Netgear FS108v2 Manual


Læs gratis den danske manual til Netgear FS108v2 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om Netgear FS108v2, eller vil du spørge andre brugere om produktet?

Side 1/2
ProSafe Fast Ethernet Switch
Step 2. Connect power Step 3. Check status
Optional
modem
Step 1. Connect equipment
FS105v2/FS108v2
Optional router
Computer Server
Internet
On
Off
Power LED
Activity (blinking)
No link (off)
(right LED)
10 Mbps link
Port LEDs
(left LED)
100 Mbps link
Installation Guide
FS105v2/FS108v2
FS105v2-FS108v2.fm Page 1 Tuesday, September 18, 2012 2:41 PM
September 2012
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,
this product should be treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is
subject to change without notice. Other brand and product names are registered trademarks or trademarks of
their respective holders. © NETGEAR, Inc. All rights reserved.
For indoor use only in all EU countries and Switzerland.
For the complete EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
Statement of Conditions: In the interest of improving internal design, operational function, and/or reliability,
NETGEAR reserves the right to make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
Specifications
Specification Description
Network interface RJ-45 connector for 10BASE-T or 100BASE-TX
Ethernet interface
Network cable Category 5 or better Ethernet cable
Ports FS105v2: 5
FS108v2:8
Power adapter 7.5V @ 1A DC input
Power consumption FS105v2: 1.5W
FS108v2: 1.8W
Weight FS105 v2: 0.2635 kg (0.58 lbs)
FS108 v2: 0.478 kg (1.054 lbs)
Dimensions
(W x D x H)
FS105 v2: 94 mm x 101 mm x 27 mm
FS108 v2: 158 mm x 101 mm x 27 mm
Operating
temperature
0 to 40° C (32 to 104° F)
Operating humidity 10% to 90% relative humidity, non-condensing
Electromagnetic
compliance
CE Class B, FCC Class B, C-Tick Class B
Safety agency
approvals
CE mark
Technical Support
After installing your device, locate the serial number on the label of your product and
use it to register your product at .
https://my.netgear.com
You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR web site.
For product updates and web support, visit .
http://support.netgear.com
FS105v2-FS108v2.fm Page 2 Tuesday, September 18, 2012 2:41 PM


Produkt Specifikationer

Mærke: Netgear
Kategori: Ikke kategoriseret
Model: FS108v2

Har du brug for hjælp?

Hvis du har brug for hjælp til Netgear FS108v2 stil et spørgsmål nedenfor, og andre brugere vil svare dig