NEC MultiSync ME651 Manual

NEC overvåge MultiSync ME651

Læs gratis den danske manual til NEC MultiSync ME651 (5 sider) i kategorien overvåge. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om NEC MultiSync ME651, eller vil du spørge andre brugere om produktet?

Side 1/5
Quick Start Guide
AirServer® Embedded Screen Mirroring Solution
1. e Installing th MPi4 Kit AirServer
For installation and usage instructions of the MPi4 Kit AirServer, refer to the setup guide of the Raspberry Pi Compute Module 4.
https://assets.sharpnecdisplays.us/documents/installationguides/nec_raspberry_pi_compute_module4_setup_guide.pdf
2. Connections
Plug in an Ethernet cable to the LAN port of the MPi4 Kit AirServer.
NOTE recommend Ethernet: AirServer works using Wi-Fi or without network connectivity, but we for optimal performance.
3. Turn on the NEC display and select the correct source
Once the display is turned on select the source COMPUTE MODULE on the remote control. There the AirServer Quick Setup screen will ,
be displayed.
4. AirServer Quick Setup
To start the configuration, follow the on-screen instructions.
If the AirServer Raspberry Pi Compute Module 4 (MPi4 Kit AirServer) is connected to a network using an Ethernet cable, Quick Setup can
be done through a web browser on a computer or mobile device on the same network. Type in the IP address shown in the instructions and
at the bottom left of the homescreen. Once the Device Management page has loaded, type in the setup PIN to get started.


Produkt Specifikationer

Mærke: NEC
Kategori: overvåge
Model: MultiSync ME651

Har du brug for hjælp?

Hvis du har brug for hjælp til NEC MultiSync ME651 stil et spørgsmål nedenfor, og andre brugere vil svare dig




overvåge NEC Manualer

overvåge Manualer

Nyeste overvåge Manualer