Monacor EDL-116TW Manual

Monacor Højttaler EDL-116TW

Læs gratis den danske manual til Monacor EDL-116TW (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 58 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 29.5 anmeldelser. Har du et spørgsmål om Monacor EDL-116TW, eller vil du spørge andre brugere om produktet?

Side 1/4
ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS
ELA-Deckenlautsprecher
PA Ceiling Speaker
EDL-15
Bestell-Nr.Order No. 16.3810
EDL-116TW
Bestell-Nr.Order No. 16.3840
EDL-16
Bestell-Nr.Order No. 16.3820
EDL-118TW
Bestell-Nr.Order No. 16.3850
EDL-18
Bestell-Nr.Order No. 16.3830
INSTALLATIONSANLEITUNG
INSTALLATION INSTRUCTIONS
NOTICE DINSTALLATION
ISTRUZIONI PER LINSTALLAZIONE
INSTRUCCIONES DE INSTALACIÓN
INSTRUKCJA INSTALACJI
2
DeutschEnglish
ELA-Deckenlautsprecher
Diese Anleitung richtet sich an Installateure mit
Fachkenntnissen in der 100-V-Beschallungstech-
nik. Bitte lesen Sie die Anleitung vor der Instal-
lation gründlich durch und heben Sie sie für ein
späteres Nachlesen auf.
1 Verwendungsmöglichkeiten
Dieser Lautsprecher ist speziell für den Einsatz in
ELA-Anlagen konzipiert. Er ist mit einem Übertra-
ger für den Betrieb an 100-V-Anlagen ausgestat-
tet. Die Modelle EDL-116TW und EDL-118TW
sind als 2-Wege-System zusätzlich mit einem
Hochtöner ausgestattet.
2 Wichtige Hinweise
Der Lautsprecher entspricht allen relevanten
Richtlinien der EU und trägt deshalb das -Zei-
chen.
Verwenden Sie den Lautsprecher nur im In-
nenbereich. Schützen Sie ihn vor Tropf- und
Spritzwasser sowie vor hoher Luftfeuchtigkeit.
Der zulässige Einsatztemperaturbereich be-
trägt 0 40 °C.
Verwenden Sie zum Reinigen nur ein trocke-
nes, weiches Tuch, niemals Wasser oder Che-
mikalien.
Wird der Lautsprecher zweckentfremdet,
nicht sicher montiert, falsch angeschlossen
oder überlastet, kann keine Haftung für dar-
aus resultierende Sach- oder Personenschäden
und keine Garantie für den Lautsprecher über-
nommen werden.
Soll der Lautsprecher endgültig aus
dem Betrieb genommen werden, über-
geben Sie ihn zur umweltgerechten
Entsorgung einem örtlichen Recycling-
betrieb.
3 Installation
WARNUNG Im Betrieb liegt berührungsge-
fährliche Spannung bis 100 V an
der Anschlussleitung an. Die Ins-
tallation darf nur durch Fachper-
sonal erfolgen.
Achten Sie auf eine richtige Anpassung der
Leistung. Die Summe der Leistungen aller an-
geschlossenen Lautsprecher darf die Verstär-
kerleistung nicht überschreiten. Eine falsche
Anpassung führt zur Zerstörung des ELA-Ver-
stärkers!
1) Vor der Installation des Lautsprechers den
ELA- Verstärker ausschalten, damit die Laut-
sprecherleitung spannungsfrei ist!
2) In die Decke ein entsprechend großes Loch
sägen (Technische Daten, Einbauöffung).
3) Den Lautsprecher über seinen Transformator
an den Verstärker anschließen: Die schwarze
Ader und eine der anderen farbigen Adern,
die der gewünschten Nennbelastung (Laut-
stärke) entspricht, mit der Lautsprecherlei-
tung verbinden:
Modell EDL-15 EDL-16 EDL-18 EDL-
116TW
EDL-
118TW
Nennbelast-
barkeit Aderfarbe
1,5 W weiß weiß weiß weiß
3 W grün blau blau blau blau
6 W rot gelb braun gelb braun
10 W rot rot rot rot
15 W gelb
gemeinsamer Anschluss (z. B. Minuspol) = schwarze Ader
Beim Anschluss von mehreren Lautsprechern
darauf achten, dass die Lautsprecher alle
gleich gepolt werden (z. B. schwarze Ader =
Minuspol) und dass der Verstärker nicht über-
lastet wird.
4) -Die Klemmarme nach oben biegen und fest
halten.
Achtung, Verletzungsgefahr!
Die gespannten Klemmarme gut
festhalten!
5) Den Lautsprecher mit den gespannten Klemm-
armen in den Montageausschnitt einsetzen
und vorsichtig in den Ausschnitt gleiten las-
sen, bis er bündig anliegt.
Änderungen vorbehalten.
PA Ceiling Speaker
These instructions are intended for installers with
specific knowledge in 100 V technology for PA
applications. Please read the instructions care-
fully prior to installation and keep them for later
