Netgear GS110TP Manual

Netgear Ikke kategoriseret GS110TP

Læs gratis den danske manual til Netgear GS110TP (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Netgear GS110TP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

)NSTALLATION'UIDE

ProSafe® 8 Port Gigabit PoE Smart Switch™ with 2 fiber SFP GS110TP

Start Here

Follow these instructions to set up your smart switch. Before proceeding with the

smart switch installation, familiarize yourself with the contents of the Resource

CD, especially the reference manuals on your Resource CD.

First, Verify Package Contents

• ProSafe® GS110TP Smart Switch

• Rubber footpads for tabletop installation

• Power cord

• 48V/1.25A power adapter

• Wall-mount kit

•Installation Guide

•Smart Switch Resource CD that includes the NETGEAR Device Manager

Utility (Smart Control Center) and GS110TP Hardware Installation Guide. (A

link to the online GS110TP Software Administration User's Manual is on the

Resource CD.)

• Warranty/Support Information Card.

Then, Prepare to Install Your Smart Switch

Prepare a PC with an Ethernet adapter and a CD ROM drive.

Next, Install the NETGEAR Device Manager Utility

(Smart Control Center) on a PC

1. Insert the Resource CD into your CD drive.

2. Run the Setup program to install the Smart Control Center utility. The

Installation Wizard will guide you through the installation.

Next, Connect Your Smart Switch in the Correct

Order

These instructions assume you are using DHCP in your network. If you are using

static IP addressing in your network, configure the switch IP address before

connecting it to your network. In the absence of a DHCP server, the switch will

default to 192.168.0.239 for its IP address.

To configure the switch before connecting it to your network:

1. Set up the PC with a Static IP address in the 192.168.0.x subnet, and connect

the PC to the switch. Then, use the Smart Control Center utility to configure

the switch.

2. Connect each PC to an RJ-45 network port on the switch front panel.

Use category 5 (Cat5) unshielded twisted-pair (UTP) cable terminated with an

RJ-45 connector to make these connections.

Servers Computers Printers

Smart Switch

GS110TP

Power

PoE Max

Link/Act 9F Link/Act 10F

Link/Act PoE

Link/Act Mode

Green = Link at 1000M

Yellow = Link at 100M/10M

Blink = ACT

PoE Mode

Green = PoE Powered

Yellow = PoE Fault

3. Connect the switch to your network.

4. Power on the switch.

5. Verify that the PC with the Smart Control Center utility is on the same subnet

as the switch.

Now, Configure the Switch with the NETGEAR

Device Manager Utility (Smart Control Center)

1. Double-click the Smart Control Center icon on your desktop or in

Windows Start menu Programs to run the utility and view this screen.

2. Click Discover to find your switch in the network.

GS110TP_IG_8Feb10.fm Page 1 Tuesday, February 9, 2010 7:15 PM

This symbol was placed in accordance with the European Union

Directive 2002/96 on the Waste Electrical and Electronic Equipment (the

WEEE Directive). If disposed of within the European Union, this

product should be treated and recycled in accordance with the laws of

your jurisdiction implementing the WEEE Directive.

Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their

respective holders. Information is subject to change without notice.

February 2010

The Smart Control Center utility finds the switch and displays its MAC

Address, IP Address, and model number. If you cannot configure your switch,

verify that the cable connections are secure, that the IP address configuration

of the PC is in the same subnet as the switch, and click the Discover button.

3. Click to select the line displaying the details of your switch. If there are

multiple switches in your network, be sure to select the one you want to

configure.

4. Click Web Browser Access to view the switch log in screen.

5. Enter the default password of password in lower case letters and click Login.

The switch will display the switch settings main page. Configure the switch

for your network. Consult the Reference Manual on the Resource CD or the

online help in the switch for assistance with configuration procedures.

After you log in to the switch, the main Web Access menu displays.

Use the configuration menu options to configure your switch.

Troubleshooting Tips

Here are some tips for correcting simple problems you may have.

Turn on the computer and switch in the correct sequence.

Follow this sequence. Turn off the switch and computer. First, turn on the

switch and wait two minutes. Next, turn on the computer.

Make sure the Ethernet cables are securely plugged in.

For each powered on computer connected to the switch with a securely

plugged in Ethernet cable, the corresponding Smart Switch port status light

will be lit.

Make sure the network settings of the computer are correct.

In most cases, computers should be configured to obtain an IP address

automatically via DHCP. For help with this, refer to the GS110TP Software

Administration Manual; a link to the online Reference Manual is on the

Resource CD.

If your network uses static IP addresses, be sure the switch and computer are

configured with valid IP addresses.

Technical Support

Thank you for selecting NETGEAR products.

After completing the ProSafe® GS110TP Smart Switch setup, locate the serial

number on the bottom label of your product, and use it to register your product at

http://www.NETGEAR.com/register. Registration is required before you can use

our telephone support service. Registration via our website is strongly

recommended.

Go to http://kbserver.netgear.com for product updates and Web support. For

Warranty and Regional Customer Support information, see the Resource CD that

came with your product.

GS110TP_IG_8Feb10.fm Page 2 Tuesday, February 9, 2010 7:15 PM

Produkt Specifikationer

Mærke:	Netgear
Kategori:	Ikke kategoriseret
Model:	GS110TP

Har du brug for hjælp?

Hvis du har brug for hjælp til Netgear GS110TP stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Netgear Manualer

Netgear GS748Tv6 Manual

24 August 2025

Netgear GS752TSB Manual

23 August 2025

Netgear GS728TPSB Manual

22 August 2025

Netgear Orbi RBK864S Manual

21 August 2025

Netgear Orbi RBE973S Manual

21 August 2025

Netgear Orbi RBK854 Manual

21 August 2025

Netgear Orbi RBKWM Manual

21 August 2025

Netgear Orbi RBE973SB Manual

21 August 2025

Netgear Orbi RBS860 Manual

20 August 2025

Netgear Orbi RBK866SB Manual

20 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ibm System Storage N6220 Manual

12 September 2025

Autel MaxiEV BCE100 Manual

12 September 2025

M-Audio iControl Manual

12 September 2025

Steinberg VST Live 2 Manual

12 September 2025

PCE FLEX 16-E Manual

12 September 2025

Tineco iFloor 3 Breeze Manual

12 September 2025

V7 RMWC9UV450-1N Manual

12 September 2025

Parisot Taylor 2319LISU Manual

12 September 2025

Leen Bakker Bergen Manual

12 September 2025

Redragon GA-200 Manual

12 September 2025