MTX Audio iWa225 Manual


Læs gratis den danske manual til MTX Audio iWa225 (15 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om MTX Audio iWa225, eller vil du spørge andre brugere om produktet?

Side 1/15
Owner’s manual
iWa225
Smart in-wall Bluetooth® 2x25W amplifier
Designed by MTX in Phoenix, AZ - USA
mtxaudio.eu facebook.com/MTXEuropetwitter.com/MTXEurope
In the Box
Specifications
Connections
Thank You !
Thank you for purchasing the MTX iWa225 high-end, high-definition audio amplifier. The iWa225 is designed to deliver a deeper dimension
that brings your music to life. No other system provides the exacting measure of clarity in such a small unit. Whether you are listening from
your iPad, iPhone, iPod or computer, the iWa225 delivers outstanding sound quality. Congratulations for making a smart choice and enjoy
the ultimate audio experience with MTX.
1. RCA Inputs - These RCA inputs are used with your external
music source. MTX recommends only high quality RCA cables to
decrease the possibility of radiated noise entering the system.
2. Bluetooth antenna connector - Connect the provided an-
tenna. Note the BT input will not work properly without the
antenna. It also requires that the IR receiver and IR remote
control are in sight.
3. IR (Infra red receiver connector - Connect the provided IR
sensor. Note that without IR sensor, the remote control will not
be functional.
4. Speakers connectors - Connect your 4Ω or speakers to it.
Be carefull with the polarities. Reverse polarity strongly de-
grades the level of serious and sound quality.
5. Power supply connector - use the provided power cord
and connect it to a 110V or 220V wall plug. You don’t need to
change any setting.
1x iWa225 amp with its built in power supply
1x Bluetooth antenna
1x Power cable
1x IR (Infra red) receiver
1x Remote control
1x This owner’s manual
• Power : 2x25W RMS @4Ω 0,1%THD+N or 2x13W RMS @8Ω 0,1%THD+N
• Compatible load : 4Ω to 8Ω
• Inputs : Bluetooth and Aux (RCA)
• Remote : IR receiver with 100cm cable
• Power supply : 100~120V - 200~240V, 50 - 60Hz
• Dimensions : 8x20x8cm
Weight : 920g (amp only)


Produkt Specifikationer

Mærke: MTX Audio
Kategori: Ikke kategoriseret
Model: iWa225

Har du brug for hjælp?

Hvis du har brug for hjælp til MTX Audio iWa225 stil et spørgsmål nedenfor, og andre brugere vil svare dig