Netgear GS116v3 Manual

Netgear Ikke kategoriseret GS116v3

Læs gratis den danske manual til Netgear GS116v3 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Netgear GS116v3, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
16-port Gigabit Ethernet Unmanaged Switch
Model GS116v3
• NETGEAR 16-port Gigabit Ethernet Unmanaged Switch Model GS116v3
• Power adapter
• Wall-mount installation kit
• Rubber feet
• Installation Guide
Package contents
November 2022
3. Connect to power
This switch is designed for indoor use only. If you want to connect it to a device located
outdoors, the outdoor device must be properly grounded and surge protected, and you
must install an Ethernet surge protector inline between the switch and the outdoor device.
Failure to do so can damage the switch.
WARNING: Before connecting this switch to outdoor cables or devices, see
https://kb.netgear.com/000057103 for safety and warranty information.
1. Register the switch
1. From a computer or mobile device that is connected to the Internet, visit
my.netgear.com.
2. Log in to your NETGEAR account.
NOTE: If you don’t have a free NETGEAR account, you can create one.
The Your Registered Products page displays.
3. Click the REGISTER NEW PRODUCT button.
4. In the SERIAL NUMBER eld,typetheserialnumberofyourswitch.
The serial number is 13 digits long. It is printed on the switch label.
5. From the PURCHASE DATE menus, select the date that you purchased the switch.
6. Click the button.REGISTER
Your switch is registered to your NETGEAR account.
AconrmationemailissenttoyourNETGEARaccountemailaddress.
Sample connections
Desktop
IP camera
Smart TV
Laptop Server
Printer
WAX214v2 AP
Desktop
GS116v3 switch
Router
Internet
4. Check the LEDs
When you connect the power adapter to the switch and plug the cable into an electrical
outlet, the LEDs indicate the status:
LED Description
Power LED
Solid green: The switch is powered on and operating normally.
Off: Power is not supplied to the switch.
Both Port LEDs
Solid green: 1 Gbps link on this port.
Blinking green: 1 Gbps activity on this port.
Off: No link is detected on this port.
Left Port LED only
Solid green: 100 Mbps link on this port.
Blinking green: 100 Mbps activity on this port.
Off: No link is detected on this port.
Right Port LED only
Solid green: 10 Mbps link on this port.
Blinking green: 10 Mbps activity on this port.
Off: No link is detected on this port.
Installation Guide
© NETGEAR, Inc., NETGEAR and the
NETGEAR Logo are trademarks of
NETGEAR, Inc. Any non-NETGEAR
trademarks are used for reference
purposes only.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD
Floor 6, Penrose Two,
Penrose Dock, Cork,
T23 YY09, Ireland
Attach the switch to a wall
To attach the switch to a wall, you need the wall-mount screws that are supplied with the
switch. These screws are 6.3 mm in diameter, 27 mm in length.
To attach the switch to a wall:
1. Locate the two mount holes on the bottom panel of the switch.
2. Mark and drill two mounting holes in the wall where you want to mount the switch.
You can mount the switch horizontally or vertically:
• :Thetwomountingholesmustbeataprecisedistanceof7.9in.Horizontally
(200mm)fromeachother.Theportsmustbeeitheratthebottomorthetopof
the switch.
• Vertically:Thetwomountingholesmustbeataprecisedistanceof7.9in.
(200mm)fromeachother.Theportsmustbeeitherattheleftortherightofthe
switch.
3. Insert the supplied anchors into the wall and tighten the supplied screws with a No. 2
Phillips screwdriver.
Leaveabout0.15in.(4mm)ofeachscrewprotrudingfromthewallsothatyoucan
insert the screws into the holes on the bottom panel.
4. Position the switch so that the mount holes are directly over the screws, and slide the
switch down until the top of each mount hole sits directly on the screw, locking the
switch securely.
Support and Community
Visit netgear.com/support to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the
device to your place of purchase within your return period.
Do not use this device outdoors.
Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz
devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation
ofthisdeviceispermittedinlargeaircraftwhileyingabove10,000feet.Operationof
transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications
with unmanned aircraft systems.
Technical specications
Specication Description
Network interfaces RJ-45 connectors that support 1000BASE-T,
100BASE-TX, and 10BASE-T
Ports 16
Network cable WerecommendthatyouuseCategory5e(Cat5e)
cables or higher rated cables for Gigabit Ethernet
connections.
Power adapter 12V @ 1.5A DC input
Maximum power consumption 8.1W
Hardware security Kensington slot
Dimensions(WxDxH) 11.3x4.0x1.1in.(286x102x27mm)
Weight 1.96lb.(890g)
Operating temperature 32to104°F(0to40°C)
Operating humidity 10 to 90% relative humidity, noncondensing
Storage temperature –4to158°F(–20to70°C)
Storage humidity 5 to 95% relative humidity, noncondensing
Maximum operating and
storage altitude
10,000ft.(3,000m)
Electromagneticcertications
and compliance
EMC class A device, FCC, ISED, CE, RCM, VCCI, BSMI,
KC
Safetycertications CB, CE LVD, BSMI, RCM

Produkt Specifikationer

Mærke: Netgear
Kategori: Ikke kategoriseret
Model: GS116v3

Har du brug for hjælp?

Hvis du har brug for hjælp til Netgear GS116v3 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Netgear Manualer

Netgear

Netgear Nighthawk M6 MR6220 Manual

8 August 2025
Netgear

Netgear APS600W Manual

7 August 2025
Netgear

Netgear Orbi RBRE960B Manual

7 August 2025
Netgear

Netgear Nighthawk A9000 Manual

25 Juli 2025
Netgear

Netgear PL1000-100PES Manual

9 Juli 2025
Netgear

Netgear M4300-24X24F Manual

7 Juli 2025
Netgear

Netgear APS1000W Manual

26 Juni 2025
Netgear

Netgear GS116v3 Manual

17 Juni 2025
Netgear

Netgear GS728TXUPv3 Manual

17 Juni 2025
Netgear

Netgear GS108EPP Manual

7 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Daikin

Daikin ALB02LBMNADBT00 Manual

11 August 2025
Daikin

Daikin EKEXVA450 Manual

11 August 2025
Jane

Jane Moon Manual

11 August 2025
Standard Horizon

Standard Horizon Quest GX1500S Manual

11 August 2025
Daikin

Daikin EWYD6004ZXSB2 Manual

11 August 2025
Daikin

Daikin EWYD410BZSS Manual

11 August 2025
Samsung

Samsung MXJ-YA1509MDZ Manual

11 August 2025
DJI

DJI High-Bright Remote Monitor Manual

11 August 2025
Daikin

Daikin ERQ125A7V1B Manual

11 August 2025
Daikin

Daikin ALB06LBSNADBT00 Manual

11 August 2025