Motorola MBP621 Manual

Motorola Babyalarm MBP621

Læs gratis den danske manual til Motorola MBP621 (2 sider) i kategorien Babyalarm. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om Motorola MBP621, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

MODELS:

MBP621

MBP621-2

MBP621-3

MBP621-4

QUICK START GUIDE

For a full explanation of all features and instructions, please refer to the User’s Guide.

1. Setting up your Digital Video Baby Monitor

1. Insert the DC plug of

the power adapter

with the smaller DC

plug into the DC jack

on the side of the

baby unit, as shown.

2. Connect the other

end of the power

adapter to a suitable

electrical outlet.

A. Baby unit power supply

DC JACK

DC PLUG

B. Parent unit battery installation and power supply

Battery JACK

Battery PLUG

A rechargeable battery pack is supplied and should be

fitted, so that the parent unit can be carried to another

location without losing the link and picture from the

baby unit(s). Charge the parent unit before using it for

the first time or when the parent unit indicates that

battery is low.

1. Remove the belt clip/stand if it is attached to the

parent unit.

2. Slide off the battery compartment cover.

3. Insert the plug of the rechargeable battery pack into

the jack inside the battery compartment, and fit the

battery pack into the compartment.

4. Slide the battery compartment cover back until it

clicks into place, and re-attach the belt clip/stand.

5. Insert the DC plug of the power adapter with the

bigger DC plug into the DC jack on the side of the

parent unit.

6. Connect the other end of the power adapter to a

suitable electrical outlet.

7. The battery level indicator comes on.

1. The belt clip/stand attaches to the back of the parent unit and clips into the locking

slots on each side.

NOTE

It will only fit one way, as indicated by UP and the arrows on the inner side of the clip.

2. The unit comes with the accessory fitted in the belt clip position.

3. You can convert it into the desktop position by simply pulling the back part of the clip

out slightly and then rotating it by half a turn, as shown in the diagram on the left.

C. Belt clip/stand on parent unit

Belt clip position Desktop position

WARNING:

Strangulation Hazard. Children have

STRANGLED in cords. Keep this cord

out of the reach of children (more than

3ft (1m) away). Never use extension

cords with AC Adapters. Only use the

AC Adapters provided.

2. Basic explanation of the display icons

3. General Information

If your product is not working properly...

1. Read this Quick Start Guide or the User’s Guide.

2. Visit our website: www.motorola.com

3. Contact Customer Service:

Parent Unit

Connection status

displays when strong signal strength is detected between the baby unit and the parent unit.

displays when moderate signal strength is detected between the baby unit and the parent unit.

displays when the link between the baby unit and the parent unit is lost.

displays when the parent unit is searching for a baby unit.

Current view status Displays the number of the baby unit that is being viewed.

Zoom Displays when the camera on the baby unit is zoomed in.

Volume off Displays when the volume is turned off.

Sound activation

- You can turn Sound activation function ON or OFF. To check on your baby whenever there is sound in the baby’s room,

please turn it ON.

- Displays when sound activation is ON. When the baby unit detects a sound in the baby's room, the video image of the baby

will be displayed on the parent unit.

61oFCurrent

temperature Displays the current room temperature of the selected baby unit.

Battery status

scrolls when the battery is charging; displays when the battery is fully charged; displays when the

battery is low and needs charging; displays when you do not have a battery installed but operates using AC power, or the

battery has been installed incorrectly.

Camera selection You can select the baby unit you want to view, or view all baby units in Scan Mode.

Brightness You can change the brightness of the screen.

Sensitivity You can change the sound sensitivity level of the baby unit. The higher the sound sens

itivity level, the more sensitive the baby unit

is in detecting sounds and transmitting them to the parent unit.

Pairing The system comes with baby unit(s) already paired with the parent unit. You can add or replace baby units.

US and Canada 1-888-331-3383

Email: support@motorolamonitors.com

Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this

product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola

Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their

respective owners.

Printed in China

US_EN Version 7.0

Produkt Specifikationer

Mærke:	Motorola
Kategori:	Babyalarm
Model:	MBP621
Brugervejledning:	Ja
Produktfarve:	Grey,White
Pakkevægt:	664 g
Pakkedybde:	107 mm
Pakkebredde:	17 mm
Pakkehøjde:	157 mm
Skærm diagonal:	1.8 "
Indbyggede højttaler(e):	Ja
Hurtig start guide:	Ja
Batterier inkluderet:	Ja
LED-indikatorer:	Ja
Kan monteres på væggen:	Ja
Strømkilde type:	Batteri
Indbygget mikrofon:	Ja
Frekvensbånd:	2.4 GHz
Modtager bredde:	200 mm
Modtager dybde:	100 mm
Modtager højde:	100 mm
Modtager vægt:	272 g
Sensortype:	CMOS
Digital zoom:	Ja
Grænseflade:	FHSS
Vis antal farver:	65.536 farver
Fast brændvidde:	3.6 mm
LED type:	IR
Nattilstand:	Ja
Maks. rækkevidde:	300 m
Temperaturføler:	Ja
Bælteclip:	Ja
Smartphone support:	Ingen