Netgear AXM752 Manual


Læs gratis den danske manual til Netgear AXM752 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Netgear AXM752, eller vil du spørge andre brugere om produktet?

Side 1/2
)NSTALLATION'UIDE
The 10 Gigabit small form-factor pluggable (XFP) module provides one
full-duplex 10G bps Ethernet link operation on NETGEAR managed
switches.
Due to the automatic detection capability of the switch, installation of
AXM752 only requires that you plug the module into the module slot.
The module can be inserted or removed while the switch is operational.
Insert the module firmly into the slot that supports the XFP interface.
Make sure the optical cable you use is single mode LC to LC duplex
cable.
Release the module latch by pulling down the handle bar across the
module, and pull the module out of the module slot.
Specifications
Standard IEEE 802.3ae
10GBase LR
Dimensions (HxWxD) 0.33” x 0.72” x 3.07”
(85.mm x 18.35mm x 78.0 mm)
Weight 0.1 lb (47g)
Operating Temperature 32- 158 F (0-70c)
Storage Temperature 32-185 F (0-85c)
Operative relative humidity 6.23 mi (10km)
Operating Distance LC SM for 9um cable
Connectors LC SM for 9um cable
Power Consumption 2.1w (max: 2.5w)
MTBF 459656 hr (52 years)
Safety Certification UL 1950
CSA 22.2 No. 950


Produkt Specifikationer

Mærke: Netgear
Kategori: Ikke kategoriseret
Model: AXM752

Har du brug for hjælp?

Hvis du har brug for hjælp til Netgear AXM752 stil et spørgsmål nedenfor, og andre brugere vil svare dig