Naxa NSH-3000 Manual

Naxa Overvågningskamera NSH-3000

Læs gratis den danske manual til Naxa NSH-3000 (1 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Naxa NSH-3000, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

User Manual

Thank you for using the Wi-Fi Smart Camera

Wi-Fi Smart Camera

NSH-3000

Reset Button: Press a small object into the “Reset” hole on the back of the

device and hold for 5 seconds. A voice prompt will state “Reset camera

successfully” when properly completed.

It is recommended that you insert an 8-64GB high-speed Micro SD card.

Otherwise, the camera will not be able to store, view old video, or support

important functions, such as ﬁrmware upgrading.

Speciﬁcations

Getting Started

Wi-Fi Smart Camera

NSH-3000

Install the Smart Life App

Download the Smart Life App: Access the Smart Life app from your Google Play /

Apple App Store or scan the QR code below to download and install.

and log in.

Please make sure that there is an available Wi-Fi network and that you are

connected to the internet.

Find the USB port on the bottom of the smart camera and insert the power

cord to turn on the device.

Then go to the Smart Life app home page and click “ADD DEVICES” on the

main screen. Choose “Security camera”.

Select the “QR Code” in the upper right corner of the screen. Click conﬁrm

and proceed according to the prompts on your mobile phone.

Video Browsing in the Smart Life App

7. Important Reminders

• Avoid contact with sharp objects,

• Avoid placing on furniture or places where it might fall.

•Avoid tangling the wires, and keep them tucked away from the

camera to avoid tripping hazards and pinching.

• Ensure that the camera is within coverage range of the wireless Wi-Fi

signals.

• When switching to a new network environment: Reset the camera via

the reset hole on the back, by inserting a small object and holding the

reset button for about 5 seconds. A voice prompt will state “Reset

camera successfully”. Then you may connect to the new network.

User Manual

5. App Interface

1. Click the to enable the microphone function. By holding the

speaker button down, you can communicate with the people/pets

that you see on screen with the camera. Click when the

listening functionality is on and you can hear audio from the

camera end.

2. Click to adjust the camera.

3. Click or to start recording or take a screenshot (ﬁles recorded

in mobile phone).

4. Click to view the motion sensor and alerts settings. (Three

sensitivity options: Low, Medium, High.)

5. Click to view in full-screen mode.

6. Image-quality adjustment: Two modes, SD and HD).

7. Recording and playback: You can watch the recorded videos on the

local disc and SD card.

8. Alarm notiﬁcation and triggered screenshot can be viewed in the

message center.

6. More Settings

1. Click to view more settings.

2. Device Sharing: Share the device to multiple users with the Smart

Life app (only the admin account is allowed to change the settings).

3. Device info: IP address, device ID, timezone, and Wi-Fi signal (6.2).

4. Basic features settings: Set ﬂip and time stamp.

5. SD card settings: Check the status of the SD card and set

recording and alarm mode.

8. Support

If you have problems with your device, please consult the instructions in

this manual. Please also visit us on the web at ww.naxa.com to get daily

news, alerts, and documentation for your device. For additional

assistance, please contact Naxa Technical Support.

NAXA Technical Support

2320 East 49th St.

Vernon, CA 90058

http://www.naxa.com/supportcenter/

8. FCC Notice

This device complies with part 15 of the FCC Rules. Operationi ssubject to

the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

9. Trademark & Regulatory Statements

The Smart Life App and all Smart Life Features are a trademark of Tuya,

LLC.

Google Play™ store and all Google Brand Features are trademarks of

Google Inc., LLC.

Apple App Store™ and all Apple Brand Features are registered

trademarks or trademarks of Apple Inc.

Produkt Specifikationer

Mærke:	Naxa
Kategori:	Overvågningskamera
Model:	NSH-3000

Har du brug for hjælp?

Hvis du har brug for hjælp til Naxa NSH-3000 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Overvågningskamera Naxa Manualer

Naxa NSH-3000 Manual

12 August 2024

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

1 August 2025

31 Juli 2025

31 Juli 2025

31 Juli 2025

FLIR ioi HD CB-5222 Manual

30 Juli 2025

Eufy Cam S3 Pro Manual

30 Juli 2025

Telycam Vision+ 4KN 30X Manual

30 Juli 2025

Marshall Electronics CV630-BI Manual

30 Juli 2025

Telycam Vision+ SE Manual

30 Juli 2025

FLIR Ariel CC-3405 Manual

29 Juli 2025