NEC NC1500C Manual

NEC Beamer NC1500C

Læs gratis den danske manual til NEC NC1500C (62 sider) i kategorien Beamer. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om NEC NC1500C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/62

NC1500C

User’s Manual

DLP Cinema® Projector

NEC Viewtechnology, Ltd.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT

EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO

NOT USE THIS UNIT’S POLARIZED PLUG WITH AN

EXTENSION CORD RECEPTACLE OR OTHER OUTLETS,

UNLESS THE PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE

HIGH-VOLTAGE COMPONENTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT OPEN COVER. NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

This symbol warns the user that uninsulated

voltage within the unit may have sufficient

magnitude to cause electric shock. Therefore,

it is dangerous to make any kind of contact

with any part inside of this unit.

This symbol alerts the user that important

literature concerning the operation and

maintenance of this unit has been included.

Therefore, it should be read carefully in order

to avoid any problems.

DOC compliance Notice

This Class A digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

Precautions: Please read this manual carefully before using your

NC1500C and keep the manual handy for future reference.

WARNING

This is a Class A product. In a domestic environment this

product may cause radio interference in which case the user

may be required to take adequate measures.

CAUTION

• In order to reduce any interference with radio and television

reception use a signal cable with ferrite core attached.

Use of signal cables without a ferrite core attached may

cause interference with radio and television reception.

• This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference when the equipment is operated in a

commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the installation

manual, may cause harmful interference to radio

communications.

Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will

be required to correct the interference at his own expense.

Important Safeguards

These safety instructions are to ensure the long life of your

projector and to prevent fire and shock. Please read them

carefully and heed all warnings.

Installation

1. Place the projector on a flat, level surface in a dry area

away from dust and moisture. Tilting the front of the

projector up or down from level could reduce lamp life.

Do not put the projector on its side when the lamp is on.

Doing so may cause damage to the projector.

2. Do not place the projector in direct sunlight, near heaters

or heat radiating appliances.

3. Exposure to direct sunlight, smoke or steam could harm

internal components.

4. Handle your projector carefully. Dropping or jarring your

projector could damage internal components.

5. To carry the projector, a minimum of six persons are

required.

Do not hold the lens part and the anamorphic lens part

with your hand. Otherwise the projector may tumble or

drop, causing personal injury.

6. Do not place heavy objects on top of the projector.

Power Supply

1. The projector is so designed that it operates with the

power supply voltage described below.

• AC200-240V 50/60Hz

Ensure that your power supply fits this requirement before

attempting to use your projector.

2. Consult your dealer for installing the power cord to the

projector. DO NOT install the power cord by yourself.

Doing so may cause a fire or electric shock.

3. Handle the power cord carefully and avoid excessive

bending. Do not place any heavy objects on the power

cord. A damaged cord can cause electric shock or fire.

4. If the projector will not be used for an extended period of

time, shut down AC power.

5. Placing the power cord and the signal cable closely to

each other can cause beat noise. If this happens, keep

the two separated so that beat noise is not generated.

Beat noise is corruption of the picture often seen as a

rolling band moving through the image.

6. Do not touch the projector during a thunder storm. Doing

so can cause electrical shock or fire.

Cleaning

1. Unplug the projector before cleaning.

2. Clean the cabinet periodically with a damp cloth. If heavily

soiled, use a mild detergent. Never use strong detergents

or solvents such as alcohol or thinner.

3. Use a blower or lens paper to clean the lens, and be

careful not to scratch or mar the lens.

E-1

Important Information

Produkt Specifikationer

Mærke:	NEC
Kategori:	Beamer
Model:	NC1500C

Har du brug for hjælp?

Hvis du har brug for hjælp til NEC NC1500C stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Beamer NEC Manualer

NEC NC2043ML Manual

12 Januar 2025

NEC NP-NC1503L Manual

18 December 2024

10 Oktober 2024

4 Oktober 2024

21 September 2024

14 September 2024

14 September 2024

1 September 2024

NEC NP-PA1705UL Manual

26 August 2024

NEC MT860 Manual

24 August 2024

Beamer Manualer

Nyeste Beamer Manualer

Hisense 100L5ND Manual

2 April 2025

Philips NeoPix 130 Smart Manual

5 Marts 2025

Philips NeoPix 200 NPX200 Manual

5 Marts 2025

Sharp XP-P601Q Manual

20 Februar 2025

InFocus Genesis IN0026ST Manual

20 Februar 2025

20 Februar 2025

30 Januar 2025

30 Januar 2025

30 Januar 2025

Acer Vero PL3515ATV Manual

30 Januar 2025