Mobotix Mx-VT1A-503-IR Manual

Mobotix Overvågningskamera Mx-VT1A-503-IR

Læs gratis den danske manual til Mobotix Mx-VT1A-503-IR (10 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Mobotix Mx-VT1A-503-IR, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/10
NOTE!
This guide is only valid for the 5MP Varifocal IR Vandal Turret. For installing and connecting
more information on the camera, please refer to the other documents (see ). Further Reading, p. 9
Important Installation Notes
n
This camera must be installed by qualified personnel and the installation should conform to
all local codes.
n
n
Do not use this product in a dusty environment.
n
Protect this product from moisture or water entering the housing.
n
Install this product as outlined in this document. A faulty installation can damage the
product!
n
Do not replace batteries of the camera. If a battery is replaced by an incorrect type, the bat-
tery can explode.
n
This equipment is not suitable for use in locations where children are likely to be present.
n
External power supplies must comply with the Limited Power Source (LPS) requirements and
share the same power specifications with the camera.
n
When using a ClassI adapter, the power cord shall be connected to a socket-outlet with
proper ground connection.
n
To comply with the requirements of EN 50130-4 regarding the power supply of alarm systems
for 24/7 operation, it is highly recommended to use an uninterruptible power supply (UPS) for
backing up the power supply of this product.
V1.07_1/29/2024, Order Code: Mx-VT1A-503-IR
Quick Installation
MOBOTIX MOVE 5MP Varifocal IR Vandal Turret
Mx-VT1A-503-IR
©2024 MOBOTIX AG
Quick Installation 5MP Varifocal IR Vandal Turret
NOTE! To ensure that the unit is not affected by vibration, twisting, etc. after adjusting the camera,
properly tighten all mounting screws.
Package Contents
Check the package for the items listed below.
5MP Varifocal IR Vandal Turret
3 x Plastic anchors
3 x self tapping screws
1 x Cable entry cover
1 x Water proof cover
1 x Security Torx Wrench (T 1 0) * 1
1 x Drilling template
Disassembling the Camera
1.
Loosen the screw on the top cover using the T10 Torx wrench.①
2.
Remove the top cover .②
3.
Carefully remove the camera lens module from the bottom camera case .③ ④
2 / 10

Produkt Specifikationer

Mærke: Mobotix
Kategori: Overvågningskamera
Model: Mx-VT1A-503-IR

Har du brug for hjælp?

Hvis du har brug for hjælp til Mobotix Mx-VT1A-503-IR stil et spørgsmål nedenfor, og andre brugere vil svare dig


Overvågningskamera Mobotix Manualer

Mobotix

Mobotix Mx-VT1A-503-IR Manual

30 August 2025
Mobotix

Mobotix Move Mx-VT1A-2-IR Manual

10 Juli 2025
Mobotix

Mobotix M73 Manual

6 Juli 2025
Mobotix

Mobotix M73A Manual

29 Juni 2025
Mobotix

Mobotix S15 Manual

29 Juli 2024
Mobotix

Mobotix Move VB-4-IR Manual

29 Juli 2024
Mobotix

Mobotix Move SD-330 Manual

29 Juli 2024
Mobotix

Mobotix M15 Manual

29 Juli 2024
Mobotix

Mobotix D15 Manual

29 Juli 2024
Mobotix

Mobotix Move BC-2-IR Manual

29 Juli 2024

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

Videotec

Videotec NXPTZT SERIES2 Manual

31 August 2025
Videotec

Videotec ULISSE EVO THERMAL Manual

31 August 2025
Videotec

Videotec Maximus MPXR Series2 Manual

31 August 2025
Nedis

Nedis WIFICO12CWT Manual

31 August 2025
Pelco

Pelco IBP121-1I Manual

30 August 2025
Monoprice

Monoprice NextGen 112409 Manual

30 August 2025
Ooma

Ooma SmartCam Manual

29 August 2025
Ikegami

Ikegami ISD-A15S Manual

29 August 2025
Pelco

Pelco C20-DW-6 Manual

29 August 2025
Pelco

Pelco C20-CH Manual

29 August 2025