Netgear GS748Tv6 Manual

Netgear Ikke kategoriseret GS748Tv6

Læs gratis den danske manual til Netgear GS748Tv6 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Netgear GS748Tv6, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Installation Guide

24-Port Gigabit Ethernet Smart Switch with 2

Dedicated SFP Ports

GS724Tv6

Step 1. Connect the switch

A1: Use the NETGEAR Insight app to discover and register the switch

1. If you did not yet install the Insight app, visit the app store on your mobile device,

search for NETGEAR Insight, and download the Insight app.

2. Open the Insight app, enter the email address and password for your NETGEAR

account, and tap .LOG IN

3. Use one of the following methods to add and discover the switch:

• Method 1: Your switch and mobile device are connected to the same network

Your switch and its IP address display in the Devices list. Do the following:

a. Select the switch or tap .Unclaimed

b. On the next screen, tap .ADD DEVICE

1. Connect devices to the RJ-45 Gigabit ports on the switch front panel.

Use Category 5e (Cat 5e) or higher rated Ethernet cables terminated with RJ-45

connectors to make connections.

2. Connect one port on the switch to a network that includes a DHCP server such as a

router.

NOTE: Inasmallofceorhomeofcenetwork,connecttheswitchtotheLANport

of a router that is connected to a modem, or to a gateway.

To use an SFP port, you must insert an SFP transceiver module, which you can

purchase from NETGEAR

3. Power on the switch and wait three minutes.

If you connected the switch to a network with a DHCP server, the switch is

automatically assigned a new IP address. (The default switch IP address is

192.168.0.239.)

Package contents

• Switch model GS724Tv6 or GS748Tv6

• Power cord (varies by region)

• Rack-mount kit and rubber feet

• Installation Guide

This switch is designed for indoor use only. If you want to connect it to a device located

outdoors, the outdoor device must be properly grounded and surge protected, and

you must install an Ethernet surge protector inline between the switch and the outdoor

device. Failure to do so can damage the switch.

December 2023

WARNING: Before connecting this switch to outdoor cables or devices, see

https://kb.netgear.com/000057103 for safety and warranty information.

Sample connections

48-Port Gigabit Ethernet Smart Switch With 2

Copper/SFP Combo Ports and 2 Dedicated SFP Ports

GS748Tv6

Step 2: Discover the switch in your network

Use one of two options to discover and manage the switch: Add the switch to a NETGEAR

Insight managed network, or set it up as a locally managed standalone switch. Follow the

procedure for your preferred network setup.

Insight setup

Option A: Use the NETGEAR Insight app

Insight subscribers can use the Insight app for onsite discovery.

Standalone setup

Option B: Use the NETGEAR Switch Discovery Tool

Use the NETGEAR Switch Discovery Tool.

Option A: Use the NETGEAR Insight app

This procedure assumes that you are already a NETGEAR Insight subscriber and want to

add the switch to an Insight managed network behind a router.

You can use the Insight app on a mobile device and scan the QR code or bar code to add

the switch to Insight, or use the Insight Cloud Portal to manually enter the switch’s serial

number and MAC address. This procedure describes how to use the Insight app.

After you discover and add the switch to the Netgear Insight app, we recommend that

you connect a computer directly to the switch or to the network on which you installed the

switch to complete set up. If you connect an access point to the switch, you can also use a

tablet to connect to the switch.

A2: Change the switch management mode to NETGEAR Insight

By default, the management mode of the switch is set to Directly Connect to Web Browser

Interface, which lets you manage the switch from its device user interface (UI). To manage

the switch remotely from the cloud with the NETGEAR Insight Cloud Portal or Insight app,

you must change the management mode in the device UI.

1. Open a web browser from a computer or tablet connected to the same network as

your switch.

You can use a wired or WiFi connection.

2. Intheaddresseldofyourwebbrowser,typetheIPaddressoftheswitch.

The switch IP address displays in the Devices list of the Insight app (see

A1: Use the NETGEAR Insight app to discover and register the switch).

Because you already registered the switch with NETGEAR, the device UI login page

displays.

3. Enter the default device admin password, which is , and click the password Login

button.

If you already added the switch to an Insight network location, enter the Insight

network password for the network location.

4. IftheChangeDefaultPasswordpagedisplays,setandconrmanewdeviceadmin

password, click the button, and log in again using your new password Apply

The System Information page displays.

Continue on the next page

CAUTION: If you add the switch to Insight before connecting it to power for the

rsttime,wait10minutestoallowthedefaultlogincredentialstobereplacedby

the Insight network location credentials.

If the switch does not display in the devices list, tap in the upper-right corner, +

and tap . If the switch still does not display, use Method 2.Scan Network

• Method 2: Your switch and mobile device are not connected to the same

network

Your switch and its IP address do not display in the devices list. Do the following:

a. Tap in the upper-right corner.+

b. Either use the camera on your mobile device to scan the bar code or QR

code, or type in the serial number and MAC address.

