Mobotix Move Mx-VT1A-2-IR Manual

Mobotix Overvågningskamera Move Mx-VT1A-2-IR

Læs gratis den danske manual til Mobotix Move Mx-VT1A-2-IR (10 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Mobotix Move Mx-VT1A-2-IR, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/10
NOTE!
This guide is only valid for the 2MP IR Vandal Turret. For more inform-installing and connecting
ation on the camera, please refer to the other documents (see ). Further Reading, p. 9
Important Installation Notes
n
This camera must be installed by qualified personnel and the installation should conform to
all local codes.
n
n
Do not use this product in a dusty environment.
n
Protect this product from moisture or water entering the housing.
n
Install this product as outlined in this document. A faulty installation can damage the
product!
n
Do not replace batteries of the camera. If a battery is replaced by an incorrect type, the bat-
tery can explode.
n
This equipment is not suitable for use in locations where children are likely to be present.
n
External power supplies must comply with the Limited Power Source (LPS) requirements and
share the same power specifications with the camera.
n
When using a ClassI adapter, the power cord shall be connected to a socket-outlet with
proper ground connection.
n
To comply with the requirements of EN 50130-4 regarding the power supply of alarm systems
for 24/7 operation, it is highly recommended to use an uninterruptible power supply (UPS) for
backing up the power supply of this product.
V1.07_1/29/2024, Order Code: Mx-VT1A-2-IR
Quick Installation
MOBOTIX MOVE 2MP IR Vandal Turret
Mx-VT1A-2-IR
©2024 MOBOTIX AG
Quick Installation 2MP IR Vandal Turret
NOTE! To ensure that the unit is not affected by vibration, twisting, etc. after adjusting the camera,
properly tighten all mounting screws.
Package Contents
Check the package for the items listed below.
2MP IR Vandal Turret
3 x Plastic anchors
3 x self tapping screws
1 x Cable entry cover
1 x Water proof cover
1 x Security Torx Wrench (T 1 0) * 1
1 x Drilling template
Disassembling the Camera
1.
Loosen the screw on the top cover using the T10 Torx wrench.①
2.
Remove the top cover .②
3.
Carefully remove the camera lens module from the bottom camera case .③ ④
2 / 10

Produkt Specifikationer

Mærke: Mobotix
Kategori: Overvågningskamera
Model: Move Mx-VT1A-2-IR

Har du brug for hjælp?

Hvis du har brug for hjælp til Mobotix Move Mx-VT1A-2-IR stil et spørgsmål nedenfor, og andre brugere vil svare dig


Overvågningskamera Mobotix Manualer

Mobotix

Mobotix Mx-VT1A-503-IR Manual

30 August 2025
Mobotix

Mobotix Move Mx-VT1A-2-IR Manual

10 Juli 2025
Mobotix

Mobotix M73 Manual

6 Juli 2025
Mobotix

Mobotix M73A Manual

29 Juni 2025
Mobotix

Mobotix S15 Manual

29 Juli 2024
Mobotix

Mobotix Move VB-4-IR Manual

29 Juli 2024
Mobotix

Mobotix Move SD-330 Manual

29 Juli 2024
Mobotix

Mobotix M15 Manual

29 Juli 2024
Mobotix

Mobotix D15 Manual

29 Juli 2024
Mobotix

Mobotix Move BC-2-IR Manual

29 Juli 2024

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

PTZ Optics

PTZ Optics 20X Manual

4 September 2025
PTZ Optics

PTZ Optics 12X 3G-SDI Manual

4 September 2025
AVer

AVer SF2012H Manual

3 September 2025
AVer

AVer FV2006 Manual

3 September 2025
AVer

AVer PTC320UNV2 Manual

3 September 2025
AVer

AVer PTC115+ Manual

3 September 2025
AVer

AVer SF2121H-DVR Manual

3 September 2025
AVer

AVer PTC500+ Manual

3 September 2025
AVer

AVer FC2020-P Manual

3 September 2025
AVer

AVer FD2000 Manual

3 September 2025