Mooer Mod Factory Pro Manual

Mooer Ikke kategoriseret Mod Factory Pro

Læs gratis den danske manual til Mooer Mod Factory Pro (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Mooer Mod Factory Pro, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
1 A.SPEED、
Adjusts the rate of MODE A
2 A.DEPTH、
Adjusts the depth/mix of MODE A
11
8 9
10
PRESET ON/OFF
1615
10
2 Independent processing modules containing a
total of 16 modulation effects
Adjustable signal chain routing
Store and recall up to 4 user presets
Tap Tempo functionality
Expression pedal expandability
Leslie style ACCELERATION pedal
True stereo outputs
A. SP EE D A. DE PT H A. CO NTRO L B. SP EED B. DE PT H B. CO NTROL
Ste p-ph
Aut o-wah
Vib rat o
A B
B A
TAP
TAP
Hold for
ACCEL
Hold for
21
INPUT EXP
DC 9 V 300mA
20 19 18 17
13 14
12
Power Supply
Use the correct AC outlet to connect the power adapter.
Use a power transformer with a negative external voltage
of 9V (± 10%) ≥300mA, otherwise it will cause equipment damage,
fire or other problems. When unused or thunderstorms please unplug
the power supply.
Electrical interference
When using the unit, the radio and the TV may cause interference.
Use the unit away from the radio and the TV.
Strongly vibrating or shakin
Place the place
Direct sunlight
Magnetic field
Dusty or unclean place
To prevent deformation, discoloration, and other serious damage, avoid the following:
Near heat source
High temperature and humidity
Humidity is large
Precautions
Connections
Before connecting the device or disconnecting it, be sure to turn off the power
and other equipment, which will help to avoid malfunction and damage to other
equipment. Also, make sure that all cables and power cords are disconnected
before moving the unit.
Clean
Please use a dry, soft cloth to clean the unit. If necessary, wipe with
a slightly moist cloth. Do not use rough clean powder, alcohol, paint
thinner, wax, solvent, detergent and chemical agents such as
impregnated wipes.
Operating
Do not use brutal forces to use switches and control elements.
Do not allow paper, metal, and other objects to fall into the machine.
Be careful not to fall, do not subject it to shock and excessive pressure.
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
that may cause undesired operation.
Main Features 3 A.CONTROL、
Adjusts various effect parameters of MODE A
4 B.SPEED、
Adjusts the rate of MODE B
5 B.DEPTH、
Adjusts the depth/mix of MODE B
6 B.CONTROL、
Adjusts various effect parameters of MODE B
7 MODE A 、
Selects the effect type for MODE A
8 ROUTING SWITCH、
Selects the internal signal chain routing (see ROUTING section of this manual)
9 STORE、
Used for saving presets (see USING PRESETS section of this manual)
10、
Selects the effect type for MODE B
11、
Displays the currently selected Preset
12、
This LED will illuminate red when the PRESET FOOTSWITCH is controlling TAP TEMPO
13、
Displays the current speed of the modulation rate
14、
Displays the ON/OFF status of the pedal
15、
Press this footswitch to scroll through presets
Press and hold this footswitch to activate/deactivate tap tempo
When tap tempo is activated, press this footswitch multiple times to control the speed
of the modulation rate
16、
Press this footswitch to turn the pedal on/off
Press and hold this footswitch to activate effect acceleration
17 DC IN、
Connect to a 9VDC power source
18 RIGHT OUTPUT、
Connect to the input of your amplifier using a standard 1/4” jack cable
When used in stereo this output provides the Right Channel. When used
in MONO this output provides DSP BYPASS
19 LEFT OUTPUT、
Connect to the input of your amplifier using a standard 1/4” jack cable
When used in stereo this output provides the Left Channel. When used
in MONO this output provides TRUE BYPASS
20 EXP、
Connect to an external expression pedal using a 1/4” TRS stereo jack cable
21 INPUT、
Connect to the output of your instrument using a standard 1/4” jack cable
Pedal Layout
MODE B
PRESET STATUS LED
TAP TEMPO LED
EFFECT SPEED LED
ON/OFF LED
PRESET
ON/OFF
DUAL ENGINE MODULATION PEDAL
Part No:620010640
A.SPEED A.DEPT H A.CON T ROL B.SPEED B.DEPT H B.CO NT ROL
Routing
MOD FACTORY PRO contains 2 independent Modulation modules (MODE
A/MODE B) which can operate individually or simultaneously. The internal signal
chain routing of the pedal can be adjusted using the ROUTING SWITCH.
1.Serial MODE A > MODE B
The signal will first go to MODE A and then to MODE B
When using this routing the TAP TEMPO controls the rate of MODE A
A B
2.Serial MODE B > MODE A
The signal will first go to MODE A and then to MODE B
When using this routing the TAP TEMPO controls the rate of MODE B
B A
3. PARRALLEL
The signal will first be split into 2 and then go to MODE A and MODE B
simultaneously
The signal will then exit both effect modules and be mixed together before
reaching the outputs of the pedal
When using Parrallel routing you can simulate a dry through WET/DRY setup by
disabling one of the effect modules. To achieve this simply set either MODE A or
MODE B to the ‘Off’ position.
Try setting MODE A to ‘Off’ and ‘MODE B’ to Vibrato whilst in PARRALLEL
routing to discover a very cool chorus type effect.
MODE A Off MODE B Off
Using Presets
MOD FACTORY PRO can store 4 presets which can be scrolled through live using
the PRESET footswitch. When you save a preset the pedal will store all of your
parameter value, routing and expression pedal settings.
The PRESET STATUS LEDs display which preset is currently selected. When the
RED LED is highlighted (on the far left) MOD FACTORY PRO is in pedal mode.
This means that all parameter values will be equal to their respective controls
physical position.
To scroll through presets, press and release the PRESET footswitch
To store a preset
Make all settings you wish to save
Press the STORE button once and the preset LED will begin to flash
Select the preset space where you wish to store your settings by pressing the
PRESET footswitch
Press the STORE button one more time to confirm or move any control on the
pedal to cancel the storage procedure
Connections
IN PU T EX P
DC 9 V 300mA
Expression Pedal
Expand the live performance experience of your MOD FACTORY PRO by using it
with an expression pedal. The expression pedal can be set to control any one
single parameter of the MOD FACTORY PRO.
Connect your expression pedal to the EXP input of the MOD FACTORY PRO
using a 1/4” trs stereo Jack cable.
Simultaneously rotate the control knob of the parameter you wish to set to
the EXP and rock the pedestal of your expression pedal back and forth
Now you have successfully set the expression pedal to control a parameter
of the MOD FACTORY PRO
Specifications
Input: 1/4 "mono jack (impedance 1M Ohms)
Output: 1/4 "mono jack x2 (impedance 100 Ohms)
Sampling rate: 44.1K
Sampling accuracy: 24bit
Power supply: 9V 300mA DC power supply (centre pin negative)
Power consumption: 250mA
Size: 106mm (D) X96mm (W) X53mm (H)
Weight: 400g
* Disclaimer: Specification update is subject to change without notice.
MOOER AUDIO CO.,LTD
www.mooeraudio.com

