Moultrie Game Spy Manual

Moultrie Kamera Game Spy

Læs gratis den danske manual til Moultrie Game Spy (2 sider) i kategorien Kamera. Denne vejledning er vurderet som hjælpsom af 54 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 27.5 anmeldelser. Har du et spørgsmål om Moultrie Game Spy, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

CAMERA OVERVIEW

Instructions for GameSpy

Digital Game Camera

THANK YOU for your purchase of your GameSpy Digital Game Camera. Please read this booklet before

using the unit. If you should have any questions about this product or any other Moultrie product,

please contact us using the information on the back of this booklet. Please register your camera at

www.moultriefeeders.com/warranty to activate your 1-year warranty.

BOTTOM VIEW

LCD DisplayMode Selector

Enter Button

Down Button

1/4” 20 Mount

Battery

Chamber

SD Card Slot

LED Flash

Camera Lens

SIDE VIEW

External Power Port

Motion Sensor

Up Button

Micro USB Port

IMPORTANT INFORMATION

Important Battery lnformation

- Only use Alkaline or Lithium batteries. We recommend the use of Energizer™ batteries.

- Do not mix old and new batteries. Always replace ALL the batteries at the same time.

- When the camera is not in use, please remove the batteries.

Moultrie Limited Warranty

This product has been thoroughly tested and inspected before shipment. It is guaranteed from

defects in material and workmanship from the date of purchase for 1 year. Under this limited

guarantee we agree to replace or repair free of charge any part or parts which have been found to

be defective in original material or workmanship. Should you require in-warranty service, call our

Customer Service Department. If your problem cannot be addressed over the telephone, we may

need you to send us your defective product plus proof of purchase.

You must register your camera at www.moultriefeeders.com/warranty to activate

your 1-year warranty.

Troubleshooting

Please visit www.moultriefeeders.com/contact-us for troubleshooting and helpful tips.

Returns and Repairs

Please visit http://www.moultriefeeders.com/return-policy and complete the form or

our

Service Department will gladly answer any questions you have. Call 800-653-3334,

Monday - Friday, 8:00 AM to 5:00 PM CST.

www.moultriefeeders.com

FCC Statements

Moultrie Products, LLC

MCG-13034

Note: changes and modiﬁcations not expressly approved by the party responsible could void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

NOTE: This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable

protection against harmful interference in a residential installation. This device generates,

uses, and can radiate radio frequency energy

and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference

will not occur in a particular installation. If this device does cause harmful interference to radio or television reception,

which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- lncrease the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

12092015 • MCG-13034

Game Spy

PRADCO Outdoor Brands • 3280 Highway 31, Ste B • Cal era, AL 35040

INSIDE VIEW

Status/Battery Indicator LED

GameSpy_2016 Manual_ENGLISH_12-9-15.indd 1 12/9/15 1:48 PM

Setting Time and Date

While the camera is in the Setup mode, the LCD display will show the time.

Press the Enter button and the selection

will ash. Use the buttons UP/Down

to change the selection. Press the Enter

button to lock in the selection and move

to the next selection. Repeat the process to set the year, month and day.

Setting Camera ID

Use the buttons to choose between nine dierent numbers (1-9) to help identify your cameras Up/Down

(i.e. “CAMERA 3”

will be marked on the info strip given 3 was selected). Press to lock in your selection Enter

and move to the next selection.

Reset Picture Count/Erase Images/Format Card

You can reset the picture count on the camera. Use the buttons to choose between Yes or No. Press the Up/Down

Enter button to conrm the selection. “Yes” will reset le number to start from 0001 and erase all images stored

on the SD card.

NOTE: This will also format your SD card for use in your camera.

CAMERA SETUP

Battery Installation

Open the camera door and install 4 AA Alkaline or Lithium batteries. Make sure that the (+ and -) polarities

match the polarities indicated inside the battery chamber.

Note: Anytime you load or unload batteries make sure the camera is OFF. If using 12V DC Power Port to

connect to external supply, do not remove internal batteries.

