Mustek PowerMust 848 Manual

Mustek Diverse PowerMust 848

Læs gratis den danske manual til Mustek PowerMust 848 (28 sider) i kategorien Diverse. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Mustek PowerMust 848, eller vil du spørge andre brugere om produktet?

Side 1/28
6. Усунення несправностей
Для вирішення незначних несправностей див. таблицю нижче.
Проблема Можлива причина Рішення
Акумулятор розряджений Заряджайте ДБЖ упродовж щонайменше
8 годин.
Несправність акумулятора.Замініть на акумулятор такого ж типу.
На передній панелі не
світиться жоден
індикатор.
ДБЖ не увімкнено. Натисніть вимикач живлення для
увімкнення ДБЖ.
ДБЖ перенавантажено. Відключіть від ДБЖ частину підключених
пристроїв. Перш ніж знову підключати
устаткування, упевніться, що
навантаження відповідає потужності ДБЖ,
зазначеній у технічних характеристиках.
Постійно звучить
сигнал попередження,
проте з живленням
все в порядку.
Несправність ДБЖ Поверніть прилад до сервісного центру.
Акумулятор пошкоджений. Замініть на акумулятор такого ж типу. Сигнал звучить кожні 2
секунди, проте з
постачанням живленням
все в порядку.
Пошкоджено плату
зарядження. Поверніть прилад до сервісного центру.
ДБЖ перенавантажено. Відключіть від
Д
БЖ найменш критичні
пристрої.
Напруга акумулятора є дуже
низькою.
Заряджайте ДБЖ упродовж щонайменше
8 годин.
При порушенні
постачання живлення час
аварійного живлення
дуже короткий.
Акумулятор пошкоджений.
Можлива причина, це
неправильне використання
або ж використання у
середовищі з високою
температурою.
Замініть на акумулятор такого ж типу.
Постачання живлення в
порядку , проте блимає
світлодіод.
Відійшов шнур живлення. Підключіть шнур живлення належним
чином.
7 Технічні характеристики
Модель PowerMust 424
Offline
PowerMust 636
Offline
PowerMust 848
Offline
ПОТУЖНІСТЬ 400 ВA / 240 Вт 600 ВA / 360 Вт 800 ВA / 480 Вт
ВХІДНІ ХАРАКТЕРИСТИКИ
Напруга 220/230/240 В перемінного струму
Діапазон напруги 180~270 В змінного струму
Частота 50 Гц
Вихідні характеристики
Регулювання напруги +/-10%
Час передачі Нормально 2-6 мс
Форма коливання Синусоїдна
АКУМУЛЯТОР
Тип і номер 12 В/4,5 Aг x 1 12 В/7 Aг x 1 12 В/9 Aг x 1
Час зарядження 8 годин для зарядження на 90%
ФІЗИЧНІ ХАРАКТЕРИСТИКИ
Габарити (Д х Ш х В) 228 x 82,5 x 207 мм (при вертикальному розташування)
Вага нетто (кг) 2,2 2,7 3,1
Операційне середовище
Вологість 0-90 %
Температура 0-40°C (без конденсації)
1. Package Contents
You should have received the following items inside of package:
- UPS Unit
- User manual
- AC Input Power cable
- Warranty card & Service Information
2. Product Introduction
The Nano UPS provides comprehensive protection in a small and economic package. The
UPS is more compact and offers greater comprehensive power protection against surges
and spikes. This UPS will continue providing stable power to connected equipment and
enable to shutdown PC safely during power failure. Its embedded microprocessor controller
guarantees high reliability and it’s perfect for any home or small office application.
3. Product Overview
Front View:
Back View:
PowerMust 424/636/848 Offline series User manual
Version. 1.0
X Power Switch
Y UPS status indicator
Z Fault/Battery status indicator
(Check the Indicator & Alarm Table for the details.)
X AC input with Fuse
Y Output receptacles
UA EN
8 hours
CAUTION: NEVER connect a laser printer or scanner to the UPS unit. This may cause the
damage of the unit.
4. Installation and Initial Startup
NOTE: Before installation, please inspect the unit. Be sure that nothing inside
the package is damaged.
Placement & Storage Conditions
Install the UPS in a protected area that is free of excessive dust and has adequate air flow.
Please place the UPS away from other units at least 20 cm to avoid interference. Do NOT
operate the UPS where the temperature and humidity is outside the specific limits.