Produkt Specifikationer

Mærke: Mooer
Kategori: Ikke kategoriseret
Model: Mod Factory Pro

Har du brug for hjælp?

Hvis du har brug for hjælp til Mooer Mod Factory Pro stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Mooer Manualer

Mooer

Mooer Groove Loop GL100 Manual

8 Januar 2025
Mooer

Mooer GE250 Manual

15 December 2024
Mooer

Mooer GE100 Manual

17 November 2024
Mooer

Mooer Tube Engine Manual

2 September 2024
Mooer

Mooer PRIME S1 Manual

1 September 2024
Mooer

Mooer MICRO DI Manual

21 August 2024
Mooer

Mooer Echolizer Manual

21 August 2024
Mooer

Mooer Noise Killer Manual

21 August 2024
Mooer

Mooer Echoverb Manual

21 August 2024
Mooer

Mooer Solo Manual

21 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Simrad

Simrad Active Imaging HD (Thru-Hull) Manual

14 Juni 2025
Garritan

Garritan Harps Manual

14 Juni 2025
Marshall

Marshall CV-H20-HF Manual

14 Juni 2025
Aiphone

Aiphone IXW-MAA Manual

14 Juni 2025
Rival

Rival HM-743 Manual

14 Juni 2025
Lutec

Lutec Avony Manual

14 Juni 2025
Giordani

Giordani G-SAFE & PLAY Manual

14 Juni 2025
Gourmia

Gourmia GAF799 Manual

14 Juni 2025
Arendo

Arendo 307503 Manual

14 Juni 2025
Hughes & Kettner

Hughes & Kettner Tube 100 Manual

14 Juni 2025