Netgear ANT24BNA Manual

Netgear Ikke kategoriseret ANT24BNA

Læs gratis den danske manual til Netgear ANT24BNA (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Netgear ANT24BNA, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
N E T G E AR W i r e l e s s L AN An t e n n a s a n d A c c e s s o r i e s
NETGEAR 18 dBi Patch Panel Directional Antenna - ANT24D18
NETGEAR 9 dBi Omni-directional Antenna - ANT2409
NETGEAR 5 dBi Omni-directional Antenna - ANT24O5
NETGEAR 500 mW Power Booster - ANT24BNA (part of ME103BDL1NA bundle)
NETGEAR Power Injector - ANT24BDC
NETGEAR Antenna Cables
NOTE: To obtain optimal results in
extending wireless range with antenna
installations, it is recommended that a
qualified, professional installer is consulted
for site survey and proper installation.
O p t i m i z e W L A N R a n g e a n d P o w e r
NETGEAR’s line of antennas and accessories for 802.11b and 802.11g devices give you multiple
options for maximizing the reach and performance of your wireless infrastructure devices. Every
WLAN deployment is unique. When planning a network that incorporates wireless, varying facility
sizes, construction materials, distance between transmission points and physical obstructions must
be accounted for. With both directional and omni-directional antennas, low-loss cables, mounting
hardware, and other accessories, installers can customize a value-priced wireless solution that meets
the requirements of even the most challenging applications. All NETGEAR antennas are FCC-approved
to work with the following NETGEAR models: FVM318, FWG114P, ME103 and WG302.
18 dBi Patch Panel Directional Antenna
The ANT24D18 indoor/outdoor directional* antenna provides a 3-in-1 solution for mixed applications in combination
with an 802.11b or 802.11g access point or wireless router. One, it delivers extended access point range in a single floor
environment ideally positioned in the corner of a building. Two, it functions point-to-point so that you can wirelessly
connect LANs between buildings in a campus-type environment. Three, it provides multifloor transmission when placed
on a ceiling, as the higher power output extends the range through typical flooring materials. Includes several mounting
options (fixed wall, wall adjustable, and pole), cable sold separately.
*Directional: Concentrates transmit and receive radio-frequency energy into a cone, or beam, for higher signal strength and reception in a
single direction.
9 dBi Indoor/Outdoor Omni-directional Antenna
The ANT2409 indoor/outdoor antenna provides extended point-to multi-point coverage for wireless 802.11b or 802.11g
devices. Optimal for medium range indoor or outdoor point-to-multi-point applications. Included lightning arrestor
(a $90 value) helps prevent damage due to lightning-induced surges or static electricity in outdoor applications. Typically
hung from crossbars of drop ceilings or on a rooftop, the waterproof and UV resistant ANT2409 includes wall and pole
mounting materials for installation ease, antenna cable and grounding cable not included.
5 dBi Omni-directional Antenna
The ANT24O5 indoor omni-directional** antenna is designed to extend coverage of wireless 802.11b or 802.11g devices.
This antenna is especially useful in optimizing coverage when you want to place your wireless access point or router out of
plain view – in a wiring closet or above a ceiling pad. Locate this antenna at the top of a cubicle, on a ceiling, desktop or
wall, where it is more receptive to radio signals. Ideal placement is on a wall, 2 m high, or on the ceiling facing the area to
cover. Includes mounting brackets, cable sold separately.***
** Omni-directional: Radiates radio-frequency energy equally in all directions for widespread, all-points deployment.
***NETGEAR recommends use of antenna cable up to 5 m long with the ANT24O5 antenna.
500 mW Power Booster****
The 500-milliwatt bi-directional power booster increases the transmission signal from an average 50 mW to 500 mW
and amplifies the signal by 10 dB (10 times) in receive mode. It is used to enable a single access point device to cover a
larger area. Consisting of a bi-directional amplifier, 500 mW (+27 dBm) in transmit mode for +5 to +15 dBm input, it
provides 10 dB gain in receive mode. It can also be used to fully compensate for the loss of long antenna cables without
any reduction of performance, and permits one to position an antenna at a greater distance from a wireless node. Used in
conjunction with a high gain antenna, such as the 18 dBi ANT24D18, it can provide very high outdoor range – up to 120
km or about 74 miles. Easy to install, no configuration required; includes ceiling/wall mount bracket, cable sold separately.
**** NETGEAR has approved this product for use in the United States only. As per FCC regulations, the ANT24BNA booster is sold
as part of a transmission system which includes the ME103 802.11b ProSafe Wireless Access Point and the NETGEAR 3m cable
(ACC-10314-02). This product may only be ordered as part of a bundle p/n: ME103BDL1NA. Use of the ANT24BNA with any other
products is strictly prohibited by FCC regulations. Netgear expressly disclaims the implied warranty of merchantability and fitness for a
particular purpose for any damage caused by misuse of the ANT24BNA.
Power Injector for the 500 mW Booster
An optional accessory for the 500 mW booster, the ANT24BDC power injector provides power through the antenna cable to the
booster. Use this device when the booster is not located near a power outlet. Installed between the access point and the booster, this
device injects up to 12 volts and 2 amps to the booster. The antenna cable from the access point to the injector can be up to 3 m in
length. The cable between the injector and the booster can be up to 10 m long to achieve maximum performance benefits.
Low-loss Antenna Cables
These 1.5 m, 3 m, 5 m, and 10 m antenna cables offer low loss at 2.4 GHz and added flexibility for setting up access points at a greater
distance from a power source. They come with reverse SMA connectors and provide a standard connection optimized for use with
NETGEAR‘s line of WLAN antennas, and Booster/Power Injector products (range can be drastically reduced if longer or higher loss
cables than these are used.)
18 d Bi Pat c h Pan e l Dir e ct io n al A nt e n n a - A N T2 4D1 8
Technical Specifications
Description: 18 dBi Patch Panel Directional Antenna with reverse N female
jack and reverse N to reverse SMA adapter
Typical Application: Indoor/outdoor long range point-to-point connections
Maximum Outdoor Range1: 15.8 km (~9.8 miles)
Frequency Range: 2.400 ~ 2.485 MHz
Gain2:18 dBi
Beam Width: Horizontal 60°
Vertical 30°
Dimensions: 262.8 x 262.8 x 40 mm (10.35 x 10.35 x 1.58 in)
Weight: 1520 g/3.35 lbs.
Package Contents: - 18 dBi Patch Panel Directional Antenna - ANT24D18
(cable required, sold separately)
- Wall and ceiling mount brackets and hanging materials
- One reverse N type to reverse SMA adapter
- Installation guide
- Warranty/Support information card
Warranty: NETGEAR 2-year warranty
1 Range estimation is based on two wireless nodes each with an ANT24D18 antenna attached, associating with each other at 11 Mbps
under ideal line-of-sight conditions.
2 Gain: A ratio of decibels to an isotropic antenna that is commonly used to measure antenna coverage.
9 dB i I n do o r/ Ou t d oo r O mn i- d ir e c t io na l
An t e n n a - A NT 24 09
Technical Specifications
Description: 9 dBi Omni-directional Antenna with reverse N female connector
Typical Application: Indoor/outdoor medium range point-to-multipoint connections
Frequency Range: 2400 ~ 2485 MHz
Gain2:9 dBi
Polarization: Vertical
Operating Temperature: -30 to 80º C (-22 to 176º F)
Weight: .9 kg/2 lbs.
Package Contents: - Indoor/Outdoor 9 dBi Omni-directional Antenna ANT2409
- Lightning Arrestor
- 2 meter low loss antenna cable (to connect antenna to the lightning arrestor)
- Wall and pole mounting brackets and hanging materials
- One reverse N/SMA Adapter
- Installation guide
- Warranty/Support information card
Warranty: NETGEAR 2-year warrranty