reference.
1 Applications
This speaker has especially been designed for
applications in PA systems. It is equipped with a
transformer for operation at 100 V systems. As a
2-way system, the models EDL-116TW and EDL-
118TW are additionally equipped with a tweeter.
2 Important Notes
The speaker corresponds to all relevant directives
of the EU and is therefore marked with .
The speaker is suitable for indoor use only.
Protect it against dripping water, splash water
and high air humidity. The admissible ambient
temperature range is 0 40 °C.
For cleaning only use a dry, soft cloth; never
use water or chemicals.
No guarantee claims for the speaker and no
liability for any resulting personal damage
or material damage will be accepted if the
speaker is used for other purposes than orig-
inally intended, if it is not safely installed or
not correctly connected, or if it is overloaded.
If the speaker is to be put out of oper-
ation definitively, take it to a local recy-
cling plant for a disposal which is not
harmful to the environment.
3 Installation
WARNING During operation, there is a haz-
ard of contact with a voltage of up
to 100 V at the connection cable.
The installation must be made by
skilled personnel only.
Observe the load of the PA amplifier by the
speakers. The total power of all speakers con-
nected must not exceed the amplifier power.
An overload will damage the PA amplifier!
1) Before installing the speaker, switch off the
PA amplifier so that the speaker cable will not
carry any voltage!
2) Saw a cutout of the appropiate size into the
ceiling (specifications, mounting cutout).
3) Connect the speaker to the amplifier via its
transformer: Connect the black core and one
of the other coloured cores corresponding
to the desired power rating (volume) to the
speaker cable:
Model EDL-15 EDL-16 EDL-18 EDL-
116TW
EDL-
118TW
Power
rating Core colour
1.5 W white white white white
3 W green blue blue blue blue
6 W red yellow brown yellow brown
10 W red red red red
15 W yellow
common connection (e. g. negative pole) = black core
When connecting several speakers, make sure
that all speakers have the same polarity (e. g.
black core = negative connection) and that the
amplifier is not overloaded.
4) Bend the spring clamps upwards and keep
them in this position.
Attention, risk of injury!
Firmly hold the spring clamps in
place!
5) Insert the speaker with the spring clamps held
in place into the mounting cutout. Carefully
slide the speaker into the cutout until it is
flush with the ceiling.
Subject to technical modification.
Technische Daten Specifications EDL-15 EDL-16 EDL-18 EDL-116TW EDL-118TW
Nennbelastbarkeit Power rating 6 / 3 / 1,5 W 10 / 6 / 3 / 1,5 W 15 / 10 / 6 / 3 W 10 / 6 / 3 / 1,5 W 15 / 10 / 6 / 3 W
Frequenzbereich Frequency range 100 16 000 Hz 90 16 000 Hz 90 16 000 Hz 90 20 000 Hz 90 20 000 Hz
Kennschalldruck SPL 92 dB (1 W/1 m) 92 dB (1 W/1 m) 94 dB (1 W/1 m) 92 dB (1 W/1 m) 94 dB (1 W/1 m)
Max. Nennschalldruck Max. SPL 100 dB 102 dB 106 dB 102 dB 106 dB
Lautsprecher Speaker 13-cm-Breitbänder
full-range speaker, 13 cm
15-cm-Breitbänder
full-range speaker, 15 cm
20-cm-Breitbänder
full-range speaker, 20 cm
2-Wege-Koaxial-LS, 15 cm
2-way coaxial speaker, 15 cm
2-Wege-Koaxial-LS, 20 cm
2-way coaxial speaker, 20 cm
Einbauöffnung Mounting cutout 152 mm 166 mm 216 mm 166 mm 216 mm
Einbautiefe Mounting depth 50 mm 55 mm 85 mm 55 mm 85 mm
Deckenstärke Ceilling thickness 10 40 mm 10 40 mm 10 40 mm 10 40 mm 10 40 mm
Abmessungen Dimensions 182 mm × 50 mm 195 mm × 55 mm 252 mm × 85 mm 195 mm × 55 mm 252 mm × 85 mm⌀ ⌀
Gewicht Weight 0,6 kg 0,84 kg 1,1 kg 0,8 kg 1,13 kg
Einsatztemperatur Ambient temperature 0 40 °C


Produkt Specifikationer

Mærke: Monacor
Kategori: Højttaler
Model: EDL-116TW

Har du brug for hjælp?

Hvis du har brug for hjælp til Monacor EDL-116TW stil et spørgsmål nedenfor, og andre brugere vil svare dig