Morrison BL260E S2 Manual

Morrison Ikke kategoriseret BL260E S2

Læs gratis den danske manual til Morrison BL260E S2 (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Morrison BL260E S2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

www.morrisonoutdoor.com

Petrol Blower

BL260E S2 & BL 260 S2

Including Engines 1E34F-2E & 1E34FB

Owner’s Manual

Part No: 548313.B.1

Revised November 2018

Important

Please read this Owner’s Manual and the Express Warranty before using this product. The Warranty does not cover

damage due to misuse or failure to follow the operating and assembly instructions.

Keep these instructions in a safe place for future use.

Do not operate this machine before it has

been assembled correctly and you have read

and understood these instructions.

These instructions are intended as a general

guide and do not supersede national or local

codes in any way. Contact local Authorities

for clarity of laws relating to operation of this

appliance.

Keep the instructions in a safe place for future use.

Contents

Warning Symbols on the Machine 2

Symbols in this Owner’s Manual 2

Proper Use 3

Safety Instructions 3

Important Information! 3

Operation Warning! 3

List of Parts 3

Assembling the Blower 4

Mixing Fuel 4

Filling the Fuel Tank 4

Starting the Machine 5

Adjusting Engine Idle Speed 5

Stopping the Engine 6

Using the machine 6

Routine Maintenance 6

Spark Arrestor Maintenance 7

Storage for over 30 days 7

Warning Symbols on the Machine

Caution! Read the operating instructions and

follow the warnings and safety instructions.

This product is for outdoor use only and to

be used in a well ventilated area.

Wear protective eye wear and ear muffs.

1. AVOID DANGEROUS WORK ENVIROMENTS. Do not use

power tool in damp or wet locations or expose power tools

to rain. Do not use power tools in the presence of ﬂammable

liquids or gases as normal sparking of the motor could ignite

fumes. Keep work areas well lit.

2. KEEP CHILDREN AND VISITORS AWAY. Visitors and

children should wear safety glasses and be kept a safe

distance from the work area. Do not let others make contact

with the tool or extension cord.

3. AVOID UNINTENTIONAL STARTING. Always check that the

switch is in the OFF position before plugging in the tool to the

power supply. Do not carry a plugged in tool with your ﬁnger on

the switch.

4. STORE TOOLS SAFELY. When not in use, tools should be

stored in a dry place, high and locked-up place, out of reach of

children.

5. DISCONNECT IDLE TOOLS. Switch off the power and

disconnect the plug from the power supply before servicing,

when changing accessories and when the tool is not in use.

6. DO NOT FORCE THE TOOL. The tool willl do the job better

and safer working at the rate for which it was designed.

7. USE THE CORRECT TOOL FOR THE JOB. Do not force

small tools or attachments to do the job of a heavier duty tool.

Never use a tool for a purpose for which it was not intended.

8. DRESS CORRECTLY. Do not wear loose clothing or jewellery,

they can be caught in moving parts. Rubber gloves and non-

slip footwear and recommended when working outdoors. If you

have long hair, wear a protective h air covering.

9. ALWAYS USE SAFETY ACCESSORIES. Safety glasses and

earmuffs should always be worn. Everyday eyeglasses have

impact resistant lenses only, they are not safety glasses. A face

or dusk mask is also required if dust is going to be created.

10. DON’T OVERREACH. Keep proper footing and balance at all

times. Do not use tool on a ladder or unstable support. Secure

tools when working at elevated levels.

11. MAINTAIN TOOLS WITH CARE. Keep tools sharp and

clean for better and safer performance. Follow instructions

for lubricating and changing accessories. Inspect tool cords

periodically and, if damaged have them repaired by an

authorised service facility. Inspect extension cords periodically

and replace them if damaged. Keep tool handles dry, clean

and free from oil and grease. Never use brake ﬂuids, gasoline,

petroleum based products, or any strong solvents to clean your

tools.

12. REMOVE ADJUSTING KEYS AND WRENCHES. Check to

see that keys and adjusting wrenches are removed from the

tool before switching it on.

13. STAY ALERT AND EXERCISE CONTROL. What was you are

doing and use.

Warning! When in use, and in the cool down

period after use this surface is very hot. Do

not touch as doing so can result in serious

burns.

BLOWER IMPELLER CAN CAUSE

SERIOUS INJURY

Make sure to turn the engine off and wait

for the impeller to come to a complete

stop before opening the cage. Never insert

hand into the tube while unit is on.

KEEP HANDS

AND FEET

CLEAR

Warning! Keep hands and feet clear when

machine is operating as rotating parts can

cause serious injury.

FLAMMABL E

FUEL

Warning! Flammable fuel keep away from

naked ﬂames and cigarettes.

Produkt Specifikationer

Mærke:	Morrison
Kategori:	Ikke kategoriseret
Model:	BL260E S2

Har du brug for hjælp?

Hvis du har brug for hjælp til Morrison BL260E S2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Morrison Manualer

Morrison BL260E S2 Manual

30 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Hozelock 5102 Manual

2 August 2025

ART 310 Manual

2 August 2025

Gorenje KAS53ZDCINVFT Manual

2 August 2025

Gorenje KAS35ZDCINVFT Manual

2 August 2025

Navman MY450LMT Manual

2 August 2025

Navman MiVue 745 Manual

1 August 2025

Hitachi WR22SE Manual

1 August 2025

Synology M2D20 Manual

1 August 2025

Fluke FibertLert-125 Manual

1 August 2025

Buffalo GC882 Manual

1 August 2025