4. Followtheonscreenpromptstonishregisteringtheswitch.

5. If you want to manage the switch with NETGEAR Insight, do the following:

At the NETGEAR Insight Cloud Portal or Insightapp prompt, tap Manage with

Insight. Then, continue with

A2: Change the switch management mode to NETGEAR Insight.

Servers

Storage

Desktops

Router

Insight cloud

Internet

Access point

WiFi clients

GS724Tv6 switch

Access point

WiFi clients with

Insight access

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

Support and Community

Visit netgear.com/support to get your questions answered and access the latest

downloads.

You can also check out our NETGEAR Community for helpful advice at

community.netgear.com.

Regulatory and Legal

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français

canadien à netgear.com/support/download/. (If this product is sold in Canada, you can

access this document in Canadian French at netgear.com/support/download/.)

For regulatory compliance information including the EU Declaration of Conformity,

visit netgear.com/about/regulatory/. See the regulatory compliance document before

connecting the power supply.

For NETGEAR’s Privacy Policy, visit

netgear.com/about/privacy-policy.

By using this device, you are agreeing to NETGEAR’s Terms and Conditions at netgear.

com/about/terms-and-conditions. If you do not agree, return the device to your place of

purchase within your return period.

Do not use this device outdoors.

Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz

devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation

ofthisdeviceispermittedinlargeaircraftwhileyingabove10,000feet.Operationof

transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications

with unmanned aircraft systems.

©NETGEAR,Inc.,NETGEARandtheNETGEARLogoaretrademarksofNETGEAR,Inc.

Any non-NETGEAR trademarks are used for reference purposes only.

NETGEAR INTERNATIONAL LTD

Floor 6, Penrose Two,

Penrose Dock, Cork, T23 YY09, Ireland

Option B: Use the NETGEAR Switch Discovery Tool

You can use the NETGEAR Switch Discovery Tool on a Mac or Windows-based computer

connected to the same network as the switch to discover the switch IP address in your

network. To download this tool, visit

netgear.com/support/product/netgear-switch-discovery-tool.aspx.

After discovering the IP address of your switch, continue with

Standalonesetup:LogintotheswitchdeviceUI.

Standalone setup: Log in to the switch device UI

You can use the switch as a plug-and-play device or you can change the settings by

logging in to the device user interface (UI).

1. Open a web browser from a computer or tablet connected to the same network as

your switch. You can use a wired or WiFi connection.

2. Intheaddresseldofyourwebbrowser,typetheswitchIPaddress.

To discover the IP address of the switch, see

Option B: Use the NETGEAR Switch Discovery Tool.

You can also use the NETGEAR Insight app the discover the switch IP address only

(see A1: Use the NETGEAR Insight app to discover and register the switch).

The login page displays

3. Enter the default device admin password, which is , and click the password Login

button.

If you already added the switch to an Insight network location, enter the Insight

network password for the network location.

5. Select the NETGEAR Insight Mobile App and Insight Cloud Portal radio button.

6. In the pop-up window, click the button.OK

7. Click the button.Apply

8. In the pop-up window, click the button.OK

Your settings are saved.

You now must manage the switch using the NETGEAR Insight Cloud Portal or Insight app.

We recommend that you use the Insight Cloud Portal.

NOTE: You can still log in to the device UI and access a limited menu, but instead

of the device admin password, you now must enter the Insight network password

for the Insight network location to which you added the switch.

4. IftheChangeDefaultPasswordpagedisplays,setandconrmanewdeviceadmin

password, click the button, and log in again using your new password.Apply

The System Information page displays. You can now manage the switch.

For more information about managing the switch from the device UI, see the user

manual, which you can download by visiting www.netgear.com/support/download

and entering your model number.

If you did not yet register your switch, we recommend that you visit my.NETGEAR.com,

and register your switch.

Produkt Specifikationer

Mærke:	Netgear
Kategori:	Ikke kategoriseret
Model:	GS748Tv6

Har du brug for hjælp?

Hvis du har brug for hjælp til Netgear GS748Tv6 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Netgear Manualer

Netgear GS748Tv6 Manual

24 August 2025

Netgear GS752TSB Manual

23 August 2025

Netgear GS728TPSB Manual

22 August 2025

Netgear Orbi RBK864S Manual

21 August 2025

Netgear Orbi RBE973S Manual

21 August 2025

Netgear Orbi RBK854 Manual

21 August 2025

Netgear Orbi RBKWM Manual

21 August 2025

Netgear Orbi RBE973SB Manual

21 August 2025

Netgear Orbi RBS860 Manual

20 August 2025

Netgear Orbi RBK866SB Manual

20 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

RGV AF-XXL Manual

24 August 2025

Candy TX60PET 011 Manual

24 August 2025

Deye SUN1000G3-EU-230 Manual

24 August 2025

Deye SUN-4K-G Manual

24 August 2025

Candy HWP 49AMBCR/1-S Manual

24 August 2025

Revitive Pro Health 5572AQ Manual

24 August 2025

Vonroc GS501XX Manual

24 August 2025

Candy NRE H10A2TCBEXSS Manual

24 August 2025

Candy H5WPB69AMBC/1-S Manual

24 August 2025

Vonroc S2_CF501DC Manual

24 August 2025