Nameek's Derin531 Manual

Nameek's Vægskab Derin531

Læs gratis den danske manual til Nameek's Derin531 (5 sider) i kategorien Vægskab. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Nameek's Derin531, eller vil du spørge andre brugere om produktet?

Side 1/5
x2
x2
x2
Nuts
Insulation
Sleeve
Hanger
Bolts
(8mm)
Washer
x2
x2
1
Included Sink Installation Hardware
Vanity Installation Hardware
Tools You May Need
Following these mounting instructions with the hardware included will be more than
sufficient to support vanity installation.
Level
Tape
Measure
Drill
Hammer
Phillips
Screwdriver
Caulk
x1
Mounting
Bracket
Set
x4
x4
Long
Screw
x4
Short
Screw
Wall
Anchor
Installation Instructions
Derin Collection
1. Prepare Location
Locate studs in the wall. If the
studs do not line up with the
holes in the back of the sink and
vanity, be sure to add sufficient
wall supports behind the finished
wall.
2. Mount Vanity
Bracket
Mark the desired height of the
vanity on the wall. Mark the
location of the vanity. Drill pilot
holes and install the mounting
brackets. Check position with a
level.
2
2 x
2 x


Produkt Specifikationer

Mærke: Nameek's
Kategori: Vægskab
Model: Derin531

Har du brug for hjælp?

Hvis du har brug for hjælp til Nameek's Derin531 stil et spørgsmål nedenfor, og andre brugere vil svare dig