Moxa NPort P5150A Manual

Moxa Server NPort P5150A

Læs gratis den danske manual til Moxa NPort P5150A (5 sider) i kategorien Server. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Moxa NPort P5150A, eller vil du spørge andre brugere om produktet?

Side 1/5
P/N: 1802051501013
*1802051501013*
NPort P5150A Series
Quick Installation Guide
Vers 20ion January 2.3, 21
Technical Support Contact Information
www.moxa.com/support
21 . A20 Moxa Inc ll rights reserved.
- - 2
Overview
NPort P5150A series of device servers , -are compact palm sized data
communication device allow serial s that -you to control RS 232/422/485
devices over a TCP/IP based Ethernet- .
NOTE
“-T indicates an extended temperature model.
Package Checklist
Before installing the NPort P5150A series of device server, verify that the
package contains the following items:
1 NPort P5150A serial device server
- 4 stick on pads
Quick Installation Guide
Product Warranty Statement
Optional Accessory
- -R DK 35A: DIN ail Mounting Kit (35 mm)
Notify your sales representative if any of the above items are missing or
damaged.
Hardware Introduction
As shown in the following figures, NPort P5150A series of device servers
have RS one male DB9 port for transmitting - . 232/422/485 serial data
Reset ButtonPress and hold the Reset button for 5 seconds to load
factory defaults: Use a pointed object, such as a straightened paper clip
or toothpick, to depress the reset button. This will cause the Ready LED to
blink on and off. Once the Ready LED stops blinking (after about 5
seconds), release the reset button and the device server will start to load
the factory defaults.


Produkt Specifikationer

Mærke: Moxa
Kategori: Server
Model: NPort P5150A

Har du brug for hjælp?

Hvis du har brug for hjælp til Moxa NPort P5150A stil et spørgsmål nedenfor, og andre brugere vil svare dig