Moxa NPort IA-5250 Manual

Moxa Server NPort IA-5250

Læs gratis den danske manual til Moxa NPort IA-5250 (4 sider) i kategorien Server. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Moxa NPort IA-5250, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

— 1 — — 2 — — 3 —

NPort IA5150/5250 Series

Quick Installation Guide

Fourth Edition, September 2008

1. Overview

NPort IA device servers deliver easy and reliable serial-to-Ethernet

connectivity for the industrial automation market. The servers support

several operation modes—TCP Server, TCP Client, UDP, Real COM,

Pair Connection, and Ethernet Modem—ensuring the compatibility of

network software, and are an ideal choice for connecting

RS-232/422/485 serial devices, such as PLCs, sensors, meters, motors,

drives, barcode readers, and operator displays. NPort IA device servers

come with a compact and rugged DIN-Rail mountable casing.

2. Package Checklist

Before installing NPort IA device servers, verify that the package

contains the following items:

• 1 NPort IA Series Device Server

• Documentation and Software CD

y NPort IA Series Quick Installation Guide

Optional Accessories

y DR-4524 45W/2A DIN-Rail 24 VDC Power Supply with

universal 85 to 264 VAC input

y DR-75-24 75W/3.2A DIN-Rail 24 VDC Power Supply

with universal 85 to 264 VAC input

y DR-120-24 120W/5A DIN-Rail 24 VDC Power Supply with

88 to 132 VAC/176 to 264 VAC input by switch

Notify your sales representative if any of the above items is missing or

damaged.

3. Hardware Introduction

NPort IA device servers are used to control RS-232/422/485 devices

for industrial automation environments. Six of the models have 1

RS-232/422/485 serial port. NPort IA5150, NPort IA5150I, NPort

IA5150-M-SC, NPort IA5150I-M-SC, NPort IA5150-S-SC, and NPort

IA5150I-S-SC have 1 male DB9 port for the RS-232 interface, and a

5-pin terminal block for the RS-422/485 interface (only one port can be

used at a time). One model has 2 RS-232/422/485 serial ports. NPort

IA5250 has two male DB9 ports for all interfaces.

NPort IA5150 Series Appearance

Reset

Top View Bottom ViewFront View

Reset

V1+

V2+

Dual power input

and relay output

PWR1

PWR2

RDY

5150-M-SC

Fiber optic

Ethernet

RS-232 RS-422/485P1

RS-232

RS-422/485

LED

Indicators

NPort IA5250 Appearance

PWR1

PWR2

RDY

Ethernet 1

Ethernet 2

Reset

5250

Copper

Ethernet

LED

Indicators

Top View Bottom ViewFront View

Reset

V1+

V2+

Dual power input

and relay output

RS-232/422/485

RS-232/422/485P1 P2

Reset Button—Press the Reset button continuously for 5 sec to load

factory defaults: Use a pointed object, such as a straightened paper clip or

toothpick, to press the reset button. This will cause the Ready LED to

blink on and off. The factory defaults will be loaded once the Ready LED

stops blinking (after about 5 seconds). At this point, you should release

the reset button.

NPort IA LED Indicators (front panel)

Name Color Function

PWR1,

PWR2 red Power is being supplied to power input PWR1,

PWR2.

red

Steady on: Power is on and NPort IA is booting

up.

Blinking: Indicates an IP conflict, the DHCP

or BOOTP server did not respond

properly, or a relay output occurred.

green

Steady on: Power is on and NPort IA is

functioning normally.

Blinking: The device server has been located

by Administrator’s Location

function.

Ready

off Power is off, or a power error condition exists.

Orange 10 Mbps Ethernet connection.

Green 100 Mbps Ethernet connection.

Ethernet

off Ethernet cable is disconnected, or has a short.

orange Serial port is receiving data.

green Serial port is transmitting data.

P1, P2

off No data is being transmitted or received through

the serial port.

FX orange

Steady on: Ethernet fiber connection, but port is

idle.

Blinking: Fiber port is transmitting or

receiving data.

4. Hardware Installation Procedure

STEP 1: After removing NPort IA from the box, the first thing you

should do is connect the power adaptor. Connect the 12-48

VDC power line with NPort IA’s terminal block, or connect

the DIN-Rail power supply with NPort IA’s terminal block.

STEP 2: Connect NPort IA to a network. Use a standard

straight-through Ethernet cable to connect to a Hub or

Switch. When setting up or testing NPort IA, you might find

it convenient to connect directly to your computer’s Ethernet

port. In this case, use a cross-over Ethernet cable.

STEP 3: Connect NPort IA’s serial port to a serial device.

STEP 4: NPort IA is designed to be attached to a DIN-Rail or

mounted on a wall. The two sliders on NPort IA’s rear panel

serve a dual purpose. For wall mounting, both sliders should

be extended. For DIN-Rail mounting, start with one slider

pushed in, and the other slider extended. After placing the

NPort IA on the DIN-Rail, push the extended slider in to

lock the device server to the rail. The two placement options

are illustrated in the accompanying figures.

P/N: 1802051500211

Produkt Specifikationer

Mærke:	Moxa
Kategori:	Server
Model:	NPort IA-5250
Vægt:	380 g
Opbevaringstemperatur (T-T):	-40 - 85 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Driftstemperatur (T-T):	0 - 55 °C
Dimensioner (BxDxH):	29 x 89.2 x 118.5 mm
Certificering:	CE, FCC
Understøttede netværksprotokoller:	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP V1, HTTP, SNTP
LED-indikatorer:	Ja
Kompatible operativsystemer:	Windows 95, 98, ME, NT, 2000, XP, 2003, Vista, XP x64, 2003 x64, Vista x64\r\nSCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i\r\nLinux kernel 2.4.x, 2.6.x
Isolering:	1.5 kV
Administrationsprotokoller:	SNMP v1
Seriel grænsefladetype:	RS-232/422/485
Antal serielle porte:	2
Sikkerhed:	UL (UL60950-1), UL508, TÜV (EN60950-1)
Link/Act LED:	Ja