Produkt Specifikationer

Mærke: Netgear
Kategori: Ikke kategoriseret
Model: ANT24BNA

Har du brug for hjælp?

Hvis du har brug for hjælp til Netgear ANT24BNA stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Netgear Manualer

Netgear

Netgear Nighthawk A9000 Manual

25 Juli 2025
Netgear

Netgear PL1000-100PES Manual

9 Juli 2025
Netgear

Netgear M4300-24X24F Manual

7 Juli 2025
Netgear

Netgear APS1000W Manual

26 Juni 2025
Netgear

Netgear GS116v3 Manual

17 Juni 2025
Netgear

Netgear GS728TXUPv3 Manual

17 Juni 2025
Netgear

Netgear GS108EPP Manual

7 Juni 2025
Netgear

Netgear GS105EPP Manual

7 Juni 2025
Netgear

Netgear GS105EP Manual

7 Juni 2025
Netgear

Netgear GS108EP Manual

6 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech

Advantech EAI-3100 Manual

30 Juli 2025
Deye

Deye SUN-M180G4-EU-Q0-I Manual

30 Juli 2025
Crestron

Crestron STIRP Manual

30 Juli 2025
Intellinet

Intellinet 790741 Manual

30 Juli 2025
Saris

Saris Edge 2-Bike Manual

30 Juli 2025
Advantech

Advantech ROM-3310 Manual

30 Juli 2025
Advantech

Advantech EKI-1751I Manual

30 Juli 2025
Advantech

Advantech ICR-1601W Manual

30 Juli 2025
C2G

C2G 29341 Manual

30 Juli 2025
Advantech

Advantech ITA-8120 Manual

30 Juli 2025