(Please check the specs for the limitations.)
Connect to Utility and Charging
Before initial use, please plug in the AC input cord to the wall
outlet and turn on the UPS for charging. For the best results,
suggest to charge the battery at least 8 hours before initial use.
Connect the Loads
Plug in the loads to output receptacles on the rear panel of the
UPS. Simply turn on the power switch of UPS unit, then devices
connected to the UPS will be protected by UPS unit.
Turn On/Off the Unit
Turn on the UPS unit by pressing the power switch. Turn off the UPS unit by pressing
again the power switch.
Indicators & Alarm Table for Operation
Conditions Visual Indicator Alarm
AC Mode Green LED lighting Off
Battery Mode Green LED flashing every 10
seconds Sounding every 10
seconds
Low battery at battery
mode Green LED flashing every second
and Red LED lighting Sounding every second
Fault Red LED lighting Continuously sounding
Alarm for
over-temperature
protection
Red LED flashing every 0.5
seconds Off
5. Important Safety Warning (SAVE THESE INSTRUCTIONS)
CAUTION! To prevent the risk of fire or electric shock, install in a temperature and
humidity controlled indoor area free of conductive contaminants. (See the specifications for
the acceptable temperature and humidity range.)
CAUTION! To reduce the risk of overheating the UPS, do not cover the UPS' cooling vents
and avoid exposing the unit to direct sunlight or installing the unit near heat emitting
appliances such as space heaters or furnaces.
CAUTION! Do not attach non-computer-related items, such as medical equipment,
life-support equipment, microwave ovens, or vacuum cleaners to UPS.
CAUTION! Do not plug the UPS input into its own output.
CAUTION! Do not allow liquids or any foreign object to enter the UPS. Do not place
beverages or any other liquid-containing vessels on or near the unit.
CAUTION! In the event of an emergency, press the OFF button and disconnect the power
cord from the AC power supply to properly disable the UPS.
CAUTION! Do not attach a power strip or surge suppressor to the UPS.
CAUTION! If the UPS is with metal chassis, for safety purpose, grounding is a must during
UPS installation in order to reduce leakage current below 3.5A.
Attention hazardous through electric shock. Also with disconnection of this unit from the
mains, hazardous voltage still may be accessible through supply from battery. The battery
supply should be therefore disconnected in the plus and minus pole at the quick connectors
of the battery when maintenance or service work inside the UPS is necessary.
CAUTION! Servicing of batteries should be performed or supervised by personnel
knowledgeable of batteries and the required precautions. Keep unauthorized personnel
away from batteries.
CAUTION! When replacing the batteries, use the same number and type of batteries.
CAUTION! Internal battery voltage is 12VDC. Sealed, lead-acid, 6-cell battery.
CAUTION! Do not dispose of batteries in a fire. The battery may explode. Do not open or
mutilate the battery or batteries. Released electrolyte is harmful to the skin and eyes.
CAUTION! Unplug the UPS prior to cleaning and do not use liquid or spray detergent.
CAUTION! A battery can present a risk of electric shock and high short circuit current. The
following precaution should be observed before replacing batteries:
1) Remove watches, rings, or other metal objects.
2) Use tools with insulated handles.
3) Wear rubber gloves and boots.
4) Do not lay tools or metal parts on top of batteries.
5) Disconnect charging source prior to connecting or disconnecting batteries terminal.
EN EN


Produkt Specifikationer

Mærke: Mustek
Kategori: Diverse
Model: PowerMust 848

Har du brug for hjælp?

Hvis du har brug for hjælp til Mustek PowerMust 848 stil et spørgsmål nedenfor, og andre brugere vil svare dig