Monster Adapter LA-FE1 Manual

Monster Adapter Linse LA-FE1

Læs gratis den danske manual til Monster Adapter LA-FE1 (1 sider) i kategorien Linse. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Monster Adapter LA-FE1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

F Mount Adapter E LA-FE1

This product(LA-FE1) is an electronic lens adapter designed for allows Nikon Nikkor F

mount lenses to be used on the Sony E mount mirrorless cameras and retain most of the

lens features.

1.F mount

2.F mount lens contacts

3.F mount lens mounting index

4.F mount lens release

5.F mount mechanical aperture lever

6.E mount

7.E mount lens contacts

8.E mount lens mounting index

9 Tripod screw hole.

1.This product is non-waterproof design, in order to reduce accidents such as ﬁre or

electric shock, do not allow this product to contact liquid or moisture.

2.This product is an electronic device, please do not touch the electronic

communication contact.

3.Do not disassemble, repair or modify this product, otherwise it may cause the

equipment damage to even get injury.

4.Please keep this product out of reach of children. In addition, please note that

small parts constitute a choking hazard.xx

User’s Manual

Warning

①

②

③ ④

Attach and Detach

1.Align the E mount mounting index of this adapter with the mounting index of the E

mount camera body;

2.Attach this adapter to the camera;

3.Rotate this adapter counterclockwise until you hear a "click" sound.

4.Align the mounting index on the F-mount lens with the mounting index of the F-mount

lens of this adapter;

5.Attach the F-mount lens to this adapter;

6.Rotate the F-mount lens clockwise until you hear a "click" sound.

Warning: Before attaching or removing this unit, please switch oﬀ the power of the

camera. If not, that may damage this adapter or the camera. unit, please switch oﬀ the

power of the camera. If not, that may damage this adapter or the camera.

Attaching:

1.Press and hold the F mount lens release switch on this adapter;

2.Rotate the F mount lens counterclockwise until the lens can be separated from the

adapter.

3.Press and hold the lens on the E-mount release switch on the camera;

4.Rotate this adapter clockwise until the product can be separated from the camera.

Note: After detaching the lens, this adapter and the camera, please install cap as soon

as possible to prevent dust or other accidents.

Detaching:

1.This product can only drive F-mount lenses with CPU electronic contacts. Lenses

without those contacts might now work properly.

2.Autofocus can be enabled when attaching AF-I, AF-S and AF-P Nikkor F mount lenses.

(Please refer to the supported lens list).

3.The autofocus speed is related to the combination of camera and lens, the movement

behavior while focusing might diﬀerent with traditional SLR cameras.

4.In some cases, the actual focusing distance may be slightly diﬀerent from the lens

distance scale.

Lens usage

5.When shooting with autofocus in some situations, the minimum focusing distance

scale of the lens may become longer.

6.If you need to manual focus, set the AF switch on the lens to the MF position.

7.When using AF and AI-P series lenses, only manual focus is enabled.

8.When using AF and AF (D) series lenses with an aperture ring, please set the

aperture ring of the lens to the minimum value. Otherwise, inaccurate exposure

may occur.

9.When the lens has the VR function, the VR of the lens can work simultaneously

with the anti-shake function of the camera. If the lens has a VR switch, setting the

switch to Oﬀ will turn oﬀ the anti-shake function of the lens and camera at the

same time. In other cases, the lens and body's anti-shake function will work

together.

10.When the lens has no VR function, the body will automatically turn on ﬁve-axis

anti-shake. If you need to turn oﬀ the anti-shake function, please operate through

the menu of the camera.

11.When the lens weight exceeds 1000g, it is recommended to use a tripod and

attach the tripod to the lens tripod collar other than tripod mount on adapter or

camera.

12.This adapter is not designed for video shooting, autofocus might not work while

shooting videos.

This adapter requires on sensor phase detection function to get autofocus work, so

cameras without this function will not focus properly.

Although some cameras have on sensor phase detection function, it does not enabled in

adapted mode. In this case, this adapter cannot focus properly either.

Supported cameras

As of the end of 2020, the camera models that can use this product:

● Alpha 7 II(With camera ﬁrmware Ver 2.0 or higher)

● Alpha 7 III

● Alpha 7R II

● Alpha 7R III

● Alpha 7R IV

● Alpha 7S III

● Alpha 7C

● Alpha 9

● Alpha 9 II

● Alpha 6100

● Alpha 6300

● Alpha 6400

● Alpha 6500

● Alpha 6600

Other functions can be used, but for camera models with limited auto focus, manual

focus is recommended:

● Alpha 7

● Alpha 7R

● Alpha 7S

● Alpha 7S II

● Alpha 3000

● Alpha 3500

● Alpha 5000

● Alpha 5100

● Alpha 6000

● All NEX cameras

Maintenance

● Please do not touch the internal structure of this adapter. Improper use may cause 

malfunction.

● When cleaning this adapter, please use a blower to blow oﬀ the dust on the surface, and 

then gently wipe it with a dry soft cloth.

● It is strictly forbidden to use any liquid detergent to wipe this adapter.

This adapter can add new functions through ﬁrmware update to improve user experience.

When upgrading, you need a personal computer to connect the E-mount camera body

through a USB data cable and attche this adapter to camera to upgrade. For detailed

upgrade process, please refer to MonsterAdapter Weibo, Facebook or Twitter.

Product speciﬁcations

Size: Approximate 70 x 86 x 35mm(tripod mount attached)

Weight: Approximate 105g(without tripod mount attached), 153g(tripod mount attached)

Included items: Mount adapter x 1, Body cap x 1, Rear cap x 1, Set of printed

documentation.

Since this product will add new features through ﬁrmware updates, the design or

speciﬁcations are subject to change without notice.

Manufacturer: Shenzhen Muohuan Optics-electrical technology Co., Ltd.

Origin: Shenzhen, China

Printing date: February 2021

220

009

99.

..2

226 m

6 m

6 m6 mm

297.35 mm

Parts of the adapter

Produkt Specifikationer

Mærke:	Monster Adapter
Kategori:	Linse
Model:	LA-FE1

Har du brug for hjælp?

Hvis du har brug for hjælp til Monster Adapter LA-FE1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Linse Monster Adapter Manualer

Monster Adapter LA-FE1 Manual

21 Juni 2025

Monster Adapter LA-KE1 Manual

20 Juni 2025

Linse Manualer

Nyeste Linse Manualer

Sigma Contemporary 20mm F2 DG Manual

5 December 2025

Sigma Aizu Prime Line Manual

3 December 2025

Sigma Contemporary 90mm F2.8 DG Manual

3 December 2025

Sigma Contemporary 17mm F4 DG Manual

2 December 2025

Sigma Contemporary 65mm F2 DG Manual

2 December 2025

Sigma Art 35mm F1.2 DG Ⅱ Manual

2 December 2025

Sigma Contemporary 20-200mm F3.5-6.3 DG Manual

30 November 2025

Aputure Fresnel 2X Manual

28 November 2025

Panasonic Lumix S 100-500mm f/5-7.1 O.I.S. Manual

27 November 2025

Fujifilm Fujinon XC13-33mmF3.5-6.3 OIS Manual

20 November 2025