over-temperature protection
Please use the device after it cools
The motor in the electrical
equipment like electrical fan, hair
dryer or hand drill is not soft
If the equipment is adjustable, please
start it after power de-rating.
According to the percentage, the power is divided into 11 grids.
The more power indicator grids, the more sufficient power.
