© MuxLab Inc. 94-000929-A SE-000929-A
2321 Rue Cohen, Montreal, Quebec, Canada. H4R 2N7
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: info@muxlab.com URL: www.muxlab.com
Specifications
HDMI, VGA and USB connectivity.
Blu-Ray, projectors, monitors, TV, PC, laptops, servers, and Smart White Boards.
HDMI 2.0b (4K/30 4:4:4 & 4K/60 4:2:0), VGA (1920x1200), USB 2.0 and HDCP 2.2.
Connectors
Note: Cables not included.
One (1) HDMI receptacle.
One (1) Female DB15 connector for VGA.
One (1) USB Type B connector.
One (1) RJ45S for Ethernet connectivity.
One (1) 3.5mm jack for Audio-In.
One (1) 2.1mm jack for power.
Maximum Distance
Based on a maximum
length of 6.6ft (2m) of
HDMI cable per end.
Cat5e/6: 330ft (100m)
Note: When installed in an electrically noisy environment, an STP cable must be used. Also,
cross-connection reduces the effective distance depending on the grade of twisted cable used.
Typical one (1) frame (16ms)
1 Gig Ethernet with IGMP, Jumbo Frames and PoE
RJ45 Pin Configuration
Reverse Polarity Sensitive.
Use EIA/TIA 568A or 586B
straight-through wiring.
RJ45 Link
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
This device supports PoE (PD), an external power supply is not included. It is intended to be
powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may
be purchased separately.
Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
4.53” x 4.53” x 2.05” (115mm x 115mm x 52mm)
Regulatory: FCC, CE, RoHS Flammability: 94V0
500777-TX-DECO HDMI/VGA/USB over IP PoE Wall Plate Transmitter, 4K/30, DECO
500759-RX, 500770-RX, 500771-RX, and 500777-RX
Accessories
(This item is sold
separately)
500993 Universal Locking Power Supply 5VDC/2.6A US/UK/EU Blade
HDMI/VGA/USB over IP PoE Wall Plate Transmitter, 4K/30, DECO
500777-TX-DECO
Quick Installation Guide
Overview
The HDMI/VGA over IP PoE Wall Plate Transmitter, 4K/30, DECO fits a standard 2-gang Decora
size electrical box and allows HDMI, VGA and USB equipment to be connected up to 330ft
(100m), with video supported at up to 4K (3840x2160) resolution @ 30Hz via one (1) Cat5e/6
unshielded twisted pair cable in a point-to-point configuration. The USB port may be used for
extending various USB devices including Smart Boards. Point-to-multipoint and multipoint-to-
multipoint configurations are also possible by connecting several Transmitters and Receivers to the
same local Ethernet IP network via an Ethernet Switch. The HDMI/VGA/USB over IP PoE Wall
Plate Transmitter, 4K/30, DECO also supports PoE (PD) if used with a PoE (PSE) Ethernet
Switch. Additional Transmitters may be purchased separately depending on the intended
application and number of units required.
For the point-to-multipoint and multipoint-to-multipoint configuration the Ethernet Switch must
have Gigabit ports, Jumbo Frame capability, DHCP Server capability, PoE, and additionally
support the IGMP communication protocol for the multipoint-to-multipoint case. MuxLab
recommends using the Cisco SG350 or SG550 Series Managed Switches.
The MuxLab ProDigital Network Controller is available to simplify the configuration and
utilization of the 500777-TX-DECO and other MuxLab IP based products via an Ethernet web
interface. The MuxControl Android and iOS Application may also be used for connectivity
management, in combination with the Network Controller.
Applications
Applications include commercial and residential AV systems, classroom systems, digital signage,
boardroom systems, conference rooms, and collaborative PC systems.
