Mooer Free Step Manual

Mooer Ikke kategoriseret Free Step

Læs gratis den danske manual til Mooer Free Step (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 89 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 45 anmeldelser. Har du et spørgsmål om Mooer Free Step, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Specification

Input：（）1/4” mono audio jack. Impedance: 1M Ohms

Output：（）1/4” mono audio jack Impedance: 100 Ohms

Power requirements: 9V DC, center negative.

Current Draw: 70 mA

Dimensions: 154.5mm(D)×73mm(W)×53mm(H)

Weight: 540g

* Disclaimer: Any specification’s update won't be amended

in this manual

Precautions

*Please read carefully before proceeding*

Interference with other electrical devices and Cleaning：

Radios and televisions placed nearby may experience

reception interference.

Operate this unit at a suitable distance from radios

and televisions.

Clean only with a soft, dry cloth.

Heat sources

High humidity or moisture

Product description

The Mooer Free Step brings together a vintage analogue Wah

Wah and a very ﬂexible volume control into one small, strong

and comfortable expression pedal.

In Wah mode you can activate the effect at the touch of your

sole using MOOER’s innovative foot sensing circuit, or you

canoperate it using the more traditional ‘toe down’ footswitch

method. Allowing you to leave it cocked in any position you

like as a ﬁlter. The custom inductor can be dialed in to your

favorite

Wah tone using the very convenient Q Range dial on the side

of the pedal.

In Volume mode the Free Step will stay faithful in retaining

every nuance and detail of your tone. It’s smooth, seamless

transition makes it a joy to use in any rig to control your volume.

The heel down (minimum volume) can be easily adjusted and

set anywhere in the range of 0%-50% using the handy min.

vol. dial on the side of the pedal.

All of this is wrapped up into an incredibly strong and sturdy

expression pedal which will survive for years and years of

even the roughest use.

Main Features

Doubles up as a Wah and Volume in one Pedal

MOOER’s custom inductor provides a truly delicious

Wah sound

Q Range control allows the user to dial in the Wah tone

Selectable foot sensing control or traditional ‘toe down’ on

and off operation in Wah mode

Smooth, seamless volume control

Retains every nuance and detail of your original tone

Wah and Volume pedal

FCC certification

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including

interference that may cause undesired operation.

Connections：

Always turn off the power and all other equipment before

connecting or disconnecting. This will help prevent

malfunction and damage to any of the devices. Make sure

to unplug all connection cables and power cords before

moving this unit.

Power Supply：

Please connect the designated AC adapter to an AC outlet

of the correct voltage. Please be sure to use only an AC

adapter which supplies 9V DC(±10%), , center

negative. Unplug the AC power adapter when not in use or

during electrical storms.

Location：

To avoid deformation, discoloration, or other serious

damage,do not expose this unit to the following conditions：

Direct sunlight

Magnetic fields

Excessively dusty or dirty location

Strong vibration or shock

Handling：

Do not apply excessive force to the switches or controls.

Do not let paper, metal, or other objects into this unit.

Take care not to drop the unit, and do not subject it to shock

or excessive pressure.

Extreme temperature or humidity

Pedal Layout

VOL: Volume pedal only. In this mode freestep will behave like

any ordinary volume pedal. Heel down is minimum volume and

toe down is maximum volume. Minimum volume can be

adjusted between 0%-50% using the MIN VOL dial on the side

of the pedal

5. Pressure SENSOR pads:

Used for activating the wah in sensor setting

6. Touch Switch:

Footswitch for traditional toe down Wah ac tivation

7. MODE swit ch:

Change between the three modes.

Wah/Vol ume/Wah&Volume

8. SENSOR/SWITCH:

Change the activation method when in Wah mode.

9. Q Range dial:

Adjusts t he value of Q range to dial in t he sound

of your wah

10.MIN VOL dial:

Adjusts t he minimum v olume between 0%-50%

of the heel down position when in volume and

wah&volume mode.

1. Power LED:

Indicates the On/Off status and mode of Freestep.

(Red for Wah, Blue for Vol ume)

2. INPUT:

¼ inch audio input Jack

3. OUTPUT:

¼ inch audio output Jack

4. DC input:

Connect a 9v D C power supply centre pin negative

Connections

Connect your instrument to the freestep input using a

standard 1 /4" guitar jack cable.

Connect the output of freestep to the input of your

ampliﬁer, eff ects pedal s or other equipment usi ng a

standard 1 /4" guitar jack cable or connector

Connect a 9v DC power supply to the DC inp ut. Ensure

the polari ty is centre pin negative

Get your foo t on freestep, crank up the volume and have

fun!!!

MOOER AUDIO CO.,LTD

www.mooeraudio.com

MODES

Freestep h as 3 different modes which can be changed u sing

the "MODE switch" on the side of the pedal.

Wah: Wah effect only. You can op erate the wah with two

different methods in this m ode which ca n be changed u sing

the "SENSOR/SWITCH " control.

With this control in SENSOR position, simply place the

sole of your foot onto the pedals pressure sensor pads to

activate the effect.

Remove your foot to deactivate the effect.

With this control in the SWITCH position, lean forward

and apply slight pressure to the front of the pedal with your

foot while the pedal is in the full toe down position to push

the Touch Switch and activate the effect. The effect will

remain active until you use the same method to deactivate it.

Use the Q range dial to adjust the sound of the wah

effect

Part No:6200105 93

W&V: Wah an d Volume mode. In this mode freestep will act as

a volume pedal by default. To activate and deactiva te the wah

effect, use the second method described above in 'wah mode'.

The SENSOR /SWITCH control is inactive in this mode.

When in Volum e mode the LED's will illuminate blue.

When actively in wah mod e the LED's wi ll illuminate red.

(Heel down ) (Toe down)

Produkt Specifikationer

Mærke:	Mooer
Kategori:	Ikke kategoriseret
Model:	Free Step

Har du brug for hjælp?

Hvis du har brug for hjælp til Mooer Free Step stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Mooer Manualer

Mooer GE200 Pro Li Manual

28 August 2025

Mooer Ocean Machine II Manual

12 August 2025

Mooer GS1000 Li Manual

15 Juli 2025

Mooer Groove Loop GL100 Manual

8 Januar 2025

Mooer GE250 Manual

15 December 2024

Mooer GE100 Manual

17 November 2024

Mooer Tube Engine Manual

2 September 2024

Mooer PRIME S1 Manual

1 September 2024

Mooer MICRO DI Manual

21 August 2024

Mooer Echolizer Manual

21 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

WilTec 60002 Manual

31 August 2025

WilTec 61751 Manual

31 August 2025

Samsung DA-F760 Manual

31 August 2025

Xlyne SIONA 2 Manual

31 August 2025

Xlyne QIN XW PRO Manual

31 August 2025

WilTec 61757 Manual

31 August 2025

WilTec 60009 Manual

31 August 2025

WilTec 92728 Manual

31 August 2025

Salton WC-2030 Manual

31 August 2025

WilTec 60023 Manual

31 August 2025