Moxa NPort 5650-8-DTL Manual

Moxa Server NPort 5650-8-DTL

Læs gratis den danske manual til Moxa NPort 5650-8-DTL (5 sider) i kategorien Server. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Moxa NPort 5650-8-DTL, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

– – – – – – 1 2 3

P/N: 1802056000010

NPort 5600-8- DTL

Quick Installation Guide

First Edition, March 2011

Overview

The NPort 5600-8- DTL series includes the following models:

• NPort 5610-8-DTL: 8 ports, RS-232, 0 to 60°C

• NPort 5650-8-DTL: 8 ports, RS-232/422/485, 0 to 60°C

• NPort 5650I-8-DTL: 8 ports, RS-232/422/485, 0 to 60°C,

2KV optical isolation.

• NPort 5610-8- -DTL T: - - 8 ports, RS 232, 40 to 75°C

• NPort 5650-8- -DTL T: 8 ports, RS-232/422/485, - 40 to 75°C

• NPort 5650I-8- -DTL T: -8 ports, RS 232/422/485, 2KV

optical isolation, -40 to 75°C

Package Checklist

The NPort 5600-8- DTL package should contain the following items:

• NPort 5600-8-DTL device server

• Wall mounting and DIN- Rail kits

• Stick- on pads

• Documentation and software CD

• Quick installation guide (printed)

• Warranty card

Optional Accessories*

• DK-35A: DIN-R ail mounting kit (35 mm)

Note: Please notify your sales representative if any of the above

items are missing or damaged.

*Optional Accessories can be ordered separately.

Hardware Introduction

Top and Rear Views

Front View

Reset Button

Use a pointed object to hold the reset button down for at least five

seconds to load the factory defaults. Release the reset button

when the Ready LED stops blinking.

LED Indicators

The LED indicators on the top panel are used to display the status

as follows:

Name

Color

Function

PWR

red

Power is on.

off

Power is off.

Ready green Steady: NPort is operational

Blinking: NPort is responding to NPort

Administrator “Locate” function or NPort is

resetting to factory default

off

Power is off or fault condition exists.

Fault

red

IP conflict or DHCP or BOOTP server did not

respond properly.

off

No fault condition detected.

Link

green

Steady: Network is connected no data is ;

being transmitted.

Blinking: ; Network is connected data is

being transmitted.

off Ethernet cable is disconnected or has a

short.

InUse

(P1 to

P8)

green

Serial port has been opened by server side

software.

off

Serial port is not currently opened by server

side software.

TX/RX

(P1 to

P8)

green (Tx)

Serial device is transmitting data.

orange (Rx)

Serial device is receiving data.

off

No data is flowing to or from the serial port.

Hardware Installation

STEP 1: After removing the NPort 5600-8- DTL from the box, place

it on a desktop or other horizontal surface. Connect the 12-48 VDC

power adaptor to the NPort 5600-8-DTL’s power input when using

an AC power source, or connect the NPort 5600-8-DTL’s terminal

block directly to a DC power source.

STEP 2: Use an Ethernet cable to connect the NPort 5600-8- DTL to

a network hub or switch. You can also connect directly to your

computer’s Ethernet port, which is convenient for initial

configuration or testing.

STEP 3: Connect the NPort 5600-8-DTL’s serial port to a serial

device.

Wall or Cabinet Mounting

The NPort 5600-8- DTL comes with two metal attachment plates to

allow installation on a wall or the inside of a cabinet. First, attach

the brackets to the back of the NPort with screws. Next, mount the

unit on a wall or cabinet with screws. Screws should be less than

6.0 mm in head diameter, and less than 3.5 mm in shaft diameter.

Produkt Specifikationer

Mærke:	Moxa
Kategori:	Server
Model:	NPort 5650-8-DTL
Vægt:	1770 g
Opbevaringstemperatur (T-T):	-40 - 85 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Ethernet LAN-porte (RJ-45):	1
Driftstemperatur (T-T):	0 - 60 °C
Ethernet LAN-datahastigheder:	10, 100 Mbit/s
Dimensioner (BxDxH):	44 x 125 x 197 mm
Certificering:	EN 55022 Class A, FCC Part 15 Subpart B Class A, CE, FCC, EN 55024
Kabelteknologi:	10/100Base-T(X)
Understøttede netværksprotokoller:	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, Rtelnet, ARP, RFC2217
LED-indikatorer:	Ja
Kompatible operativsystemer:	Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8 x86/x64, 2012 x64, XP Embedded
Isolering:	1.5 kV
Flowkontrol support:	Ja
Seriel grænsefladetype:	RS-232/422/485
Antal serielle porte:	8
RS-232 signaler:	CTS, DCD, DSR, DTR, GND, RTS
RS-422 signaler:	GND
RS-485 signaler:	Data+, Data-, GND
Sikkerhed:	UL 60950-1, EN 60950-1
Link/Act LED:	Ja