Morley ABY Pro Selector Manual

Morley Ikke kategoriseret ABY Pro Selector

Læs gratis den danske manual til Morley ABY Pro Selector (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Morley ABY Pro Selector, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/1
Set Up Example
THANK YOU FOR CHOOSING A MORLEY® SWITCH.
YOU NOW OWN THE BEST SWITCH MADE!
Please take a few minutes to familiarize yourself with the features of your new switch. With common sense handling, it will last for years.
We hope you enjoy using it as much as we enjoyed building it.
WARRANTY
All Morley® pedals are warranted for one year from date of purchase. There is no need to register your pedal for warranty. Simply retain your
original dated purchase receipt. To obtain warranty service, contact the store where purchased.
CONNECTIONS
9V: Use only Morley® 9 VDC 300 milliamp regulated adapter. Center Polarity is negative.
IN: Input jack. Plug instrument into this jack using 1/4" guitar cable.
A & B JACK: Connect amplifiers to these jacks using a 1/4" guitar cable.
NOTE: You'll find cords fit very tightly into the 1/4” jacks. The tight fit helps prevent the cord from being accidentally unplugged. Make sure cords
are completely plugged in for best results.
AC ADAPTER
All Morley® pedals use Morley® 9VDC 300 milliamp regulated adapter. Center pin polarity is negative. Using a non-regulated adapter
could cause a low frequency hum in your amplifier. Using an adapter with the wrong polarity may damage the pedal.
BATTERY USE & REPLACEMENT
The ABY PRO is an active device, meaning it requires power to function. All Morley® pedals are designed to use one 9V battery or a 9V 300mA
Regulated Adapter. Battery access is on the bottom cover via our "Quick Clip" Battery door. We suggest you use a good quality alkaline battery.
To prolong battery life, unplug your cord completely from the IN jack when not using the pedal. When the pedal is not used for extended periods,
remove the battery from the pedal or replace it every six months to prevent leakage problems. Isolation Transformers like the one used in this
ABY PRO do tend to have a higher current draw so we recommend using an adapter whenever possible.
FEATURES:
Isolation Transformer: Channel B is equipped with 1:1 Isolation Transformers to prevent hum from electrical ground related issues and to
balance signal. This maintains tone and volume and allows use of longer cables.
Silent Switching: Gold Contact Relays are used to prevent any switch “pop” or “click”
Polarity Switch (Red Push Button): Flips signal polarity to fix phase cancellation which can cause loss of volume, tone or signal cancellation.
Ground Lift Switch (Black Push Button): Lifts signal ground to fix ground related noise. Overall ground reference remains intact.
Pro Design: No ground hum, no buzz, no switch noise, no crosstalk, no bleed and produces excellent signal integrity.
ABY PRO SELECTOR COMBINER INSTRUCTIONS
The ABY PRO was designed to route one input signal to two output paths (see Set Up Example). Use standard Mono (TS - Tip/Sleeve)
instrument cables. Plug Instrument into INPUT. Connect from ABY PRO Output A to amp #1. Connect from Output B to amp #2. Right switch “A
or B” selects back and forth between each amp individually. Left switch “A and B” turns on signal to both amps combined. LED’s show which
amp is on or off. Signal sound strange? Try pushing the Polarity Switch. Got ground hum or buzz? Try pushing the Ground Lift Switch.
IMPORTANT: DO NOT USE THE ABY PRO ON A
POWERED SPEAKER LINE! YOU WILL DAMAGE THE
ABY PRO, THE AMP AND/OR THE SPEAKER(S).
ABY PRO SPECIFICATIONS
POWER: 9V Battery or Morley 9V 300 mA Regulated Power
Supply (Center Negative)
LED INDICATORS: Channel switched on or off.
DIMENSIONS: 5.5" L x 3.5" W x 2.8" H
CURRENT DRAW: 64 mA

Produkt Specifikationer

Mærke: Morley
Kategori: Ikke kategoriseret
Model: ABY Pro Selector

Har du brug for hjælp?

Hvis du har brug for hjælp til Morley ABY Pro Selector stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Morley Manualer

Morley

Morley 20/20 POWER WAH Manual

5 September 2024
Morley

Morley ABY PRO Manual

4 September 2024
Morley

Morley Analog Multi FX AFX-1 Manual

20 August 2024
Morley

Morley 20/20 Classic Switchless Manual

19 August 2024
Morley

Morley 20/20 Power Manual

19 August 2024
Morley

Morley ABC-Pro Manual

18 August 2024
Morley

Morley ABY Pro Selector Manual

18 August 2024
Morley

Morley Hum Eliminator Manual

7 Maj 2024
Morley

Morley Hum Eliminator 2 Manual

13 Marts 2024
Morley

Morley 20/20 Bad Horsie Manual

11 Maj 2023

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

IFM

IFM LMC840 Manual

20 December 2025
IFM

IFM SMF150 Manual

20 December 2025
Ecler

Ecler VEO-XCTRL4D Manual

20 December 2025
Brondell

Brondell SMB-25 Manual

20 December 2025
Delta

Delta H71PB Manual

20 December 2025
Kichler

Kichler 4D12V27 Manual

20 December 2025
JILONG

JILONG KL-33F Manual

20 December 2025
Govee

Govee H7075 Manual

20 December 2025
Signature Hardware

Signature Hardware Greyfield 481138 Manual

20 December 2025
Aqprox

Aqprox appTPV00 Manual

20 December 2025