Insert SD Card

You will need to open the camera door to insert an SD memory card. You can insert an SD Card up to 32GB.

Insert the card in the direction indicated on the card until you hear an audible click. Camera will not operate

without an SD memory card installed.

Mounting with a Strap

Close cover and place camera on a tree or pole approximately 3 ft.

high. Thread the mounting strap through the mounting strap slots

on the back of the camera and secure.

Hint: If you are mounting camera to cover a trail, face the

camera down the trail tilted at a slight downward angle.

Face the camera North or South to avoid over exposure

from the sun.

Clear brush away from camera front to

avoid false triggers from the wind.

Trail

YES

Trail

Power ON

Slide the power switch to the SETUP position. The time and current settings will appear on the LCD Display.

To begin modifying the camera settings press ENTER. The rst setting will begin ashing. Use the UP and DOWN

arrow Keys to change the currently ashing options. Once setting is adjusted to the desired option, press ENTER

to lock in the setting and move to the next eld/option.

Note: while in SETUP mode, the motion sensor will detect

movement and illuminate the STATUS LED on the front of

the camera for ~1 second. You can use this feature to ensure

camera is properly aimed to detect movement in the desired

target area.

The user-selectable options and settings are in the order below.

SET

TIME

SET

DATE

SET

OPTIONS

HOUR

MONTH

MINUTE

DAY

AM/PM

YEAR

DELETE/

FORMAT SD

ENTER ENTER

Setting Capture Mode

Use the buttons to choose between 5 dierent modes: 1 Photo/Low Resolution, Up/Down

1 Photo/High Resolution, 3 Photos/Low Resolution, 3 Photos/High Resolution and Video.

Press Enter to lock in your selection and move to the next selection.

The on-screen icons for each mode are shown below:

L o

L o 3

1 Photo, Low Resolution

1 Photo, High Resolution

3 Photos, Low Resolution

3 Photos, High Resolution

Video

Pressing ENTER after selection of DELETE option will complete setup. To arm the camera and begin capturing

images, switch camera to ON. Camera will then countdown from 10 and be ready for use.

Detection Delay Setting

Detection Delay determines the number of minutes between pictures when an animal is detected and remains

in range.

Press the button. Use the buttons to choose between (5, 10, 15, 30 sec, 1 or 5 min). OK Up/Down

Press Enter to lock in your selection and move to the next selection.

ENTER ENTER ENTER

DETECTION

DELAY

CAPTURE

MODE

CAMERA

GameSpy_2016 Manual_ENGLISH_12-9-15.indd 2 12/9/15 1:48 PM

Produkt Specifikationer

Mærke:	Moultrie
Kategori:	Kamera
Model:	Game Spy

Har du brug for hjælp?

Hvis du har brug for hjælp til Moultrie Game Spy stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kamera Moultrie Manualer

Moultrie P-120i Manual

5 September 2024

Moultrie AM-900 Manual

5 September 2024

Moultrie Micro-42 Manual

5 September 2024

Moultrie M-880 Gen 2 Manual

5 September 2024

Moultrie GM-80xt2 Manual

5 September 2024

Moultrie BC-800 Manual

5 September 2024

Moultrie AC-900i Manual

5 September 2024

Moultrie BC-900i Manual

5 September 2024

Moultrie A-30 Manual

5 September 2024

Moultrie A-30i Manual

5 September 2024

Kamera Manualer

Nyeste Kamera Manualer

IMILAB C22 Manual

9 Juni 2025

Overmax Camspot 4.8 Manual

9 Juni 2025

Overmax Camspot 4.0 PTZ Manual

8 Juni 2025

Rollei HD-30 Manual

29 Marts 2025

Rollei Security Cam 1080p Manual

29 Marts 2025

Aida HD-NDI-X20 Manual

27 Marts 2025

Marshall Electronics CV228 Manual

12 Marts 2025

AViPAS AV-1180 Manual

12 Marts 2025

Fujifilm FinePix JX500 Manual

14 Januar 2025

Canon WFT-E9 Manual

13 Januar 2025